Abstract:The evolution of microstructures for different hydrogen decrepitated routes was investigated in hydrogenation-disproportionation-desorption-recombination (HDDR) magnetic powders, with particular focus on the fracture of the SC heat-treated alloy during two-step hydrogen decrepitation (HD) and the influence of the first step temperature on magnetic properties. As the temperature increases, the properties of the magnetic powders increase and then decrease, the optimized performance of HDDR magnetic powders was obtained with B r =1.45 T, (BH) max =393 kJ·m −3 , DOA=0.79 when the first HD temperature is 65°C. The microscopic analysis shows that there are two problems in the one-step HD route: one is that the particle size is larger ∼150 μm and there are incomplete fractured cracks, the particle surface is more PrNd-rich phase, which leads to different reaction rates between the surface and center in HDDR particles, and the texture orientation of the fine grains at the edge of surface and crack is disordered. The second issue is that HD grains have significant angular difference with the c-axis orientation in incomplete fractured grain clusters, which is directly inherited by the HDDR magnetic powder, resulting in a misalignment texture. In comparison, the two-step HD process effectively addresses the issues derived from one-step HD process. Not only is the grain size of HDDR magnetic powders uniform and the width of the thin grain boundary phases (GBs) is less than the exchange coupling length, but also (Fe+Co) content exceeding 30 at% in GBs with weak magnetism. This is beneficial for enhancing exchange coupling effect between adjacent grains. Moreover, magnetic powder particle exhibits single-domain characteristics, which improves the grain texture orientation. This research provides a new insight for the development of high-orientation and high-performance HDDR magnetic powders.

Applied Magnetic Field Increases Magnetic Anisotropy in HDDR-Processed Nd-Fe-B Alloy

Magnetization Process in NANOPERM-type Nanocrystalline Alloy

Anisotropy optimization of HDDR magnetic powders by precursor alloy annealing

Reduction of the mechanical anisotropy in hot-deformed Nd-Fe-B magnets by the construction of heterogeneous structure

Effects of HDDR Treatment on Structure, Morphology and Particle Size of Nd-Fe-B Powders Prepared by Ball Milling of Nd-Fe-B Strip Cast Alloys

Study on Magnetization Reversal Processes of Anisotropic HDDR Pr2Fe14B-Type Magnetic Materials

Study on the Influence of Annealing and Ball Milling on the Magnetic Properties of HDDR Nd-Fe-B Magnetic Powder

Enhanced anisotropy of Pr-Nd-Fe-B HDDR magnetic powders by regulating the hydrogen decrepitated process

Coercivity enhancement in HDDR near-stoichiometric ternary Nd-Fe-B powders

Anisotropic Characteristic in Hddr Nd13fe80b7

Effects of magnetic annealing on magnetic properties in Nd4Fe76Co3 (Hf1-xGax) B-16 alloy

Design of High-Remanence Nd-Fe-B Hot-Pressed Magnets by Manipulating Coercivity of Hydrogenation-Disproportionation-Desorption-Recombination Treated Anisotropic Precursors

Analysis on coercivity enhancement mechanism of grain-boundary-diffused and Dual-alloyed Nd-Fe-B Magnets

Effects of the Disproportionation Stage of the HDDR Process on Magnetic Properties and Microstructure of Pr13Fe80B7 Alloys

Effect of high magnetic field assisted heat treatment on microstructure and properties of AlCoCrCuFeNi high-entropy alloy

Significant Progress for Hot-Deformed Nd-Fe-B Magnets: A Review

Effects of magnetic field annealing on the hard magnetic properties of milled Nd-Fe-B powders

Fabrication of Ternary NdFeB Anisotropy Powder by HDDR Process

Effect of Hd Process on Microstructure and Hard Magnetic Properties of Ndfealb Magnet

Magnetic Properties and Microstructure of High (bh)max Nd-Fe-B Sintered Magnet with Grain Boundary Diffusion Treatment

Fabrication of ternary NdFeB anisotropic magnet powder by HDDR process