Hydrogen-bonding Based Multilayer Assemblies by Self-Deposition of Dendrimer.

FW Huo,HP Xu,L Zhang,Y Fu,ZQ Wang,X Zhang

DOI: https://doi.org/10.1039/b300405h

IF: 4.9

2003-01-01

Chemical Communications

Abstract:We reported on hydrogen-bonding directed Layer-by-Layer assemblies by self-deposition of a kind of dendrimer bearing carboxyl groups on its periphery that act as hydrogen bonding donor as well as hydrogen bonding acceptor.

What problem does this paper attempt to address?

Alternating Deposition Multilayer Films of Dendrimers/Poly(4-Vinylpyridine) Based on Hydrogen Bonding

Jing Sun,Liyan Wang,Jian Gao,Xi Yu,Xi Zhang

DOI: https://doi.org/10.1007/bf02897582

2005-01-01

Chinese Science Bulletin

Abstract:Layer-by-layer (LbL) assembly technique has been an important method for constructing layered nanostructural materials[1-4]. Although the electrostatic interaction is the primary driving force for building LbL multilayers, our group[5] and other group[6] have reported early that hydrogen bonding interaction can be also used as the driving force.
Discrete and Polymeric Self-Assembled Dendrimers: Hydrogen Bond-Mediated Assembly with High Stability and High Fidelity

PS Corbin,LJ Lawless,ZT Li,YG Ma,MJ Witmer,SC Zimmerman

DOI: https://doi.org/10.1073/pnas.062641199

2002-01-01

Abstract:Hydrogen bond-mediated self-assembly is a powerful strategy for creating nanoscale structures. However, little is known about the fidelity of assembly processes that must occur when similar and potentially competing hydrogen-bonding motifs are present. Furthermore, there is a continuing need for new modules and strategies that can amplify the relatively weak strength of a hydrogen bond to give more stable assemblies. Herein we report quantitative complexation studies on a ureidodeazapterin-based module revealing an unprecedented stability for dimers of its self-complementary acceptoracceptor-donor-donor (AADD) array. Linking two such units together with a semirigid spacer that carries a first-, second-, or third-generation Fréchet-type dendron affords a ditopic structure programmed to self assemble. The specific structure that is formed depends both on the size of the dendron and the solvent, but all of the assemblies have exceptionally high stability. The largest discrete nanoscale assembly is a hexamer with a molecular mass of about 17.8 kDa. It is stabilized by 30 hydrogen bonds, including six AADD⋅DDAA contacts. The hexamer forms and is indefinitely stable in the presence of a hexamer containing six ADD⋅DAA hydrogen-bonding arrays.
Hydrogen-Bonded Dendronized Polymers and Their Self-Assembly in Solution

Dang Xie,Ming Jiang,Guangzhao Zhang,Daoyong Chen

DOI: https://doi.org/10.1002/chem.200601361

2007-01-01

Chemistry

Abstract:Frechet-type benzyl ether dendrons of second and third generations with a carboxyl group (G2, G3) at the apex site could attach to poly(4-vinylpyridine) (PVP), forming hydrogen-bonded dendronized polymers (HB denpols) in their common solvent, chloroform. The HB denpols show unique self-assembly behavior, forming vesicles in the common solvent under ultrasonic treatment. The structure and morphology of the vesicles were characterized by dynamic light scattering (DLS), static light scattering (SLS), SEM, TEM, and AFM. The size of the vesicles decreases and the thickness of the vascular membrane increases as the molar ratio of Gx/PVP increases. The hydrogen bonding, pi-pi aromatic stacking of the dendrons, and the considerable difference in architecture between the dendron Gx and PVP are the main factors facilitating the assembly of the HB denpols in the common solvent.
Hydrogen-Bonding-Directed Layer-by-Layer Assembly of Conjugated Polymers

