Abstract:With the rapid development of key industries such as new energy vehicles, smart homes, smart phones and consumer grade drones, the demand for high performance miniature micro- pressure sensors is also growing promptly. At prssent, most of the pressure sensors of this type adopt a C-type structure, and the thickness of the sensitive diaphragm needs to be continuously thinned in order to improve the sensitivity of this type sensor, which leads to its sensitivity to etching errors and makes it difficult to ensure the linearity of the pressure sensor. Based on this, we designed a miniature micro-pressure half active Wheatstone bridge piezoresistive pressure sensor with C-type square diaphragm structure, whose area is reduced by shortening the number of leads and pads, through ion impantation on the surface of the diaphragm to create a piezoresistors, using deep reactive ion etching (DRIE) technology to release the pressure sensitive diaphragm with length of 460 μm × 460 μm, thinkness of 7.5 μm. The buried oxygen layer in the SOI(silicon on insulator) can play a role of stopping the etching, which assures the uniformity of the released sensitive diaphragm and the non-linear errors of the sensor while maintains its sensitivity. In this paper, the influence of piezoresistor position offset on the performance of the pressure sensor is analyzed by means of simulation, which improves the accuracy of the designed model and guarantees its performance parameters can meet the design indicators. Finally, the static characteristics of the sensor is calibrated. The experimental results show that the sensitivity of the sensor is up to 0.538 mV kPa-1/3.5 V in the range of 40 kPa at room temperature, and the non-linear error is only 0.386 % FS. This study provides some new ideas and references for the design work of high performance micro-pressure sensors.

Design and Fabrication of a Novel Silicon Piezoresistive Pressure Microsensor for TPMS

A Novel Pressure Microsensor with 30- $\mu \Hbox{m}$-Thick Diaphragm and Meander-Shaped Piezoresistors Partially Distributed on High-Stress Bulk Silicon Region

Fabrication and Structural Design of Micro Pressure Sensors for Tire Pressure Measurement Systems (TPMS)

Design and Fabrication of Silicon Integrated Sensor Chip Used for TPMS

Design and fabrication of a tiny micro-pressure sensor with improved linearity and sensitivity

A Novel Combined Pressure/Temperature Microsensor

Design and Analysis of High-Performance and Small-Size Piezoresistive Pressure Sensors

Design and optimization of a micro piezoresistive pressure sensor

The Development of a New Piezoresistive Pressure Sensor for Low Pressures

Wide-Response-Range and High-Sensitivity Piezoresistive Sensors with Triple Periodic Minimal Surface (TPMS) Structures for Wearable Human-Computer Interaction Systems

The Design and Implementation of High Pressure Rectangular Diaphragm Sensor Based on Mems Technology

High-Performance Flexible Piezoresistive Pressure Sensor Printed with 3D Microstructures

A high pressure sensor with circular diaphragm based on MEMS technology

A Single-Side Micromachined MPa-Scale High-Temperature Pressure Sensor

Multiscale Hierarchical Design of a Flexible Piezoresistive Pressure Sensor with High Sensitivity and Wide Linearity Range.

Designing the Sensing Structure of a Certain Micro Piezoresistive Pressure Sensor

The Design and Optimization of a Highly Sensitive and Overload-Resistant Piezoresistive Pressure Sensor.

A novel pressure sensor design for low pressure ranges

Design and Research of Ultra-Miniature Pressure Sensors

A High Sensitive Pressure Sensor with the Novel Bossed Diaphragm Combined with Peninsula-Island Structure

Mechanical Structural Design of a Piezoresistive Pressure Sensor for Low-Pressure Measurement: A Computational Analysis by Increases in the Sensor Sensitivity