Abstract:The rotary draw bending of double-ridged rectangular tube is a complex nonlinear physical process with multifactors coupling effects. Processing parameters, especially clearances and friction coefficients between tube and various dies, have a significant effect on the forming quality of the double-ridged rectangular tube in rotary draw bending. If the values of these processing parameters are inappropriate, some defects including cross-sectional deformation, wall thinning, and wall thickening easily occur in the bending process of double-ridged rectangular tube. So optimization of these processing parameters is of great importance to control these defects. Based on the grey relational analysis method combined with the orthogonal experimental design and finite element simulation, a grey relational analysis model was established for the rotary draw bending process of double-ridged rectangular H96 brass tube. With the model, optimization of clearances and friction coefficients between tube and various dies was implemented with consideration of interactive effects of the above defects. The results show that (1) the main factors influencing cross-sectional deformation, wall thickening, and wall thinning are tube–mandrel clearance Δc m, tube-bending die clearance Δc b, and tube–mandrel clearance Δc m, respectively. (2) The optimal values of clearances Δc m, Δc p, Δc w, and Δc b and friction coefficients μm, μp, μw, and μb of tube–mandrel, tube–pressure die, tube–wiper die, and tube-bending die are 0.15, 0.2, 0.2, 0.2, 0.02, 0.3, 0.06 and 0.17 mm, respectively. Furthermore, the verification for the optimal values of these processing parameters was carried out, and the double-ridged rectangular H96 bent tube obtained by using the optimal values of these processing parameters has the minimum values of cross-sectional deformation, wall thinning, and wall thickening and can satisfy the national aviation industry standards.

Process optimization of the inverting—forming of thin-walled tubes with radiused dies

Systematic Solving of Machining Deformation and Process Optimization for Complex Thin-walled Parts

Optimization of Die Design for Thin-Walled Flat Multi-Port Tube with the Aid of Finite Element Simulation

Optimal Design of Process Parameters of Rotary-Draw Bending Process for Thin-Walled Rectangular Tube of Aluminum Alloy

Dynamic Optimization of Die-Less Spinning Process Through Autonomous Modeling of Time-Varying Forming Law

Optimization of an Asymmetric Thin-Walled Tube in Rotary Draw Bending Process

A Study on Stepwise Optimization of Forming Parameters for Thin-Walled Tube Nc Bending

Experimental Study of the Tube Axial Compression Forming Process with Free Dieless Deformation

Approach Based on Response-Surface Method to Optimize Lining of Dies Used in 3D Free-Bending Forming Technology

Drawing Process Optimization of Thin-walled Aluminum Tube Based on Numerical Simulation

An Incremental Die Forging Process for Producing Helical Tubes

FEM Analysis of Mechanism of Free Deformation under Dieless Constraint in Axial Compressive Forming Process of Tube

Hydroforming Process Robust Optimization for a Tubular Part with Complex Shape

Analysis and Optimization of Drawing Deformation Process Based on Numerical Simulation

Significance-based Optimization of Processing Parameters for Thin-Walled Aluminum Alloy Tube NC Bending with Small Bending Radius

Optimization of Processing Parameters for Double-Ridged Rectangular Tube Rotary Draw Bending Based on Grey Relational Analysis

Optimization of forming process for one kind of large thin-wall dished head

A New Approach of Die Shape Optimization for Sheet Metal Forming Processes

Optimization of Processing Parameters of Aluminum Alloy Cylindrical Parts Based on Response Surface Method during Hydromechanical Deep Drawing

Optimum Design of Assembled Cavity Dies for Precision Forging Process

Study on Roll Forming Process Simulation and Roll Diameters Optimization