Abstract:Diesel soot is a significant contributor to air pollution. Soot particles present in diesel engine exhaust have a negative impact on the environment and human health. Diesel oxidation catalysts (DOCs) and diesel particulate filters (DPFs) currently use noble metal-based catalysts for soot oxidation. Due to the use of noble metals in the catalyst, the cost of diesel after-treatment systems is steadily rising. As a result, diesel vehicles have become commercially less viable than gasoline vehicles and electronic vehicles. The study focuses on an alternative diesel oxidation catalyst with efficiency similar to that of a noble metal catalyst but with a much lower cost. CeO2-Al2O3 catalysts are known for their oxygen storage capacity and high redox activity, making them suitable for soot oxidation. Adding Zr to these catalysts has been shown to influence their structural and chemical properties, significantly affecting their catalytic behavior. Therefore, the current study is focused on using Zr/CeO2-Al2O3 as a substitute for noble metal-based catalysts to enhance its performance for diesel soot oxidation in automotive exhaust. Evaporation-induced self-assembly (EISA) was used to prepare 1, 3, and 5 weight (wt) % Zr supported mesoporous CeO2-Al2O3 catalysts. Morphological, structural, and physicochemical properties of the synthesized catalysts were examined using Brunauer-Emmett-Teller (BET) absolute isotherm, Scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Temperature programmed reduction (TPR), and Temperature-programmed desorption of ammonia (NH3-TPD). XRD, BET, and SEM data confirmed that the catalysts were mesoporous and low-crystalline with a high surface area. The soot oxidation activity of the catalysts was evaluated using a thermogravimetric analysis (TGA) technique. The loose contacts soot oxidation activity test suggested that 50% oxidation of soot occurred at 390 °C in the absence of a catalyst. T50 of CeO2-Al2O3 catalyzed soot oxidation was 296 °C. Adding Zr to the catalyst significantly improved catalytic activity for diesel soot oxidation. We observed a further drastic change in T50 of soot over 1, 3, and 5% Zr/CeO2-Al2O3, which were 220 °C, 210 °C, and 193 °C, respectively. According to these results, incorporating Zr into the CeO2-Al2O3 catalyst significantly improved the oxidation process of soot.

Studies of Al2O3–K Catalysts Prepared Using Various Precursors for Diesel Soot Elimination

Investigation of the Physicochemical Properties of Soot Subjected to Non-Catalytic and CeO2-catalytic Aging under Sequential Aerobic and Anaerobic Exhaust-Like Conditions Simulating the Transition from Engine Operation to Cessation

Preparation, Characterization and Catalytic Activity Studies of CeO2–K Diesel Soot Oxidation Catalysts Loaded on Porous Al2O3 Substrate Using Water-Immiscible Solvent

Preparation, Characterization, Catalytic Activity and CO2 Absorption/desorption Studies of Ln/K (ln=la, Sm, Y) Catalysts for Diesel Soot Elimination

The effects of potassium halides on catalytic activities of CeO2–K based catalysts for diesel soot oxidation

The CO2 absorption characteristics and catalytic oxidation activities of V/K and V/Ce/K-based catalysts for diesel soot oxidation

The Catalytic Activities and Thermal Stabilities of Li/Na/K Carbonates for Diesel Soot Oxidation

Role of CeO2–ZrO2 in Diesel Soot Oxidation and Thermal Stability of Potassium Catalyst

Preparation, Structure and Soot Oxidation Performance of Nano-scaled Perovskite-type La1-xKxCoO3 Catalyst

Research on K-V-rare Earth Metal Catalysts for Diesel Soot Oxidation

Insight into high-performance of La–Ce–MnOx oxides with different calcination temperatures for diesel soot combustion

Preparation of Cordierite Monolith Catalysts with the Coating of K-Modified Spinel MnCo2O4 Oxide and Their Catalytic Performances for Soot Combustion

Pt/Zeolite Catalysts for Soot Oxidation: Influence of Hydrothermal Aging

Promoting Soot Combustion Efficiency by Strengthening the Adsorption of NOx on the 3DOM Mullite Catalyst

Preparation of MnOx–CeO2–Al2O3 Mixed Oxides for NOx-assisted Soot Oxidation: Activity, Structure and Thermal Stability

Diesel soot oxidation over potassium-promoted urchin-structured NiO-NiCo2O4 catalyst

Catalytic evaluation of promoted CeO2-ZrO2 by transition, alkali, and alkaline-earth metal oxides for diesel soot oxidation

Catalytic performance of Ag/Al2O3-C2H5OH-Cu/Al2O3 system for the removal of NOx from diesel engine exhaust.

Alkali/alkaline-earth metal-modified MnO supported on three-dimensionally ordered macroporous–mesoporous Ti Si1-O2 catalysts: Preparation and catalytic performance for soot combustion

Preparation of Ag/ Al2O3 Selective Catalytic Reduction Monolithic Catalyst

Catalytic activity of Zr/CeO2-Al2O3 catalyst for diesel soot oxidation: synthesis, characterization, and performance evaluation