Abstract:The chemical and geotechnical properties of solidified/stabilized (s/s) municipal solid waste incineration (MSWI) fly ash are of prime importance for the design and operation of landfill sites. This study conducted field and laboratory tests to investigate aging effects on the chemical and geotechnical properties of s/s MSWI fly ash. Field investigations included borehole sampling and cone penetration tests (CPTs), and laboratory analyses included the measurement of the chemical, physical, hydrological, and mechanical properties of s/s fly ash with different fill ages. The results showed that: 1) Cl concentrations in landfill leachate were as high as 52,700 mg.L-1, which may present a technical challenge for leachate treatment; 2) specific gravity decreased with fill age, which was attributed to the leaching of metal elements from the s/s fly ash; 3) mean particle size decreased with fill age, resulting in an increase in the gravimetric moisture retention capacity (MRC) and a decrease in the saturated hydraulic conductivity; 4) gravimetric MRC was much higher than the initial moisture content, suggesting water absorption by s/s fly ash after landfilling; and 5) shear strength decreased with fill age, which was consistent with the CPTs results. To improve the design and operation of s/s MSWI fly ash landfill sites, the following suggestions are made: 1) the use of concentrated MSW landfill leachate in the s/s fly ash process should be avoided to reduce the concentrations of subsequent landfill leachate; 2) leachate generation could be further reduced by improving landfill operation practices and by taking advantage of the absorption capacity of s/s fly ash; and 3) the specific geotechnical parameters of s/s fly ash should be obtained prior to the design of landfill sites, and their aging effects should also be taken into consideration.

Experimental Study of Engineering Characteristics of Mixed Tailings Material

Chemical and Geotechnical Properties of Solidified/stabilized MSWI Fly Ash Disposed at a Landfill in China

Experimental Study On Physical And Mechanical Properties Of Iron Tailing Materials

MECHANICAL CHARACTERISTICS OF IRON MINE TAILING MATERIALS AND ANALYSIS ON DEFORMATION AND STABILITY OF TAILING DAM

Mechanical property and microstructure of cemented tailings backfill containing fly ash activated by calcium formate

Utilization of Mechanochemically Pretreated Municipal Solid Waste Incineration Fly Ash for Supplementary Cementitious Material

Mechanical Characteristics of Tailings in Different Depositional Zones: A Case Study of Caijiagou Tailings Pond in Shaanxi, China

Shearing resistance of tailing sand waste pollutants mixed with different contents of fly ash

Study on macro-meso mechanical properties of cemented tailings backfill with high fly ash content

Study on Mechanics Property Experiments of High Fly Ash Content Concrete

Effect of Iron Tailings and Slag Powders on Workability and Mechanical Properties of Concrete

Mechanical Properties and Hydration Mechanism of Iron Tailings–Cement-Based Supplementary Cementitious Materials

Use of Basalt Fiber-Reinforced Tailings for Improving the Stability of Tailings Dam

Experimental Study on the Utilization of Metallic Tailings As Cement Active Admixture

Optimization of Proportions of Alkali-Activated Slag–Fly Ash-Based Cemented Tailings Backfill and Its Strength Characteristics and Microstructure under Combined Action of Dry–Wet and Freeze–Thaw Cycles

Mechanical characteristics of copper mine tailings

Effect of polypropylene fiber and coarse aggregate on the ductility and fluidity of cemented tailings backfill

Test research on the effects of mechanochemically activated iron tailings on the compressive strength of concrete

Research on Mechanical and Carbonization Properties of Hybrid Fiber Iron Tailings Concrete Based on Deep Learning

Study on the Effect of Flocculation and Sedimentation on the Mechanical Properties of Iron Tailing Sand

Experimental Study on Mechanical Characteristics of Copper Tailing Materials with Sulfur Content