Abstract:This paper studies mechanical properties and energy damage evolution of fiber-reinforced cemented sulfur tailings (CSTB) backfill. The effects of fiber length and fiber content on the stress, toughness and failure properties of the CSTB were systematically revealed. In addition, the energy index evolution law was studied, and the energy damage evolution mechanism of CSTB was revealed. The results show that the deformation failure of fiber-reinforced CSTB mainly goes through four stages: initial crack compaction, linear elastic deformation, yield failure and post-peak failure. The peak stress and residual stress of the CSTB firstly increase and then decrease with the increase of fiber content and the addition of fiber can promote the change from brittle failure to ductile failure of the CSTB. Adding appropriate amount of fiber can improve the toughness of CSTB, and the influence degree of fiber length on the toughness index of CSTB is 6mm>12mm>3mm. The total strain energy increases linearly along the variation of fiber content, while the elastic strain energy and dissipated energy increase exponentially at the peak stress point. In the process of CSTB deformation and failure, "gentle—linear growth—slow growth—rapid decline" is for elastic strain energy, while "gentle—slow growth—rapid growth—linear growth" is for dissipation energy. The damage and failure of CSTB mainly experienced four stages: initial damage, slow growth of damage, accelerated damage and damage failure, and the damage evolution curve also showed the changing characteristics of "gentle—slow growth—rapid growth—linear growth". The CSTB without added fiber showed obvious "Y-type" and "linear-type" shear failure characteristics and the phenomenon of shear cracks penetrating the backfill appeared. No big shear crack occur when it is damaged, showing that the fiber addition restrain the crack growth and improve the overall crack resistance of the CSTB. Hydration products are obviously distributed on the surface of the fiber, which indicates that the fiber will be evenly dispersed in the CSTB and form a certain bonding force with the cement-tailings matrix, thus improving the overall mechanical properties of the CSTB.

Effect of polypropylene fiber and coarse aggregate on the ductility and fluidity of cemented tailings backfill

Effect of Fiber on Mechanical Properties of Cement Stabilized Macadam Mixture

Polypropylene Fiber's Effect on the Features of Combined Cement-Based Tailing Backfill: Micro- and Macroscopic Aspects

Experimental study on time-dependent rheological properties and mechanical performance of cemented fine tailings backfill mixed with polypropylene fiber

Reinforcement effect of polypropylene fiber on dynamic properties of cemented tailings backfill under SHPB impact loading

Enhancing the physical properties of cemented ultrafine tailings backfill (CUTB) with fiber and rice husk ash: Performance, mechanisms, and optimization

Microstructure evolution and mechanical behavior of foamed cement-based tail backfills under varying fiber types and concentrations

Study on macro-meso mechanical properties of cemented tailings backfill with high fly ash content

Influence of different fibers on compressive toughness and damage of early age cemented tailings backfill

Mechanical property and microstructure of cemented tailings backfill containing fly ash activated by calcium formate

Experimental study on influencing mechanism of the multiple effect of steel slag powder for coarse tailings cemented backfill

Study on the Rheological and Thixotropic Properties of Fiber-Reinforced Cemented Paste Backfill Containing Blast Furnace Slag

Mechanical properties and microstructure of coal cinder-based ultra-fine tailings cemented tailings body

Curing conditions effect on pore structure, compressive strength and elastic modulus of cementitious tailings backfills

Effect of calcium formate as an accelerator on dilatancy deformation, strength and microstructure of cemented tailings backfill

Additivity Effect on Properties of Cemented Ultra-Fine Tailings Backfill Containing Sodium Silicate and Calcium Chloride

Effects of cement content, polypropylene fiber length and dosage on fluidity and mechanical properties of fiber-toughened cemented aeolian sand backfill

Mechanical properties and energy damage evolution mechanism of fiber-reinforced cemented sulfur tailings backfill under uniaxial compression

Use of Basalt Fiber-Reinforced Tailings for Improving the Stability of Tailings Dam

Effect of polypropylene fiber on properties of modified magnesium-coal-based solid waste backfill materials

Study on Compressive Properties and Dynamic Characteristics of Polypropylene-Fiber-and-Cement-Modified Iron-Ore Tailing under Traffic Load