Abstract:Small-scale model test is an economical and efficient method to study the collision process analysis and crashworthiness design of full-scale high-speed trains. For high-speed trains, the vehicle body thickness of scaled train models is too small to be processed, resulting in thickness distortion. Although the distorted model can predict dynamic responses of the full-scale model, there are some errors in predicting the dynamic response parameters. This article proposes a new similitude distortion method to improve the prediction accuracy of the high-speed train body distorted model. First, the complete similitude relationship for train collisions was derived using dimensional analysis. According to the Buckingham π theory, the theoretical expression between prediction coefficient and distortion coefficient was obtained when the high-speed train thickness distortion occurred. Then, based on a full-scale high-speed train body prototype, the benchmark model and distorted model were established. Numerical simulation was used to explore the relationship between prediction coefficient and distortion coefficient. Finally, the distorted similar model was established using the similitude distortion method. The accuracy and feasibility of this approach were verified by comparing and analysing the dynamic response curves obtained by numerical simulations between the distorted similar model and prototype. The errors of the maximum displacement and deceleration were 2.70% and 8.26%. The results show that the similitude distortion method is reliable to relate dynamic responses of scaled models to the prototype when the vehicle body thickness distorts.

Influence of Distorted Model on Flow Kinematic Similitude

Flow Pattern of Compound Section River Bend

3D Numerical Investigation of Distorted Scale in Hydraulic Physical Model Experiments

Study on the distorted scale in hydraulic physical model experiments by using 3D numeirical simulation

Experimental Study on Dynamical Characteristics of Ship Lift System

Suitability of Simulating Flow in Meandering Channel by Modified Depth-Averaged Model

Time Scale Distortion in a Movable-Bed Unsteady Flow Test and Its Improvement Methods

Effect of Load Frequency on Dynamic Similitude of Scaled Model

Two-dimensional sedimentation model of channel bend. Part 1. Development of the model

Physical modeling of oscillation effect on fluid flow in mold

Prediction and correction of scaling effects on velocity profile in hydraulic laboratory experiments

Consistent analyses of scale similitude in river model experiments

Scaling characteristics of the unified similarity criterion for geometrically distorted scale models

Study on time distorted scale for river bed deformed similarity of suspended movable-bed model

Comparison of Two Different Secondary Flow Correction Models for Depth-averaged Flow Simulation of Meandering Channels

Investigation on similitude method for dynamic response of high-speed train body considering thickness distortion

Time Distortion in Large Scale Sediment Model Tests

CFD modeling of distorted free surface flow

One-dimension Mathematical Model for Flow at Equal-Width Open-Channel Junction

Mechanism of Channel Pattern Changes and Its Numerical Simulation: Ⅱ.Application

Two-dimensional sedimentation model of channel bend. Part 2. Verification and application