Abstract:In order to explore the mechanism of the performance of Air-cooled system influenced by environmental temperature, indirect air-cooled towers with surface condensers in power plant were studied in this paper. Through a proper simplification, the geometric models of indirect air-cooled towers and other major buildings around which may affect the fluid flow were established. When it comes to the air-cooled towers, which were located in the central region of flow and heat transfer, the structure type of the towers and the radiators should be clearly presented. Flow resistance and heat transfer characteristics of radiators were correctly and objectively taken into account, the reliability of which was verified by field test. Numerical simulation study on the thermal performance of the indirect air-cooled system with surface condensers was conducted by creating corresponding mathematical and physical models on the condition of designed wind director and velocity. At the same time, the thermal performance of indirect air-cooled towers under different environmental temperature was studied. The results showed that, the volume flow rate of air into the indirect cooling tower under different environmental temperature is basically unchanged. With temperature rising up, the density of air reduces, which leaded to a decrease on the mass flow rate of air into tower. Besides, the trends and changing laws of performance parameters from the level of segments and the tower are achieved. What’s more, the flow traces of air and flue gas in towers were basically similar which were clearly divided by a temperature line, but the two flows always melt into a whole one at the export of towers. The conclusions would be of guide significance to the optimal operation and design of indirect air-cooled system.

Study on 200MW Direct Air-Cooling Unit for Variable Working Condition

Study on Variable Condition Features for 300MW Direct Air-cooling Unit

Study on Characteristics of 600 MW Directly Air Cooled Units Under Variable Operating Conditions

Study on Characteristics of a Dry/Wet Hybrid Cooling System under Variable Working Conditions

On the Dynamic Modeling and Control of the Cold-End System in a Direct Air-Cooling Generating Unit

Research on Simulation Model of Direct Air-cooled Condenser

Analysis on Optimization Operation of Cold End of 600MW Wet Cooling Sub-critical Air Cooling Unit

Modelling and Optimization of the Direct Air Cooling Power Generation Unit

Numerical research and analysis on operation performance of indirect air-cooled units in different conditions

Dynamic Modeling, Validation and Analysis of Direct Air-Cooling Condenser with Integration to the Coal-Fired Power Plant for Flexible Operation

Dynamic Modeling and Control of Direct Air-Cooling Condenser Pressure Considering Couplings with Adjacent Systems

Influences of Cooling Air Face Velocity and Temperature on Dynamic Characteristics of Direct Air-cooled System

Study on the Performance of Indirect Air-Cooled System Influenced by Environmental Temperature

Back-pressure Fuzzy Control of Direct Air Cooled Unit

Theoretic Studies on Changed Operating Modes for a Dual-pressure Condenser Unit

Investigation of the performance of cold-end system in direct air-cooled power units under the influence of ambient winds

Theoretical Research on Part Load Operation Performance of Hamen Indirect Air Cooled System

Analysis of flow fields and energy saving potentials for condenser exhaust pipes of air cooling units

Study on Operating Characteristics of Power Plant with Dry and Wet Cooling Systems

Optimization Tests on Main Steam Pressure for 600-MW Air-Cooling Heat Supply Units

Study and Application on Dynamic Simulation Model of Single-Pressure Water-Cooled Condenser