Z. Liang,O. M. Cabarcos,D. L. Allara,Q. Wang

DOI: https://doi.org/10.1002/adma.200305793

IF: 29.4

2004-01-01

Advanced Materials

Abstract:Poly(phenylenevinylene) polymers, functionalized with either amine or carboxyl acid groups (see Figure), have been synthesized and assembled using layer-by-layer deposition. This hydrogen-bonding-driven self-assembly produces conjugated polymer multilayer films with molecular-level controlled thickness and architecture. The approach enables the creation of robust thin films via a thermally induced cross-linking reaction.
Modulating Vectored Non-Covalent Interactions for Layered Assembly with Engineerable Properties

Zhang Jiahao,Guerin Sarah,Wu Haoran,Xue Bin,Cao Yi,Tofail Syed A. M.,Wang Yancheng,Thompson Damien,Wang Wei,Tao Kai,Mei Deqing,Gazit Ehud

DOI: https://doi.org/10.1007/s42242-022-00186-3

2022-01-01

Bio-Design and Manufacturing

Abstract:Vectored non-covalent interactions—mainly hydrogen bonding and aromatic interactions—extensively contribute to (bio)-organic self-assembling processes and significantly impact the physicochemical properties of the associated superstructures. However, vectored non-covalent interaction-driven assembly occurs mainly along one-dimensional (1D) or three-dimensional (3D) directions, and a two-dimensional (2D) orientation, especially that of multilayered, graphene-like assembly, has been reported less. In this present research, by introducing amino, hydroxyl, and phenyl moieties to the triazine skeleton, supramolecular layered assembly is achieved by vectored non-covalent interactions. The planar hydrogen bonding network results in high stability, with a thermal sustainability of up to about 330 °C and a Young’s modulus of up to about 40 GPa. Upon introducing wrinkles by biased hydrogen bonding or aromatic interactions to disturb the planar organization, the stability attenuates. However, the intertwined aromatic interactions prompt a red edge excitation shift effect inside the assemblies, inducing broad-spectrum fluorescence covering nearly the entire visible light region (400–650 nm). We show that bionic, superhydrophobic, pillar-like arrays with contact angles of up to about 170° can be engineered by aromatic interactions using a physical vapor deposition approach, which cannot be realized through hydrogen bonding. Our findings show the feasibility of 2D assembly with engineerable properties by modulating vectored non-covalent interactions.
Two-Dimensional Self-Assembly Into Multicomponent Hydrogen-Bonded Nanostructures

S De Feyter,A Miura,S Yao,Z Chen,F Wurthner,P Jonkheijm,Aphj Schenning,Ew Meijer,Fc De Schryver

DOI: https://doi.org/10.1021/nl048360y

IF: 10.8

2005-01-01

Nano Letters

Abstract:By means of scanning tunneling microscopy, we have explored the two-dimensional self-assembly of functional bicomponent hydrogen-bonding dye systems, leading to well-defined patterns, different from those of the individual components, and providing design rules to immobilize multicomponent systems at the liquid-solid interface.
Hydrogen Bond Partner Reorganization in the Coadsorption of a Monodendron and Pyridylethynyl Derivatives

Xu Zhang,Ting Chen,Hui-Juan Yan,Dong Wang,Qing-Hua Fan,Li-Jun Wan,Koushik Ghosh,Hai-Bo Yang,Peter J. Stang

