Abstract:Background In order to investigate the correlation between the pore size distribution of biomass activated carbon adsorbents (BACAs) and VOCs (Volatile Organic Compounds) adsorption/desorption performance. four BACAs with same specific surface area but different pore size distribution were prepared under different experimental conditions and processes. Results The impact of the pore size distribution of BACAs on the adsorption/desorption performance of benzene, toluene and xylene was investigated. The results indicated that the adsorption ability of the prepared BACAs for benzene, toluene, and xylene was mostly affected by the pore size distributed in 2.60 ~ 3.25 nm, 2.68 ~ 3.35 nm and 4.20 ~ 4.90 nm, respectively, when the studied BACAs had similar specific surface area (SBET ≈ 1080 m2/g). However, the desorption amount of adsorbed benzene molecules mainly relies on the pore structure of the BACAs with the pore size distributed in 3.95 ~ 4.60 nm. Conclusion The pore structures of BACAs distributed in different pore size ranges have various effects on the phenyl VOCs adsorption capacity. Benzene adsorption on the BACAs were mainly affected by the microporous structures. The pore structure with larger pore size was more favorable for the desorption of the adsorbed toluene and xylene molecules compared to the adsorbed benzene molecules. Benzene, toluene, and xylene had low residual rates in the studied activated carbon adsorbents to show superior regenerative properties. This work could provide an important reference for the design, preparation, and selection of activated carbon adsorbents for the adsorption capacity of benzene, toluene, and xylene. This article is protected by copyright. All rights reserved.

Adsorption of Volatile Organic Compounds on Three Activated Carbon Samples: Effect of Pore Structure

Pore structure effects on activated carbon adsorption behavior for toluene

Effects of Properties of Three VOCs on Activated Carbon Adsorption

Effect analysis of pore wall thickness, pore size, and functional group of activated carbon on adsorption behavior based on molecular simulation

Hierarchical Pore Structure of Activated Carbon Fabricated by CO2/microwave for Volatile Organic Compounds Adsorption

Relationship Between Toluene Adsorption Capacity and Pore Structure of Activated Carbon

Study on Adsorption Capability of Activated Carbon for Organic Gases Using Micropore Filling Theory

Effects of activated carbon surface properties on the adsorption of volatile organic compounds.

Porous Carbon for Oxygenated and Aromatic VOCs Adsorption by Molecular Simulation and Experimental Study: Effect Pore Structure and Functional Groups

Adsorption of VOCs Onto Activated Carbons with Thermal Treatment

Role of Pore Structure of Activated Carbon in Adsorption for Acetone

Effects of activated carbon surface properties on the adsorption of VOCs

Designing Activated Carbon and Porous Carbon Nanofibers for Insight into Their Differences in Adsorption Affinity Mechanisms of VOCs

Effect of pore size distribution of biomass activated carbon adsorbents on the adsorption capacity

Effect of Functional Groups on VOCs Adsorption by Activated Carbon: DFT Study

Molecular simulation of the effects of activated carbon structure on the adsorption performance for volatile organic compounds in fumes from gasoline

Adsorption of Volatile Organic Compounds on Activated Carbon Fiber Prepared by Carbon Dioxide

Influence of pore volume and surface area on benzene adsorption capacity of activated carbons in indoor environments

Effect of pore structure and surface chemical properties on adsorption properties of activated carbons

Research on the Factors That Affect the Activated Carbon Adsorption on "Benzenes"

Influence of the Pore Structure and Surface Chemistry on Adsorption of Ethylbenzene and Xylene Isomers by KOH-activated Multi-Walled Carbon Nanotubes.