Abstract:A new design method—Matched and equipartitioned (EP) design method—has been proposed for radio frequency quadrupole (RFQ) dynamics design, on the considerations of preventing emittance growth and halo formation in high-intensity linacs by means of keeping beam envelope matched and energy balance within the beam, as well as avoiding structure resonances [R.A. Jameson, IEEE Trans. Nucl. Sci. NS-28 (1981) 2408; R.A. Jameson et al., Scaling and optimization in high-intensity linear accelerators, LA-CP-91-272, Los Alamos National Laboratory, July 1991 (introduction of LINACS design code); R.A. Jameson, AIP Conf. Proc. 279 (1992) 969; R.A. Jameson, An approach to fundamental study of beam loss minimization, in: Y.K. Batygin (Ed.), AIP Conference Proceedings, vol. 480, Space Charge Dominated Beam Physics for Heavy Ion Fusion, Saitama, Japan, December 1998]. As there are more than three parameters for a linear accelerator, but only three equations (two envelope equations and an EP equation) are available to design the structural parameters of the RFQ accelerator around the beam, therefore the others have to be determined by additional rules. Following these equations and rules, a new RFQ design code named MATCHDESIGN has been written at Peking University. Three example designs are generated by this code and their simulation results have been compared with a conventional RFQ, which had proved the feasibilities and merits of the new method.

Matched and Equipartitioned Design Method for Modern High-Intensity Radio Frequency Quadrupole Accelerators

Matched and equipartitioned method for high-intensity rfq accelerators

Matching Design Method For High Intensity Rfq Accelerators

PROGRAM FOR HIGH-INTENSITY RFQ DESIGN WITH MATCHED AND EQUIPARTITIONED DESIGN STRATEGY

The Beam Mismatches in the RFQ Dynamics Design

Design approach for modern high-current, radio-frequency quadrupole accelerators with low emittance transfer

Beam Dynamics Design of a 50 Ma D+ RFQ

The Design of a High-Intensity Deuteron Radio Frequency Quadrupole Accelerator

Physical design of a compact 2 MeV deuteron radio-frequency quadrupole

Separated Function Rfq Beam Dynamics Design and Commissioning

Beam dynamics design and irradiation experiment of beam loss for a CW 100-mA proton RFQ

Design of a CW high charge state heavy ion RFQ for SSC-LINAC

Physical Design and Multi-Physics Analysis of a 200 MHz Continuous Wave Radio Frequency Quadrupole Accelerator for a Proton Accelerator Facility

Beam-dynamics Design of a 2 MeV/u Heavy-Ion IH-DTL with Electromagnetic Quadrupole Structure

Beam Dynamics Design of HIAF RFQ

BEAM DYNAMICS DESIGN AND ERROR STUDY OF THE 5mev RFQ

Design of an 81.25 Mhz Continuous-Wave Radio-Frequency Quadrupole Accelerator for Low Energy Accelerator Facility

Fast-bunching Design of Compact Heavy Ion RFQ Linac

Novel deuteron RFQ design with trapezoidal electrodes and double dipole four-vane structure

Design of a compact RFQ linac for the transportable neutron source

Realizing long radio-frequency quadrupole accelerators with multiple shorter and independent cavities