DOI: https://doi.org/10.1021/la1037876

IF: 3.9

2010-01-01

Langmuir

Abstract:Hydrogen bonds with high selectivity and directionality are significant in harnessing molecules to form 2D supramolecular nanostructures. The competition and reorganization of hydrogen bond partners determine the ultimate molecular assembly and pattern in a 2D supramolecular system. In this study, multicomponent assemblies of a monodendron (5-benzyloxy-isophthalic acid derivative, BIC) and pyridylethynyl derivatives [1,4-bis(4-pyridylethynyl)-2,3-bis-dodecyloxy-benzene (PBPC12) and 1,4-bis(4-pyridylethynyl)-2,3-bis-octadecyloxy-benzene (PBPC18)] have been studied by scanning tunneling microscopy (STM) on a graphite surface. BIC molecules are able to associate with PBPC12 and PBPC18 molecules to induce the rearrangement of hydrogen bond partners and form coassembly structures. Interestingly, BIC acts as a template molecule in the coassembly process, and these multicomponent structures exhibit similar structural features to the assembly structures of BIC itself. The structural details of the coassembled structures are revealed by high-resolution STM images, and their relationship with the original BIC assemblies is discussed. These results provide important insights into the design and fabrication of hydrogen-bond-directed multicomponent molecular nanostructures on solid surfaces.
Hydrogen Bonding Directed Self-Assembly Of Small-Molecule Amphiphiles In Water

Jiang-Fei Xu,Li-Ya Niu,Yu-Zhe Chen,Li-Zhu Wu,Chen-Ho Tung,Qing-Zheng Yang

DOI: https://doi.org/10.1021/ol501841f

IF: 5.2

2014-01-01

Organic Letters

Abstract:Compounds comprising one or two quadruply hydrogen bonding units, 2-ureido-4[1H]-pyrimidinone (UPy) and tris(tetraethylene glycol monomethyl ether) moieties, were reported to form highly stable hydrogen-bonded assemblies in water. Compound 1, containing one UPy, assembles into vesicles, and compound 2, containing two UPy units, forms micelles. The aggregates disassemble reversibly when the solution pH is raised to 9.0 or above. The results demonstrate the utility of hydrogen bonding to direct the self-assembly of small-molecule building blocks in aqueous media.
Hierarchical Self-Assembling of Dendritic–linear Diblock Complex Based on Hydrogen Bonding

Qingtao Liu,Hui Zhang,Shengyan Yin,Lixin Wu,Chen Shao,Zhongmin Su

DOI: https://doi.org/10.1016/j.polymer.2007.04.041

IF: 4.6

2007-01-01

Polymer

Abstract:An effective route was demonstrated to fabricate vesicles, cylindrical micelles, fibers and hierarchical structures by using dendritic-linear amphiphilic diblock complex as building block through hydrogen bonding. We tailored the formation and evolution of these aggregation morphologies as well as the transformation among them, and found that the concentration and solvent polarity could affect the aggregation states of the complex in solution and the self-assembling process on solid substrate. Additionally, the flexible-rigid structure of the complex and the template effect of DMSO droplets resulting from solvent evaporation also play important roles in constructing higher level organized structures such as hierarchical wreath-like and hollow entanglement self-assemblies at solid-gas interface. The cast film of the complex which possesses a fibrous structure shows superhydrophobicity and when the solution was allowed to stand for some days, a transparent organic gel spontaneously formed from the mixed solution. Based on the experiment results, the hierarchical architectures are proposed to derive from primary fibrils. The structure of the cylindrical micelle is believed to possess an alkyl chain block shell and a poly(ethylene oxide) block core, which is consistent with the water contact angle measurement and the simulation to the volume ratio of the two blocks of the complex. (C) 2007 Elsevier Ltd. All rights reserved.
Quadruply Hydrogen Bonded Dimers And Self-Assembly

Zhi Q. Qi,Xuebin Shao,Xin Zhao,XiaoQiang Li,Xiaozhong Wang,Weixing Zhang,Xikui Jiang,Zhanting Li

DOI: https://doi.org/10.3321/j.issn:0253-2786.2003.05.001

2003-01-01

Chinese Journal of Organic Chemistry

Abstract:Recent progresses in developing quadruply hydrogen bonded homo- and hetero-dimers and their applications in self-assembly of supramolecular oligo- and poly-mers, of well-established structures are described.
Self-Assembled Multilayer Films Based on Dendrimers with Covalent Interlayer Linkage

