Abstract:This study details the promoting effects that SO(4)(2-)has on a NiMo/gamma-Al(2)O(3)catalyst prepared using NiSO4(CAT-Sulf) as a nickel precursor, compared with the Ni(NO3)(2)(CAT-Nit) and the industrial NiMoP-complex (CAT-NiP) after 600 degrees C calcination. The three catalysts were characterized by virtue of X-ray diffraction (XRD), thermogravimetry mass spectrometry (TG-MS), N(2)adsorption-desorption, hydrogen temperature programmed reduction (H-2-TPR), X-ray photoelectron spectroscopy (XPS) and high-resolution transmission electron microscopy (HRTEM). Hydrodesulfurization (HDS) activity was assessed using dibenzothiophene (DBT) as the feedstock. On the one hand, compared with CAT-Nit, the SO(4)(2-)anions could be anchored on the catalyst surface due to their thermal stability and strong interaction with Al2O3, while few NO(3)(-)anions could be found. These anchored SO(4)(2-)anions weaken the metal-support interaction and hinder the formation of NiAl2O4, thereby facilitating both the sulfidation of Mo species and the decoration of Ni atoms and generating more Ni-Mo-S active sites. On the other hand, compared with CAT-NiP, the residual SO(4)(2-)anions do not impair the support properties and CAT-Sulf maintains excellent textural structure,i.e.high specific surface area and a proper pore structure. Therefore, CAT-Sulf exhibits the highest dibenzothiophene hydrodesulfurization (DBT-HDS) activity out of the three catalysts. Moreover, these anchored SO(4)(2-)anions effectively hinder the aggregation and growth of the active phases, thus guaranteeing a catalyst with high metal dispersion and good stability. Finally, using the inferior residual oil as a feedstock, the stability of CAT-Sulf was also assessed compared with an industrial catalyst (CAT-Ref), and the results show that during 1500 h on stream, its HDS ratio is maintained at around 78%, while that of the industrial catalyst (CAT-Ref) declined fromca.82% toca.71% after 1200 h, indicating that CAT-Sulf exhibits much better stability and shows excellent industrial potential. The anchored SO(4)(2-)anions simultaneously endow the NiSO4-derived catalyst with excellent physical structure, high intrinsic activity and good stability, indicating that it might be a simple and effective method to balance the activity and stability of the HDS catalyst using thermostable nickel precursor salts.

Preparation and Hydrodesulfurization Catalytic Performance of Ni2P/SiO2/Cordierite Monolithic Catalysts

Synthesis of Novel NiMo Catalysts Supported on Highly Ordered TiO2-Al2O3 Composites and Their Superior Catalytic Performance for 4,6-Dimethyldibenzothiophene Hydrodesulfurization

Hierarchical TS-1 zeolite loaded with NiMo catalysts: Preparation and performance in hydrodesulfurization

Role of the Solvent Evaporating Temperature on the NiMo/TiO2-Al2O3 Catalyst and the Hydrodesulfurization Performance for 4,6-Dimenthyldibenzothiophehe

In Situ Synthesis of Nb-modified AFI Topology Molecular Sieve and Its Modulation on the Formantion of High-Efficiency Catalyst for 4,6-Dimethyldibenzothiophene Hydrodesulfurization

4,6-Dimethyldibenzothiophene Hydrodesulfurization on Nickel-Modified USY-Supported NiMoS Catalysts: Effects of Modification Method

Synthesis of High-Dispersed NiCoP/SiO2 and Hydrodesulfurization Performance

A New Route for Synthesizing Nickel Phosphide Catalysts with High Hydrodesulfurization Activity Based on Sodium Dihydrogenphosphite

Highly active Ni 2 P/SiO 2 catalysts phosphorized by triphenylphosphine in liquid phase for the hydrotreating reactions

Synthesis of Supported Bimetal Phosphide Catalysts Based on Red Phosphor and Hydrodesulfurization Property

A highly loaded and dispersed Ni2P/SiO2 catalyst for the hydrotreating reactions

Mesoporous Carbon Supported Nickel Phosphide Catalysts Prepared by Solid Phase Reaction

Effect of Supports on the Supported Ni2P Catalysts Prepared by the Phosphidation Using Triphenylphosphine in Liquid Phase

A New Preparation Approach for NiCoP/SiO2 Catalyst by Solid Phase Reaction of Nickel and Cobalt Cations with Potassium Dihydrogen Phosphate

A Novel Route for Synthesis of NiCoP/SiO2 Hydrodesulfurization Catalysts with Active S Species

Efficient Ni2P /Al2O3 hydrodesulfurization catalysts from surface hybridization of Al2O3 particles with graphite-like carbon

Promoting effects of SO(4)(2-)on a NiMo/gamma-Al(2)O(3)hydrodesulfurization catalyst

Performance of Ni-rich bimetallic phosphides on simultaneous quinoline hydrodenitrogenation and dibenzothiophene hydrodesulfurization

Preparation of Ni2P with a Surface Nickel Phosphosulfide Layer by Reduction of Mixtures of Na4P2S6 and NiCl2

Promoting effects of SO42− on a NiMo/γ-Al2O3 hydrodesulfurization catalyst

Preparation of novel mesoporous Ce-Ni2P/SBA-15 catalysts and their catalytic performance for hydrodesulfurization of dibenzothiophene