Abstract:This paper presents an investigation of cold start by the method of single-cycle and multi-cycle combustion analysis in a LPG EFI engine based on cycle-by-cycle control strategy. Experiments were carried out in a four-stroke, water-cooled, single cylinder, 125 mL SI engine with EFI system. Effects of the first injection pulse width and the first firing cycle on the characteristics of cold start were analyzed based on the histories of transient engine speeds and cylinder pressures. The study focuses on how to realize the controllable ignition cycle, and the single-cycle and multi-cycle combustion were tested based on the single starting injection pulse width. Test results showed that: the first firing cycle has an important effect on HC emission and combustion stability during cold-start. The injection pulse width is the key factor for the characteristics of ignition cycle during the cold start. It is possible to realize the ideal ignition cycle, such as injection on time, combustion on time if the first injection pulse width and timing are controlled reasonably. The air fuel ratio of the starting mixture needed by first firing cycle is 2.2 times of that at normal idle condition. When the single starting injection pulse width is applied during cold start, the HC emission is lower than that of multi-cycle starting injection pulse width, and the starting reliability is also better. The first firing cycle can be advanced and the cold starting reliability can be improved when the engine is motored by starter several cycles before the first injection.

A Study on Transient Emission Behavior at Cold Start of Spark Ignition Engines

Study of Real Time NO Emission Characteristics Based on First Firing Cycle Analysis of Cold-Start

Characteristics of Combustion and Emissions During Engine Transient Quick Cranking Start Based on Cycle-by-Cycle Analysis

The Study of the Control on the First Firing Cycle for Reducing the Cold Start Emissions in a Liquid Petrol Gas Spark Ignition Engine

Transient Combustion and Hydrocarbon Emissions from a Hybrid Electric Vehicle Engine under High-Speed Rapid Start Conditions

Experimental Study on Cold Start Characteristics of Gasoline Engine and LPG Engine

Analysis of HC Emissions during Cold-start of SI Engines

Research of the Effect of Piston Crevice on Transient HC Emission at Cold Start on SI Engine

Transient HC Emissions and Fuel Transport in the Intake Port of the First Firing Cycle During Cold Start

A Study on Cold Start Emission Characteristics of Gasoline Vehicle Based on Engine Test Bench Simulation

Effect of Piston Crevice on Transient HC Emissions of First Firing Cycle at Cold Start on LPG SI Engine

Study on formation process of in-cylinder unburned hydrocarbons during cold start and idling periods in spark ignition engines

Experimental Study on Steady and Transient HC Emissions for HCCI Diesel Engine

Starting Control Strategy and Experimental Study of CNG Engine

An Experimental Study on the Measures for Improving Cold Start/Warm-up Process of Engine

Cold Start Characteristics at Low Temperatures Based on the First Firing Cycle in an LPG Engine

Design of Transient Measurement and Control System of Diesel Engines During Start Process

A Study on the Effect of Secondary Air Injection on the Cold Start Emission of Gasoline Engine

Experimental Study and Analysis of Combustion Noise in DI-Diesel Engine under Transient Conditions

Research on Real Time NO Emission Characteristics During Cold Start in an Electronic Control LPG Motorcycle Engine

Investigation of Cold-Start Based on Cycle-by-Cycle Control Strategy in a LPG EFI Engine