Abstract:Although there are various methods to measure the modulation transfer function (MTF) of charge-coupled devices (CCD). the interferometric fringe pattern method has advantages over others, such as canted slit sources, bar targets, knife-edge, laser-speckle patterns, random noise pattern, etc. Our interferometric method is relatively simple and versatile: It requires no critical optics and no focusing or precision alignment, the entry array is tested, the contrast ratio of the test pattern is high enough, the spatial frequency of the fringe pattern can vary continuously. Our method generates the formation of a sinusoidal intensity fringe pattern by the interference of two monochromatic plane waves, and straightforward projects it onto the CCD array under test. The construction of the experimental device is based on the Fresnel Double-Mirror structure. A 2.5 mw He-Ne laser with the wavelength of 632.8 nm is used as the light source, the laser beam is spatially filtered by a 10 mu m pinhole and expanded to a diameter of 30 mm, and the resulting wave front is divided by two mirrors, which incline to each other at a small angle, and interfered. One of the mirrors is rotatable to vary the frequency of the pattern. The CCD array is mounted on a stage, which is also rotatable to make that the CCD array takes different angle with the fringe pattern direction, to receive the patterns. With the method we provided, the spatial frequency can be extended to some 2 times the Nyquist frequency of the CCD array to study the aliasing effect. In the Cartesian coordinates, the x- and y- axis MTFs (at angle 0 degrees and 90 degrees) of the CCD array were measured, the other three MTFs (at angle 26.56 degrees, 45 degrees and 63.44 degrees), which nobody has done before, were also tested offering a more comprehensive characterization of the CCD array.

Using multi-exposure of color fringes to measure the beating motion of a moth

Modulation transfer function measurement of charge-coupled devices using frequency-variable fringe patterns

Image Scanning Fluorescence Emission Difference Microscopy Based On A Detector Array

Threshold-optimized Dithering Technique for High-quality 3D Shape Measurement

Ccd High Speed Videography System With New Concepts And Techniques

Measurement of the Flapping Angle and Torsional Angle of a Dragonfly Wing Using Fringe Projection Method

Application Of High-Speed Photography With Rapidly Changing Color To A Cold Model Circulating Fluidized-Bed

High-Quality Three-Dimensional Shape Measurement Based on Binary Particle Swarm Dithering Optimization

Driving Techniques for High Frame Rate Ccd Camera

A Scanning Projected Line Method for Measuring a Beating Bumblebee Wing

Optical measurement on animals' locomotion

A New Projecting Moire Techenique Of Using Color: Encoded Fringes For Surface Shape And Deformation Measurement

High‐resolution Method for Measuring the Torsional Deformation of a Dragonfly Wing by Combining a Displacement Probe with an Acousto‐optic Deflector

Study of the Surface Structure of Butterfly Wings Using the Scanning Electron Microscopic Moiré Method.

Measuring the Flight Trajectory of a Free-Flying Moth on the Basis of Noise-Reduced 3D Point Cloud Time Series Data

Edge Enhancement for In-Phase Focal Modulation Microscope

A high-throughput multispectral imaging system for museum specimens

Extracting the Weak Distorted Fringes on the Dragonfly Wing by a Correlation Algorithm

Investigation of single-shot high-speed photography based on spatial frequency multiplexing

Moiré Fringe Method via Scanning Transmission Electron Microscopy

Divergent-Ray Projection Method for Measuring the Flapping Angle, Lag Angle, and Torsional Angle of A Bumblebee Wing