Abstract:Summary The pore size distribution of cigarette paper determines its air permeability and diffusion capacity and thereby has a significant influence on the gas exchange of a cigarette through the cigarette paper during smoking and during smouldering. For the design of cigarettes and in particular of cigarette papers it is important to understand how the pore size distribution of the cigarette paper is affected by the paper composition and paper properties and how it influences air permeability and diffusion capacity. It was the aim of this study to investigate how the composition of the cigarette paper such as filler content, fibre type and burn additive content qualitatively influenced the pore size distribution and how the pore size distribution and, in particular, which pore size range is correlated with air permeability and diffusion capacity, respectively. To this end eight naturally porous cigarette papers were selected which differed in air permeability, diffusion capacity, fibre type, filler content and burn additive content. The pore size distributions of these papers were measured by mercury porosimetry before and after the papers had been heated to 230 °C for 30 min. The pore size distributions were investigated for qualitative differences when air permeability, fibre type and filler content of the cigarette paper are modified. Furthermore by appropriate weighting of the pore size distributions optimal correlations between a weighted pore volume and air permeability or diffusion capacity were determined. The results show a good correlation with correlation coefficients greater than 0.9 for air permeability as well as for diffusion capacity. The results indicate that large pores are better correlated with changes in air permeability, while small pores are more strongly correlated with changes in diffusion capacity and support previous theoretical results obtained from flow and diffusion models. They also demonstrate the tight relationship between pore size distribution, air permeability and diffusion capacity, which makes the pore size distribution a tool to further optimize cigarette papers, for example, with respect to carbon monoxide yields in the smoke of a cigarette. [Beitr. Tabakforsch. Int 26 (2015) 312-319]

The Effect of Carbon Pore Structure on the Adsorption of Cigarette Smoke Vapour Phase Compounds

The Pore Size Distribution of Naturally Porous Cigarette Paper and its Relation to Permeability and Diffusion Capacity

Effects of Particle Size and Content of Calcium Carbonate on Micropore Structure of Cigarette Paper and CO Delivery in Mainstream Cigarette Smoke

Adsorption of Volatile Organic Compounds on Three Activated Carbon Samples: Effect of Pore Structure

Effect analysis of pore wall thickness, pore size, and functional group of activated carbon on adsorption behavior based on molecular simulation

A Systematic Improvement in Filtration Efficiency of Aldehydes in Mainstream Cigarette Smoke

Hierarchical Pore Structure of Activated Carbon Fabricated by CO2/microwave for Volatile Organic Compounds Adsorption

Adsorption and diffusion properties of tobacco composition and additive: a multiscale theoretical study

Revealing the journey of molecules and particles in heterogeneous, porous materials for cigarette filters

Effect of preparation methods of activated carbons on the cigarette smoke adsorption

Adsorbing 1, 3-Butadiene and Benzene by Porous Materials in Gas Stream and Cigarette Smoke

Effect of pore structure and surface chemical properties on adsorption properties of activated carbons

Synthesis of Si/O/C/N Quaternary Composite Aerogels with Micro/mesoporous Structures and Their Selective Adsorption Property for Volatile Carbonyl Compounds in Cigarette Smoke

Adsorption of Volatile Organic Compounds on Activated Carbon Fiber Prepared by Carbon Dioxide

Effect of Supports on the Catalytic Performance of Pd-Cu/Activated Carbon Catalyst for Eliminating CO in Cigarette Smoke

Molecular simulation of the effects of activated carbon structure on the adsorption performance for volatile organic compounds in fumes from gasoline

Adsorption of nicotine and tar from the mainstream smoke of cigarettes by oxidized carbon nanotubes

Molecular Simulation of Methane Adsorption in Activated Carbon: the Impact of Pore Structure and Surface Chemistry

Significant Removal of Harmful Compounds in Mainstream Cigarette Smoke Using Carbon Nanotubes Mixture Prepared by Catalytic Pyrolysis

Effect of Pore Structure of Activated Carbon on Performance of Activated Carbon Filter Paper

Pore structure effects on activated carbon adsorption behavior for toluene