Abstract:Purpose - This paper aims to provide a 3D finite element (FE) model for dynamic simulation of cutterhead and soil interaction in slurry shield tunneling. Design/methodology/approach - Dynamic numerical simulation of excavation process is realized by combined use of submodeling method and arbitrary Lagrangian Eulerian (ALF) approach. The model size reduction, soil mesh refinement and stress state initialization are fulfilled by submodeling. The large soil deformations, failures and flows are handled by ALE approach. Computation time is reduced by parallel domain decomposition with recursive coordinate bisection method. Validation of the proposed approach is achieved by comparing the numerical results with monitored data from the model test for Yangtze River tunneling project. Findings - The proposed approach proves to be an effective technique to simulate the cutterhead and soil interaction dynamically in tunnel excavation. Comparative study on the effect of mesh density indicates the requirement of relative mesh refinement. Exploration of the parallel computing performance points out the best decomposed domain for the simulation. Parametric study on the effect of rotary speed and investigation on soil properties presents the significant factors for torque. Practical implications - The proposed numerical model can help in the development process of reduced-scale model test, as well as design and selection of slurry shield machines. Originality/value - The originality comes from the need to evaluate the excavation performance of slurry shield machine in tunneling project. This contribution provides a 3D numerical approach, which takes into account the stress state in soil and dynamic contact effects between soil and cutterhead. In this work, large deformation in soil is handled. Besides, soil failures and flows are captured.

Cutting Force Calculation of the Cutter Suction Dredger Based on 2-D Soil-cutting theory

ANALYSIS OF GROUND SURFACE DISPLACEMENT AND HORIZONTAL MOVEMENT OF DEEP SOILS INDUCED BY SHIELD ADVANCING

Introduction to Software for Calculation of External Forces on Cutter Suction Dredgers and Their Application

Numerical simulation of cutterhead and soil interaction in slurry shield tunneling

Determination of the Cutterhead Torque for EPB Shield Tunneling Machine

Development of a Real-Time Monitoring and Calculation Method for TBM Disc-Cutter's Cutting Force in Complex Ground

A New Calculation Model of Cutterhead Torque and Investigation of Its Influencing Factors

RESEARCH ON SOIL DEFORMATION DURING SHIELD CONSTRUCTION PROCESS

Torque Calculation Model of Cutting Head in Shield Machine and Experimental Study

3 D Numerical Analysis on the Behavior of Excavation

Calculation for Spud-lifting Force of Cutter Suction Dredger

Dynamic Load Analysis of the Super Cutter Suction Dredger Cutter based on Rock Cutting Theory

Analysis and Calculation of Superimposed Load Induced by Double Parallel Shield Tunnelling

Study on Design Theory and Method of Geology Adaptability for Earth Pressure Balanced Shield Tunneling Machine

A Numerical Calculation of Resistance of an Inland Large Self-propulsion Cutter Suction Dredger in Shallow Water

Study on 3-D Numerical Simulation for Soil Cutting with Large Deformation

Numerical calculation and analysis of the flow field caused by a jetting trencher

Study on calculation methods of ground deformation induced by pipe jacking construction

Study on Calculating Methods of Soil Vertical Deformation Induced by Pipe Jacking Construction

Investigating the cutting force of disc cutter in multi-cutter rotary cutting of sandstone: Simulations and experiments

Environment Load and Its Effects on Capability of Cutter Suction Dredger