Abstract:The paper is devoted to solving the problem of reducing the power consumption of programmable logic integrated circuits (hereinafter FPGAs) by software methods. The solution of this issue is especially relevant for various types of radio engineering systems, which include autonomous and portable stations. At the beginning of the paper, the theoretical foundations of FPGA consumption are given: types of consumption (static and dynamic) and influencing parameters (switching logic, the physical foundations of the integrated circuit and other internal resources). The work is explained and methodological guidelines are given for the specialized built-in PowerAnalyzer utility of the Quartus II software development environment, the main indicators with which the utility works are explained: toggle rate (switching frequency) and static probability (the probability of finding a signal in a stable state "0" or "1"). The following is a Pipelinning method for eliminating the racing effect (the effect in which signals passing through an element/crystal reach the destination point with different time delays). The essence of the method is that a register is set at the output of the element that creates the delay. The register stores the value at the input at the CLK clock frequency, so random switching of the previous circuit element will be ignored. This eliminates the effect of racing and reduces the dynamic consumption of the circuit. At the end of the paper, the results of reducing energy consumption using the above methods are presented. The greatest gain is observed when minimizing consumption, when a large number of logic elements on the FPGA chip are involved, as well as when high-frequency operation occurs. This is due to the fact that when using the methods of switching off the clock frequency, we get rid of a large number of switches between the states of logic elements (the higher the frequency, the more such state switches per unit of time). If the number of occupied elements is more than 50%, we get a reduction in power consumption of more than 5%, and if the number of occupied elements is 75%, then we get a gain of about 14%.

Low power optimization method in FPGA system

Research on low power technology based on Multi Bit Flip Flop

An Automatic Power Estimation Methodology for FPGA-Based Digital Signal Processing Systems

A Novel Power Estimation Framework for SRAM-based FPGAs

Study on the Low Power Cache Design Technique

Study on System-Level Power Model for Low Power Optimization

Ways to Reduce FPGA Power Supply by Software Methods

A FPGA prototype design emphasis on low power technique.

Effect of FPGA's routing architecture parameters on its power comsumption

A Survey on Low-Power Design of VLSI Circuits

A User-Configured Low Power Optimizing Mechanism on Embedded System

CP-FPGA: Energy-Efficient Nonvolatile FPGA with Offline/Online Checkpointing Optimization

Low Power Interconnects Design for General Switch Box Based FPGA

Research On Circuit-Level Design Of High Performance And Low Power Fpga Interconnect Circuits In 28nm Process

An Energy-Efficient Strategy for Microcontrollers

FPGA Energy Efficiency by Leveraging Thermal Margin

Power Optimization in Wireless Sensor Network Using VLSI Technique on FPGA Platform

Power Optimization Through Edge Reduction In Lut-Based Fpga Technology Mapping

A Low-Power Optimization Method for Memory and Its Application

Method for Systematic Power Consumption Modeling and Optimization of Pipeline ADC

The optimization design method of low power current-mode interconnect circuit based fast approach