Abstract:Permanent magnets (PM) are critical components for electric motors and power generators. Key properties of permanent magnets, especially coercivity and remanent magnetization, are strongly dependent on microstructure. Understanding metallurgical processing, phase stability and microstructural changes are essential for designing and improving permanent magnets. The widely used PM for the traction motor in electric vehicles and for the power generator in wind turbines contain rare earth elements Nd and Dy due to their high maximum energy product. Dy is used to sustain NdFeB's coercivity at higher temperature. Due to the high supply risk of rare earth elements (REE) such as Dy and Nd, these elements are listed as critical materials by the U.S. Department of Energy and other international institutes. Other than Dy, finer grain size is also found to have effect on sustaining coercivity at higher temperature. A proper control of phase stability and microstructures has direct impact on mitigating REE supply risk. Compared to rare earth PMs, non-rare earth (non-RE) PMs typically have lower maximum energy products, however, given their small supply risks and low cost, they are being intensively investigated for less-demanding applications. The general goal for the development of non-RE PMs is to fill in the gap between the most cost-effective but low performing hard ferrite magnet and the most expensive but high performing RE PMs. In the past five years great progress has been made toward improving the microstructure and physical properties of non-RE PMs. Several new candidate materials systems were investigated, and some have showed realistic potential for replacing RE PMs for some applications. In this article, we review the science and technology of various types of non-RE materials for PM applications. These materials systems include Mn based, high magnetocrystalline anisotropy alloys (MnBi and MnAl compounds), spinodally decomposing alloys (Alnico), high-coercivity tetrataenite L10 phase (FeNi and FeCo), and nitride/carbide systems (such as α" based, high saturation magnetization Fe16N2 type phase and Co2C/Co3C acicular particle phase). The current status, challenges, potentials as well as the future directions for these candidates non-RE magnet materials are discussed.

Study of Novel Hard Magnetic Materials

Recent developments in hard magnetic bulk materials

Some Research Progress in R-Fe Hard Magnetic-Materials in China

Hard magnetic behaviours of composite materials of the iron nanoparticles and HDDR NdDy-FeCo-B powders

Study On The Magnetic Properties And Microstructure Of Nd-Fe-B Nanocomposite Permanent Magnets

Study on Magnetization Reversal Processes of Anisotropic HDDR Pr2Fe14B-Type Magnetic Materials

Research and Development of Interstitial Compounds

Revisiting Rare Earth Permanent Magnetic Alloys of Nd-Fe-C

Applied Magnetic Field Increases Magnetic Anisotropy in HDDR-Processed Nd-Fe-B Alloy

First-principles study of permanent magnets

Hard Magnetic Properties of NdFe10.5V1.5Nx Powders with High Performance

Nanocrystalline materials for high temperature soft magnetic applications: A current prospectus

Current Progress and Future Challenges in Rare-Earth-free Permanent Magnets

Permanent Magnets Beyond Nd-Dy-Fe-B

Preparation of Highly Textured Hydrogenation-Disproportionation-desorption-recombination Powders for Nd-Fe-B Sintered Magnets

Magnetic Property and Microstructure of Single Crystalline Nd2fe14b Ultrafine Particles Ball Milled from Hddr Powders

Micromagnetic analysis of the hardening mechanisms of nanocrystalline MnBi and nanopatterned FePt intermetallic compounds.

Magnetic properties and magnetic domain structures of NdFe10.5Mo1.5 and NdFe10.5Mo1.5Nx

Analysis on coercivity enhancement mechanism of grain-boundary-diffused and Dual-alloyed Nd-Fe-B Magnets

Hard magnet coercivity

Prospect and status of iron-based rare-earth-free permanent magnetic materials