Abstract:This study investigated the phenomena associated with the separation and purification of biodiesel produced from Ricinus communis oil seeds using experimental and theoretical approaches. The alkaline transesterification technique was used to produce the biodiesel from the Ricinus communis oil seeds which were later compared with standards based on EN and ASTM. Experimental investigation of the components in the mixture for separation and purification was conducted using the standard turbidimetric method for binodal solubility and tie-line compositions. The gas chromatographic technique was used to determine the composition of the homogeneous mixture. Novel components separation and purification of the Ricinus communis seed oil biodiesel was achieved using ternary diagrams highlighting the constituent components of the biodiesel at different temperatures for enhanced separation and purification. At the coexisting extract and raffinate phases, the orientation angle of the component compositions increases as the methanol concentration increases and temperature increases. The analysis of seed oil in terms of its physicochemical properties showed density, refractive index, acid value, and free fatty acid values of 905 kg/m3, 1.486, 0.79 mg KOH/g, and 0.390 mg KOH/g respectively. The fatty acid composition of the seed oil and biodiesel revealed that the major characteristics of the oil and biodiesel were defined by the presence of linoleic acid (C18:2) and a ricinoleic acid hydroxyl group (C18:1, OH) with compositions of approximately 30% and 20% respectively. Fourier Transform Infra-Red (FTIR) spectrometry analysis of the oil and biodiesel showed that the absorption spectrum in terms of the wave number (cm-1) ranged from 1000 to 4000 cm-1 with esters as the main functional group providing the main structural backbone. The presence of different fatty acids leads to lateral homogeneity of the biodiesel molecules which can serve to organize the molecules into discrete domains with different properties for enhanced separation and purification at the investigated temperatures. Optimal separation and purification were achieved at the different temperatures showing the castor oil biodiesel, glycerol, and methanol components system at the prevailing composition, time, and temperatures from the tie-lines and binodal solubility compositions. This approach provides a means for the design of a more efficient separation process for optimal biodiesel purification after production with knowledge of how the components are distributed in the ternary mixture after the transesterification reaction. This, leads to greater efficiency of the process, reducing material and operational costs and eliminating environmental issues linked with the biodiesel production process as the volume of wastewater generated would be hugely eradicated. The findings of this study will be useful in the setting up of a small-to-medium-size biodiesel production facility with improvement in the efficiency of product separation and purification.

Ultrafiltration of Triglyceride from Biodiesel Using the Phase Diagram of Oil–fame–meoh

Vacuum distillation of C16 methylester and C18 methylester in biodiesel

Application of UNIQUAC and SVM to Ultrafiltration for Modeling Ternary Mixtures of Oil, FAME and Methanol

Study on membrane reactors for biodiesel production by phase behaviors of canola oil methanolysis in batch reactors.

Highly efficient procedure for the transesterification of vegetable oil

Study on Oil Separation from Oil/Water Emulsion via Coagulation and Ultrafiltration

Transesterification of Methyl Oleate for Sustainable Production of Biolubricant: Process Optimization and Kinetic Study

Modeling and Simulation of Biodiesel Production Using a Membrane Reactor Integrated with a Prereactor

Liquid-liquid equilibrium of FAEs – glycerol phase – ethanol in the ethanol regeneration and FAE separation stage

Liquid–Liquid Equilibrium of Sesame Fatty Acid (Ethyl and Methyl) Ester + Glycerol + Ethanol/Methanol Mixtures at Different Temperatures

Efficient separation and quantification of methyl palmitate and methyl oleate in biodiesel mixture using reverse-phase high performance liquid chromatography

Solvent-free Lipid Extraction from Microalgal Biomass with Subcritical Water in a Continuous Flow Reactor for Acid-Catalyzed Biodiesel Production

Glycerol Esterification of Free Fatty Acids Catalyzed by Zinc Glycerolate for Biodiesel Production from Acidified Palm Oil: Optimization, Kinetic Study, and Process Evaluation

Comparison of Membrane Extraction with Traditional Extraction Methods for Biodiesel Production

Integrated Approach: Characterization, Application of Alumina Kaolin Membrane for Glycerol Separation in Biodiesel Production, and Flux Recovery Strategies

Continuous biodiesel production from acidic oil using a combination of the acid-, alkali-catalyzed membrane and GO/PVDF separation membrane

Separation of Highly Unsaturated Fatty Acid Methyl Esters from Model Bio-Oils with Ionic Liquid-Cosolvent As Extractants

Liquid–Liquid Equilibrium for Systems of (Fatty Acid Ethyl Esters + Ethanol + Soybean Oil and Fatty Acid Ethyl Esters + Ethanol + Glycerol)

Continuous production of biodiesel fuel from vegetable oil using supercritical methanol process

Experimental and theoretical assessment of phenomena linked with separation and purification of biodiesel from Ricinus communis seed oil

Liquid liquid equilibrium for systems of (fatty acid ethyl esters plus ethanol plus soybean oil and fatty acid ethyl esters plus ethanol plus glycerol)