Abstract:A new type of sinusoidal flexure hinge is proposed in this article. The compliance and precision factors formulas of the hinge were derived based on the Euler–Bernoulli beam theory and the Gauss–Legendre quadrature formula. The natural frequency was also investigated based on the transfer matrix method. To design a flexure hinge with high precision and high natural frequency, the sinusoidal flexure hinge is proposed in this article. First, the formulae for the compliance and precision factors of the hinge were derived based on the Euler–Bernoulli beam theory and the Gauss–Legendre quadrature formula. The natural frequency was also investigated based on the transfer matrix method. Compared with the simulation results of ANSYS Workbench, the results show that the modeling error is less than 6.7%. Second, the influence of structural parameters on compliance, precision factor, compliance precision ratio, and natural frequency was analyzed. The results show that compliance and precision are often contradictory, and the minimum thickness significantly influences the hinge's performance. Compared with conic flexure hinges in terms of compliance, precision, compliance precision ratios, and natural frequency, the sinusoidal flexure hinges have a better comprehensive performance. Finally, a flexure hinge was manufactured, and compliance was measured. The experimental results show that the error between the experimental value and the modeling value is 7.8%. Both simulation and experimental results verify the effectiveness of the sinusoidal flexure hinge model.

Manufacture Error of Corner-filleted Flexure Hinge on the Performance of the Stiffness of Theoretical Modeling and Analysis

Finite Element Analysis of Displacement Performances of Flexure Hinge Mechanism Affected by Machining Errors

Design And Optimization Of Flexure Hinges

Influence of manufacturing errors on the stiffness of a uniaxial circular flexure hinge

Parametric Finite Element Analysis Of Output Displacement Affected By Machining Errors Of Flexure Hinge Mechanism

Design Methodology and Performance Analysis of Application-Oriented Flexure Hinges.

Error Analysis and Modeling of Monolithic Micromanipulator

Analysis on Displacement Performance Affected by Machining Errors of Single-Notch Right Circular Flexure Hinge

Theoretical, numerical, and experimental investigation on the compliance and natural frequency of sinusoidal flexure hinges

Some analytical problems of high performance flexure hinge and micro-motion stage design

Design and Analysis of Flexure Hinges by Means of Probability

Elliptical-arc-fillet flexure hinges: Toward a generalized model for commonly used flexure hinges

Research On Design Method Of Flexure Hinge

Accuracy Performances Of Asymmetrical Right Circular Flexure Hinge

Generalized Model and Configuration Design of Multiple-Axis Flexure Hinges

Design and analysis of the power-trigonometric function-shaped flexure hinges

STUDY ON THE TURNING-RIGIDITY CALCULATIONS OF SYMMETRICAL FLEXURE HINGE FOR CLAMPING MECHANISM AND ITS DESIGN PARAMETER CHOICE

Study on Design Method of One-Axis Flexure Hinge

Theoretical Modeling and Experimental Verification of Elliptical Hyperbolic Hybrid Flexure Hinges

Modeling and Analysis of Planar Symmetric Superelastic Flexure Hinges

Static and Dynamic Analysis of Flexure Hinge Mechanisms Using the Weak-Form Quadrature Element Method