Abstract:A new approach for a compact radio-frequency (RF) accelerator structure is presented. The new accelerator architecture is based on the Multiple Electrostatic Quadrupole Array Linear Accelerator (MEQALAC) structure that was first developed in the 1980s. The MEQALAC utilized RF resonators producing the accelerating fields and providing for higher beam currents through parallel beamlets focused using arrays of electrostatic quadrupoles (ESQs). While the early work obtained ESQs with lateral dimensions on the order of a few centimeters, using printed circuits board (PCB), we reduce the characteristic dimension to the millimeter regime, while massively scaling up the potential number of parallel beamlets. Using Microelectromechanical systems scalable fabrication approaches, we are working on further reducing the characteristic dimension to the sub-millimeter regime. The technology is based on RF-acceleration components and ESQs implemented in PCB or silicon wafers where each beamlet passes through beam apertures in the wafer. The complete accelerator is then assembled by stacking these wafers. This approach has the potential for fast and inexpensive batch fabrication of the components and flexibility in system design for application specific beam energies and currents. For prototyping the accelerator architecture, the components have been fabricated using PCB. In this paper, we present proof of concept results of the principal components using PCB: RF acceleration and ESQ focusing. Ongoing developments on implementing components in silicon and scaling of the accelerator technology to high currents and beam energies are discussed.

Realizing long radio-frequency quadrupole accelerators with multiple shorter and independent cavities

Design approach for modern high-current, radio-frequency quadrupole accelerators with low emittance transfer

Study of Separated Function Radio Frequency Quadrupoles Accelerator

Design and Cold Measurements of a Coupled RFQ-SFRFQ Cavity

Physical Design and Multi-Physics Analysis of a 200 MHz Continuous Wave Radio Frequency Quadrupole Accelerator for a Proton Accelerator Facility

The Design of a High-Intensity Deuteron Radio Frequency Quadrupole Accelerator

Design and Measurements of SFRFQ Cavity

Fabrication and cold test of prototype of spatially periodic radio frequency quadrupole focusing linac

rf and thermal design studies of a 704.4 MHz, , continuous-wave rf quadrupole accelerator for frequency jump

Physical design of a compact 2 MeV deuteron radio-frequency quadrupole

Design of a 162.5 MHz Superconducting Radio-Frequency Quadrupole for High-Intensity Proton Acceleration

A compact linear accelerator based on a scalable microelectromechanical-system RF-structure

THE STUDY OF SEPARATED FUNCTION RFQ (SFRFQ) WITH DIAPHRAGMS

Design of a CW BISOL RFQ for Three Kinds of High-Charge-State Ions Simultaneous Acceleration

SFRFQ with Diaphragms Linac Structure

CW RFQ design and investigation for multi-charge-state acceleration of radioactive beams from BISOL

Simulation Study on 104 MHz Radio Frequency Quadrupole Accelerator

Design of an 81.25 Mhz Continuous-Wave Radio-Frequency Quadrupole Accelerator for Low Energy Accelerator Facility

Design and Cold Model Experiment of a Continuous-Wave Deuteron Radio-Frequency Quadrupole

Coaxial multi-mode cavities for fundamental SRF research in an unprecedented parameter space

Separated Function Rfq Beam Dynamics Design and Commissioning