Abstract:At present, the degree of industrialization in China is deepening, and various types of production equipment appear. However, during the startup and operation of mechanical equipment, fracture and wear will occur due to various factors. Therefore, once the mechanical equipment fails, it must be diagnosed as soon as possible to avoid serious economic losses and casualties. Rotating machinery is an important power device, so it is necessary to regularly detect and monitor equipment signals to avoid the consequences of wrong control methods. In this study, the fault diagnosis of rotating machine based on adaptive vibration signal processing is studied under the safe environmental conditions. The fault diagnosis process of rotating machinery is to first collect vibration signals, then process signal noise reduction, and then extract fault characteristic signals to further identify and classify fault status and diagnose fault degree. This study briefly introduces several rotating machinery vibration signal processing methods and identifies the fault state of the rotating machine based on the high-order cumulant. By building a DDS fault diagnosis test bench, the chaotic particle swarm parameter optimization algorithm is used to calculate the accurate stochastic resonance parameters. After noise processing, the high-frequency part is significantly reduced. The results show that, after stochastic resonance wavelet decomposition and denoising processing, the number of intrinsic functions can be significantly reduced, the fault frequency can be increased, the high-frequency noise can be reduced, and the fault analysis accuracy can be improved. We identify the fault state of rotating machinery based on the high-order cumulant, train the four states of the bearing, and compare the four types of faults, no fault, inner ring fault, rolling element fault, and outer ring fault through the comparison of the actual test set and the predicted test set. It is concluded that the rotating machinery fault belongs to the rolling element fault and the identification accuracy rate is 95%. Finally, based on the LMD morphological filtering, the rotating machinery fault diagnosis is carried out, and the feature extraction is carried out based on the LMD algorithm to decompose the bearing fault signal. Finally, the result after the morphological filtering and LMD decomposition and extraction can avoid noise interference.

An Abnormal Vibration Analysis & Diagnosis of Some PTA Device

Development and Application of Steam Turbine Vibration Sensor Fault Diagnosis and Calibration Instrument

Fault Diagnosis Based on Multi-channel Vibration Signal for Port Machine Trolley Wheel Bearings

Vibration Analysis for Fault Detection of Wind Turbine Drivetrains-A Comprehensive Investigation

Signal Acquisition and Analysis of Shaft Unbalance Vibration Test

A vibration analysis method based on hybrid techniques and its application to rotating machinery

A Wireless Vibration Sensor System Based on Shaft Synchronous Measurement for Gear Fault Diagnosis

STUDY ON METHODS OF VIBRATION FAULT DIAGNOSIS BASED ON TIME-FREQUENCE CONTOUR MAP FOR TURBINE GENERATOR UNIT

Bearing fault diagnosis based on harmonic matching compensation and keyless phase order tracking

Fault diagnosis analysis of aeroengine test vibration

The Vibration and Dynamic Balancing at Site of Homemade 60Hz Steam Turbine Set

Investigation on the subsynchronous pseudo-vibration of rotating machinery

Application of Three-dimensional Holographic Spectrums in the Diagnosis of a Load-induced Rotor Thermal Bending and Elevation Fault

Diagnosis and Treatment of Turbo-generator Unit Abrupt Vibration Fault in a Power Plant

Vibration Analysis and Diagnosis on the Centrifugal Pump Gear Box

Application of Matching Pursuit in Fault Diagnosis of Gear

Network-based System of Mechanical Vibration Fault Diagnosis

Investigation on Axial Displacement Fault Mechanism Based on Dynamic Characteristic Coefficients Identification of Tilting-Pad Thrust Bearing

An Approach to Performance Assessment and Fault Diagnosis for Rotating Machinery Equipment.

Rotating Machinery Fault Diagnosis Based on Adaptive Vibration Signal Processing under Safety Environment Conditions

Design of fault diagnosis system of wind turbine