Abstract:NiO, NiO-CuO, NiO-TiO2 and NiO-CeO2 were synthesized by the sol-gel method and further processed into catalysts for hydrogen production by the thermocatalytic decomposition of methane. The structures of the metal oxides and catalysts were extensively characterized by transmission electron microscopy, X-ray diffraction, energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, temperature-programmed reduction and N-2 adsorption. The catalytic performance of the catalysts was evaluated in terms of methane conversion and carbon yield. NiO had a BET surface area of 66 m(2) g(-1). When compared with NiO, NiO-CuO had a lower BET surface area of 13 m(2) g(-1), while NiO-TiO2 and NiO-CeO2 had higher BET surface areas of 161 and 133 m(2) g(-1), respectively. The resulting supported catalysts required increased reduction temperatures and had higher Ni 2p(3/2) binding energies, indicating strong metal-support interactions. For the Ni-Cu catalyst, the introduction of copper resulted in a lower Ni 2p(3/2) binding energy due to the charge transfer from Cu to the adjacent Ni atoms. The Ni catalyst showed a stable methane conversion of 0.39 at 550 degrees C. The presence of copper in the Ni-Cu catalyst increased the working temperature but decreased methane conversion. The Ni-TiO2 and Ni-CeO2 catalysts exhibited stable methane conversions of 0.56 and 0.60, respectively, at 575 degrees C. The lifetime tests of the catalysts revealed that the Ni catalyst had a life span of 600 min at 550 degrees C, resulting in a carbon yield of 121 g C per g Ni. The Ni-Cu, Ni-CeO2 and Ni-TiO2 catalysts had life spans of 670, 790 and 840 min at 575 degrees C, resulting in carbon yields of 171, 204 and 256 g C per g Ni, respectively. The structures of the resulting carbon products were characterized by transmission electron microscopy and X-ray diffraction. It was found that the morphologies of the resulting carbon products were dependent on the type of catalyst used.

Development of a Co–Ni bimetallic aerogel catalyst for hydrogen production via methane oxidative CO2 reforming in a magnetic assisted fluidized bed

Characterization of Aerogel Ni/Al2O3 Catalysts and Investigation on Their Stability for CH4-CO2 Reforming in a Fluidized Bed

Fluidization characteristics of aerogel Co/Al2O3 catalyst in a magnetic fluidized bed and its application to CH4–CO2 reforming

Ultrafine NiO–La2O3–Al2O3 aerogel: a promising catalyst for CH4/CO2 reforming

Novel Hierarchical Ni/Mgo Catalyst for Highly Efficient Co Methanation in A Fluidized Bed Reactor

Study of the Synthesis of Multi-Cationic Sm-Co-O, Sm-Ni-O, Al-Co-O, Al-Ni-O, and Al-Co-Ni-O Aerogels and Their Catalytic Activity in the Dry Reforming of Methane

Preparation adjacent Ni-Co bimetallic nano catalyst for dry reforming of methane

Nano-MgO: Novel Preparation and Application As Support of Ni Catalyst for CO2 Reforming of Methane

Aerosol metal-organic framework-derived Ni–Zn–Al hybrid catalyst for efficient methane Bi-reforming

Combination of CO2 Reforming and Partial Oxidation of Methane over Ni/BaO-SiO2 Catalysts to Produce Low H2/CO Ratio Syngas Using a Fluidized Bed Reactor

Synthesis of Co2Ni/reduced Graphene Oxide Composite Aerogels As Efficient Hydrogen Evolution Catalysts

Bimetallic Ni-Co catalysts for co-production of methane and liquid fuels from syngas

An Al2O3-supported NiFe bimetallic catalyst derived from hydrotalcite precursors for efficient CO2 methanation

Study on CO2 reforming of methane to syngas over Al 2O3-ZrO2 supported Ni catalysts prepared via a direct sol-gel process

Hydrogen production by CO2 reforming of CH4 in coke oven gas over Ni–Co/MgAl2O4 catalysts

Syngas Production from Reforming of Methane with Co2 and O-2 over Ni/Sro-Sio2 Catalysts in A Fluidized Bed Reactor

Methane Dry Reforming by Ni–Cu Nanoalloys Anchored on Periclase-Phase MgAlO x Nanosheets for Enhanced Syngas Production

Sol–gel synthesis of Ni and Ni supported catalysts for hydrogen production by methane decomposition

Methane Dry Reforming by Ni-Cu Nanoalloys Anchored on Periclase-Phase MgAlO<i><sub>x</sub></i> Nanosheets for Enhanced Syngas Production

Ternary NiMo-Bi liquid alloy catalyst for efficient hydrogen production from methane pyrolysis

Carbon Dioxide Reforming of Methane over Cobalt‐Nickel Bimetal‐Doped Ordered Mesoporous Alumina Catalysts with Advanced Catalytic Performances