Abstract:In magnetorheological polishing (MRP), the abrasive grains are confined in a semi-fixed mode by the chain strings formed by the magnetorheological particles to achieve the polishing of workpiece surfaces. The force of the abrasive particles on the workpiece comes from the force of the magnetic chain strings acting on the abrasives. However, the angular surface of the abrasive is generally smooth, resulting in a limited holding force on the abrasive by the magnetic chain strings. Therefore, the polishing force of the abrasives on the workpiece is small, and it is easy to slip and escape from the polishing area. In this paper, the sintering method is used to prepare polymerized diamond abrasive(PD) with microstructures on the surface, to increase the surface area of the abrasive and to improve the control force of the magnetic chain string on the abrasive. The prepared PD has a particle size of about 25.7 μm, with a rough surface and a large amount of 3 μm single-crystal diamond particles exposed. The MRP results show that the PD have more surface micro-cutting edges and stronger machinability than the commonly used single-crystal diamond abrasives(SCD). The material removal rate(MRR) of PD on silicon wafers and sapphire wafers was increased by 173.3 % and 122.2 %, respectively. The morphological changes of the PD were traced by scanning electron microscope(SEM), and it was found that: when polishing low-hardness materials, the wear of the PD was in the form of ceramic bond wear and diamond grit dislodgement; and when polishing high-hardness materials, the wear of the PD was in the form of ceramic bond breakage and PD fragmentation. When abrasive grit dislodgment occurs on the surface of the PD, the formed hole enhances the force between the PD and the magnetic chain strings. Which further enhances the holding force of the magnetic chain string on the PD, and can effectively improve the magnetorheological polishing efficiency.

Research on Polishing KDP Crystals with MRF

Research of polishing process to control the iron contamination on the magnetorheological finished KDP crystal surface

Incined Magnetorheological Finishing and Its Path Controlling

Preliminary Study of Disc Hydrodynamic Polishing

The Magnetorheological Finishing (MRF) of Potassium Dihydrogen Phosphate (KDP) Crystal with Fe3O4 Nanoparticles

Novel Abrasive-Free Jet Polishing Mechanism for Potassium Dihydrogen Phosphate (KDP) Crystal

Nano-Precision Synergistic Finishing Process Integrated ELID-Grinding and MRF

Effect of Wetting Characteristics of Polishing Fluid on the Quality of Water-Dissolution Polishing of KDP Crystals

Magnetization and self-sharpening mechanism of polymerized diamond abrasive based on magnetorheological polishing technology

Magnetic Bingham Fluid-Assisted Deterministic Polishing for Super-Smooth Surfaces

Anhydros-based shear-thickening ultra-precision polishing of KDP crystal

Magnetorheological Finishing Technology for Polishing Super-Smooth Optical Surfaces

An Investigation on the Material Removal Mechanism of Abrasive-Free Jet Polishing for KDP Crystal

Study on the rheological and polishing properties of electromagnetic two-phase composite particles with abrasive characteristics

Analyzing and Improving Surface Texture by Dual-Rotation Magnetorheological Finishing

Development and Feature Investigation of Oil-Base Magnetorheological Fluid

Effect of femtosecond laser modification on magnetorheological finishing of magnesium aluminate spinel

Perpendicular Axis Magnetorheological Finishing of Spherical Optics

Theoretical Modeling and Analysis of Material Removal Characteristics for KDP Crystal in Abrasive-Free Jet Processing.

Study on magnetorheological nano-polishing using low-frequency alternating magnetic field

Optimizing Parameters for Magnetorheological Finishing Supersmooth Surface