JF Wang,XR Jia,H Zhong,YF Luo,XS Zhao,WX Cao,MQ Li

DOI: https://doi.org/10.1021/cm010922g

IF: 10.508

2002-01-01

Chemistry of Materials

Abstract:Multilayer ultrathin films composed of nitro-containing diazoresin (NDR) as polycation and poly(amidoamine) dendrimers with carboxyl terminal groups (PAMAMC) (G = 1.5, 2.5, 3.5, and 4.5) as polyanion were fabricated on mica by electrostatic layer-by-layer deposition. Subsequent UV irradiation converted the interlayer linkage from ionic to covalent. The films were characterized with UV-vis, FTIR, X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and X-ray diffraction (XRD). The results show that the uniform multilayer films were formed. All the films with dendrimers of various generations as building blocks have a very smooth surface with a mean roughness of about 0.8-1.1 nm. The thickness of the PAMAMC-NDR bilayer in the films increases with the generation number of the dendrimer, but the average thickness of the dendrimer monolayer is smaller than the diameter of the ideal spherical model of dendrimers with an extended conformation of all branches. They are significantly compressed in multilayer films. The conversion of the ionic to covalent linkage dramatically improved the stability of the films with respect to polar solvent, strong electrolyte, and surfactant solutions.
Hydrogen Bonded Supramolecular Polymers in Both Apolar and Aqueous Media: Self-Assembly and Reversible Conversion of Vesicles and Gels

Du Ping,Kong Jun,Wang Guitao,Zhao Xin,Li Guangyu,Jiang Xikui,Li Zhanting

DOI: https://doi.org/10.1002/cjoc.201100254

IF: 5.56

2011-01-01

Chinese Journal of Chemistry

Abstract:In a preliminary letter (Tetrahedron Lett. 2010, 51, 188), we reported two new hydrazide-based quadruple hydrogen-bonding motifs, this is, two monopodal (la and 1b) and five dipodal (2a, 2b and 3a-3c) aromatic hydrazide derivatives, and the formation of supramolecular polymers and vesicles from the dipodal motifs in hydrocarbons. In this paper, we present a full picture on the properties of these hydrogen-bonding motifs with an emphasis on their self-assembling behaviors in aqueous media. SEM, AFM, TEM and fluorescent micrographs indicate that all the dipodal compounds also form vesicles in polar methanol and water-methanol (up to 50% of water) mixtures. Control experiments show that 1b does not form vesicles in same media. Addition of 1b to the solution of the dipodal compounds inhibits the latter's capacity of forming vesicles. At high concentrations, 3b and 3c also gelate discrete solvents, including hydrocarbons, esters, methanol, and methanol-water mixture. Concentration-dependent SEM investigations reveal that the vesicles of 3b and 3c fuse to form gels and the gel of 3c can de-aggregate to form the vesicles reversibly.
Multiple Hydrogen Bonding Induced Self-Assembly: Transformation from Nanofibrils to Nanosphere with Aromatic Oligoamide Incorporated Polyethylene Glycol

Yumin Zhu,Chao Chen,Nagarajan Sangaraiah,Vijaya Kumar Kannekanti,Lihua Yuan,Wen Feng

DOI: https://doi.org/10.1007/s13738-018-1472-2

2018-01-01

Journal of the Iranian Chemical Society

Abstract:Aromatic oligoamides bearing six potential hydrogen-bonding sites were designed and synthesized. Functionalized with two polyethylene glycol ( M w = 2000), this aromatic oligoamide could self-assemble via hydrogen bonds to form nanofibrils in nonpolar solvents as a result of aggregation. The resulting aggregates were characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM) and dynamic light scattering (DLS). Upon adding another aromatic oligoamide containing complementary hydrogen bond donors and acceptors, transformation from nanofibrils to nanosphere was observed due to formation of hydrogen-bonded duplex. The nanospherical micelle was corroborated by SEM, transmission electron microscopy (TEM) and AFM tests. The results achieved here demonstrate an alternative route to effect supramolecular structures via multiple hydrogen bonding-induced self-assembly process.
Supramolecular Polymer Chemistry: Design, Synthesis, Characterization, and Kinetics, Thermodynamics, and Fidelity of Formation of Self-Assembled Dendrimers

