Abstract:Continuum manipulators have infinite degrees of freedom and high flexibility, making it challenging for accurate modeling and control. Some common modeling methods include mechanical modeling strategy, neural network strategy, constant curvature assumption, etc. However, the inverse kinematics of the mechanical modeling strategy is difficult to obtain while a strategy using neural networks may not converge in some applications. For algorithm implementation, the constant curvature assumption is used as the basis to design the controller. When the driving wire is tight, the linear controller under constant curvature assumption works well in manipulator position control. However, this assumption of linearity between the deformation angle and the driving input value breaks upon repeated use of the driving wires which get inevitably lengthened. This degrades the accuracy of the controller. In this work, the Koopman theory is used to identify the nonlinear model of the continuum manipulator. Under the linearized model, the control input is obtained through model predictive control (MPC). As the lifted function can affect the effectiveness of the Koopman operator-based MPC (K-MPC), a novel design method of the lifted function through the Legendre polynomial is proposed. To attain higher control efficiency and computational accuracy, we use a selective control scheme according to the state of the driving wires. When the driving wire is tight, the linear controller is employed; otherwise, the K-MPC is adopted. Finally, a set of static and dynamic experiments have been conducted using an experimental prototype. The results demonstrate high effectiveness and good performance of the selective control scheme.

Robust Control of a 3-DOF Hybrid Robot Manipulator

Adaptive robust posture control of a parallel manipulator driven by pneumatic muscles

Adaptive Robust Posture Control of A Pneumatic Muscles Driven Parallel Manipulator with Redundancy

Dynamic Modeling and Robust Control in Task Space of 4-DOF Parallel Electric Platform with 4TPS-1PS Structure

Trajectory Tracking Control of a 6-DOF Hydraulic Parallel Robot Manipulator with Uncertain Load Disturbances

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Hybrid Motion/Force Control of the Hydraulic Cooperative Manipulator in Constrained Motion

Robust Nonlinear Control of a Planar 2-DOF Parallel Manipulator with Redundant Actuation

Dynamics and Control of a Novel 3 -DOF Parallel Manipulator with Actuation Redundancy.

Robust Control of Wheeled Mobile Manipulators Using Hybird Joints

Enhanced Robust Motion Control based on Unknown System Dynamics Estimator for Robot Manipulators

The robust control scheme for free-floating space manipulator to track the desired trajectory in jointspace

Robust Tracking Control of Electrical Driven Free-Floating Space Robot Manipulators

Robust tracking control for a 3DOF helicopter with multi-operation points

Robotic Manipulator Control Based on Disturbance Observer: A High-Order Fully Actuated System Approach

Robust Dexterous Manipulation Under Object Dynamics Uncertainties

The Robust Adaptive Control of Free-Floating Space Manipulator Systems

Robust tracking control of flexible manipulators using hybrid backstepping/nonlinear reduced-order active disturbance rejection control

Robust Position Control of a Continuum Manipulator Based on Selective Approach and Koopman Operator

Robust Approach for Humanoid Joint Control Based on A Disturbance Observer

Model-based control of spatial 6-DOF hydraulic parallel robot manipulator