Abstract:Drying is one energy-intensive process in the industry. Heat pump system for drying process by employing carbon dioxide/low-global warming potential working fluid mixture is proposed and compared with traditional boiler drying systems. A life cycle thermodynamic and environmental evaluation model is developed to assess the energy consumption, gaseous and particulate matter emissions saving potential by using the new heat pump drying solutions. With the help of carbon dioxide/low-global warming potential working fluid mixtures, the coefficient of performance of heat pump dryer is obviously enhanced and the discharge pressure is reduced. The highest coefficient of performance of 4.29 is achieved by using carbon dioxide/R32 under the mass fraction of 0.1/0.9, which is increased by 7.42% in contrast to pure carbon dioxide. The specific moisture extraction rate is improved and the primary energy consumption throughout the lifetime is dramatically reduced. The life cycle climate performance is also reduced and the equivalent carbon dioxide emissions from energy consumption are the dominant category. Carbon dioxide-based mixture heat pump dryer can also reduce the pollutant emissions. Compared with natural gas-fired boiler system, oxynitride emissions are decreased by 81.66%, and particulate matter emissions are less than a quarter of the electric boiler. Carbon dioxide/low-global warming potential working fluid mixtures with low or medium-temperature glide, and high-temperature glide carbon dioxide/low-global warming potential working fluid mixtures with extremely low (~0.1) or very high (~0.9) carbon dioxide mass concentrations are recommended. The heat pump dryer charged with carbon dioxide/low-global warming potential working fluid mixtures is a promising solution to substitute traditional boilers for energy-saving and environmentally-friendly industrial drying.

Analysis on structure and characteristics of vapor-compression heat pump dryer

Analysis and optimization study of closed heat pump drying machine

Process simulation and analysis of a closed-loop heat pump clothes dryer

Study of a Novel Heat Pump Dryer and Drying Experiment

Vapor compression multifunctional heat pumps in China: A review of configurations and operational modes

Simulation and analysis of a new cabinet heat pump clothes dryer

Experimental Investigation on a Solar Assisted Heat Pump In-Store Drying System

Performance analysis of a heat pump dryer with separate heat recovery using an energy, exergy, and economic methodology

COMPARISON ON PERFORMANCES OF CASCADE HEAT PUMP AND TWO-STAGE COMPRESSION HEAT PUMP FOR FREEZE-DRYER

Analysis on Energy Conservation of a New Type Hot- Air Drying System

Optimization on Performances of Heat Pump for Freeze-Dryer

A Novel Absorption-Based Enclosed Heat Pump Dryer with Combining Liquid Desiccant Dehumidification and Mechanical Vapor Recompression: Case Study and Performance Evaluation

The Improvement on Efficiency and Drying Performance of a Domestic Venting Tumble Clothes Dryer by Using a Heat Pipe Heat Recovery Heat Exchanger

Assessment of heat pump with carbon dioxide/low-global warming potential working fluid mixture for drying process: Energy and emissions saving potential

Status and Development Trend of Heat Pump Drying Technique

Analysis and Optimization of the Performance of Closed Heat Pump Dryer Based on Zeotropic Mixtures

Simulation study of a heat pump drying system using a solar assisted flash tank vapor injection cycle

Thermodynamic Analysis of a Freeze-Dryer Utilizing Hygroscopic Solution

Experimental Study on Effects of Compressor Speed on a Heat Pump Dryer System with Auxiliary Solar Source

Operation and Control Analysis of Dual Evaporator Heat Pump-solar Drying System

Experimental Research on Drying-cloth Performance of Closed Heat Pump Dryer