FW Zeng,SC Zimmerman,SV Kolotuchin,DEC Reichert,YG Ma

DOI: https://doi.org/10.1016/s0040-4020(01)01113-9

IF: 2.388

2002-01-01

Tetrahedron

Abstract:Dendrimers 1a–d were synthesized in 10 steps from dendrons 4–7, bromobenzene and succinic anhydride. Tetraacids 1e and 1f were prepared in an analogous fashion. The aggregation of 1a–f was studied in solution by size exclusion chromatography (SEC), vapor pressure osmometry (VPO), low angle laser light scattering (LLS), small angle neutron scattering (SANS), and by 1H NMR. The data are consistent with a stable, discrete hexameric aggregate for 1b–d in methylene chloride, non-discrete polymeric aggregates for 1a, 1e, and 1f, and monomers for all compounds in tetrahydrofuran and dimethyl sulfoxide. Kinetic and thermodynamic studies and mixing experiments confirmed the highly cooperative nature of the self-assembly process.
Ribbonlike Assembly of Molecules Composed of Fulleropyrrolidine and Pua Dendron

Bo Liu,Miao Yang,Zijian Zhang,Guoliang Zhang,Yaokun Han,Nan Xia,Minbiao Hu,Ping Zheng,Wei Wang

DOI: https://doi.org/10.1021/la101147x

IF: 3.9

2010-01-01

Langmuir

Abstract:The hybrid molecules composed of fulleropyrrolidine and poly(urethane amide) dendron of the third generation have been synthesized, and their self-assembling in THF/water mixtures has been studied. By TEM, AFM, and SAXS methods it was established that molecules form ribbonlike aggregates with the ordered layers of fullerene derivatives situated inside of the ribbons. Microscale length and high ratio width/thickness were detected for the ribbons. The ability of amides and urethanes to initiate a coupling of dendron fragments by means of hydrogen bonding has been considered as mainly responsible for anisotropic interaction of hybrid molecules and for the ribbonlike aggregates formation in THF/water mixtures.
Self-assembly of hybrid dendrons into doubly segregated supramolecular polyhedral columns and vesicles.

Mihai Peterca,Mohammad R Imam,Pawaret Leowanawat,Brad M Rosen,Daniela A Wilson,Christopher J Wilson,Xiangbing Zeng,Goran Ungar,Paul A Heiney,Virgil Percec

DOI: https://doi.org/10.1021/ja104432d

IF: 15

2010-01-01

Journal of the American Chemical Society

Abstract:The synthesis and structural analysis of supramolecular dendrimers self-assembled from 3 libraries containing 20 first-generation hybrid dendrons are reported. Combinations of benzyl ether, naphthyl methyl ether, and biphenyl methyl ether repeat units with different alkyl cartxmlates at the apex of the dendron decreased its molecular solid angle to values that led to the discovery of a new mechanism of self-assembly. This new self-assembly mechanism generated a diversity of unprecedented supramolecular assemblies, including hollow and nonhollow singly or doubly segregated supramolecular columns and vesicles exhibiting polyhedral shapes. The polyhedral shape of the self-organized supramolecular dendrimers was demonstrated to be an intrinsic characteristic of all the doubly segregated structures. The self-assembly mechanism elucidated here provides access to new strategies that will be used to fabricate complex supramolecular organizations.
Supramolecular polymer chemistry: self-assembling dendrimers using the DDA.AAD (GC-like) hydrogen bonding motif.

Yuguo Ma,Sergei V Kolotuchin,Steven C Zimmerman

DOI: https://doi.org/10.1021/ja0202006

IF: 15

2002-01-01

Journal of the American Chemical Society

Abstract:Heterocyclic unit 2 containing complementary donor-donor-acceptor (DDA) and acceptor-acceptor-donor (AAD) hydrogen bonding arrays at an angle of about 601 Was designed to self-assemble into a hexamer. To investigate whether this unit could self-assemble dendrimers, the 2,8-diamino-2-N-ethylpyrimido-(4,5-b)(1, 8)naphthyridine-3H-4-one subunit was synthesized with a first (2a), second (2b), and third generation (2c) Frechet-type dendron attached to the 8-amino group. The synthesis of 2a-c was accomplished in 11 steps beginning with 2,6-diaminopyridine and the corresponding dendron bromide. Studies using H-1 NMR, size exclusion chromatography (SEC), and dynamic light scattering (DLS) support the cooperative formation of cyclic hexamers in apolar solvents. The stability of the self-assembled dendrimers is dependent on the size of the attached dendron, and mixing studies with 2a-c indicate their usefulness in constructing dynamic combinatorial libraries.
Synthesis and Self-Assembly of Dna-Aliphatic Polyether Dendron Hybrids

Zhao Zhiyong,Wu Fen,Yang Zhongqiang,Liu Dongsheng,Fan Qing-Hua

DOI: https://doi.org/10.6023/a13010087

2013-01-01

Abstract:A new kind of amphiphilic DNA-aliphatic polyether dendron hybrids consisting of a flexible hydrophobic polyether dendron and a single stranded DNA are synthesized, which are characterized by MALDI-TOF mass spectroscopy, HPLC and polyacrylamide gel electrophoresis (PAGE). In aqueous solution, as DNA length shortens from 24 mer to 18 mer, to 12 mer, to 6 mer, the hydrophilic DNA content in the DNA-aliphatic polyether dendron hybrid decreases, the morphology of the aggregates change from spherical micelles to nanofibers, and to irregular clusters. These different assemblies from DNA-aliphatic polyether dendron hybrids in aqueous solution are depended on the hydrophobic/hydrophilic ratio between the polyether dendron skeleton and DNA strand. However, when adding 1/10 (VIV) organic solvents such as dichloromethane (DCM), diethyl ether (EtOEt) or tetrahydrofuran (THF) into aqueous solution and after the assembling process that the sample solution is heated to 90 degrees C for 30 min and subsequently cooled to room temperature overnight, the third generation dendron conjugated 18 mer DNA hybrid could assemble into nanofibers. Meanwhile, in the THF/H2O (1: 10, V/Y) mixed solvents, with the same assembling process, as different dendron generations (the second or third generation) and different DNA lengths (6 mer, 12 mer, 18 mer or 24 mer) in the hybrids, all these hybrids could assemble into long nanofibers. The assembled structures have been characterized by transmission electron microscopy (TEM), atomic force microscope (AFM), dynamic light scattering (DLS) and fluorescent experiments. Subsequently, we verified the assembling mechanism that the spherical micelles and nanofibers contain a hydrophobic dendron core and a hydrophilic DNA shell by hydrophobic fluorescent molecule Nile Red encapsulation experiment and precise DNA hybridization to load gold nanoparticles at a size of 10 nm. The hybridization property of DNA at the shell associated with the encapsulation ability of dendron at the inner core indicated the potential application in gene or drug delivery and nanotechnology.
A Programmed Hydrogen Bonding Array Self-Assembles into a Polymeric Zipper-Like Architecture

Y Yang,YZ Zhang,YL Tang,CF Chen

DOI: https://doi.org/10.1039/b515559b

IF: 3.3

2006-01-01

New Journal of Chemistry

Abstract:With two hydrazide motifs installed at one edge, a novel supramolecular system self-assembled into a polymeric zipper-like structure via two hydrogen bonds at each knot, both in solution and in the solid state.
Hydrogen-Bonding-Directed Layer-By-Layer Assembly Of Dendrimer And Poly(4-Vinylpyridine) And Micropore Formation By Post-Base Treatment

Hongyu Zhang,Yu Fu,Dong Wang,Liyan Wang,Zhiqiang Wang,Xi Zhang

DOI: https://doi.org/10.1021/la035036u

IF: 3.9

2003-01-01

Langmuir

Abstract:We reported a way to fabricate microporous films by post-base treatment of hydrogen-bonding-directed multilayer films of poly(4-vinylpyridine) (PVP) and carboxyl-terminated polyether dendrimer (DEN-COOH). The PVP/DEN-COOH multilayer film was fabricated by layer-by-layer assembly of PVP and DEN-COOH from a methanol solution. UV-visible spectroscopy revealed a uniform deposition process. The interaction between PVP and DEN-COOH was identified as hydrogen bonding through Fourier transform infrared (FT-IR) spectroscopy. Meanwhile, the composition change of a PVP/DEN-COOH multilayer film in a basic solution was detected by X-ray photoelectron spectroscopy and UV-visible spectroscopy, and the morphology variation was observed by atomic force microscopy. A two-step variation was observed: the dissolution of DEN-COOH from the multilayer into the basic solution and the gradual reconformation of PVP polymer chains remaining on the substrate, which produced a microporous film. Interestingly, compared with our previous PVP/poly(acrylic acid) (PAA) system under the same conditions, the release of DEN-COOH from a PVP/DEN-COOH multilayer is slower than that of PAA, and the microporous morphology is also different, which indicates that the molecular structure of a building block has a remarkable influence on the variation of a hydrogen-bonding-directed film in a basic solution.

Hydrogen-bonding Based Multilayer Assemblies by Self-Deposition of Dendrimer.

Alternating Deposition Multilayer Films of Dendrimers/Poly(4-Vinylpyridine) Based on Hydrogen Bonding

Discrete and Polymeric Self-Assembled Dendrimers: Hydrogen Bond-Mediated Assembly with High Stability and High Fidelity

Hydrogen-Bonded Dendronized Polymers and Their Self-Assembly in Solution

Hydrogen-Bonding-Directed Layer-by-Layer Assembly of Conjugated Polymers

Modulating Vectored Non-Covalent Interactions for Layered Assembly with Engineerable Properties

Two-Dimensional Self-Assembly Into Multicomponent Hydrogen-Bonded Nanostructures

Hydrogen Bond Partner Reorganization in the Coadsorption of a Monodendron and Pyridylethynyl Derivatives

Hydrogen Bonding Directed Self-Assembly Of Small-Molecule Amphiphiles In Water

Hierarchical Self-Assembling of Dendritic–linear Diblock Complex Based on Hydrogen Bonding

Quadruply Hydrogen Bonded Dimers And Self-Assembly

Self-Assembled Multilayer Films Based on Dendrimers with Covalent Interlayer Linkage

Hydrogen Bonded Supramolecular Polymers in Both Apolar and Aqueous Media: Self-Assembly and Reversible Conversion of Vesicles and Gels

Multiple Hydrogen Bonding Induced Self-Assembly: Transformation from Nanofibrils to Nanosphere with Aromatic Oligoamide Incorporated Polyethylene Glycol

Supramolecular Polymer Chemistry: Design, Synthesis, Characterization, and Kinetics, Thermodynamics, and Fidelity of Formation of Self-Assembled Dendrimers

Ribbonlike Assembly of Molecules Composed of Fulleropyrrolidine and Pua Dendron

Self-assembly of hybrid dendrons into doubly segregated supramolecular polyhedral columns and vesicles.

Supramolecular polymer chemistry: self-assembling dendrimers using the DDA.AAD (GC-like) hydrogen bonding motif.

Synthesis and Self-Assembly of Dna-Aliphatic Polyether Dendron Hybrids

A Programmed Hydrogen Bonding Array Self-Assembles into a Polymeric Zipper-Like Architecture

Hydrogen-Bonding-Directed Layer-By-Layer Assembly Of Dendrimer And Poly(4-Vinylpyridine) And Micropore Formation By Post-Base Treatment