Abstract:Separation and sorting of particles (cells, beads, and droplets) is critical in a variety of biomedical applications including early disease diagnostics, therapeutics, cell tracking, and clinical research. Currently, standard microfluidic methods use 2D-chips fabricated using PDMS based soft lithography or embossing/etching materials such as Topas or glass. Often hydrodynamic flow focussing is used to spatially confine the sample flow to particular areas on the chip and so facilitate target species detection; however, 2D systems have limitations when it is necessary to make fine, micrometre scale, adjustments to flow profiles and/or the spatial position of the focused sample stream so as to match up with elements of external bulky equipment such as the laser or light paths of a spectrometer or internal fields used in electrical or acoustic actuation. These limitations can be overcome by using a 3D flow focussing method which can dynamically adjust the flow patterns within the sample chip (Figure 1a, left). For complex systems containing multiple sensor and actuation stages that are best made using hybrid construction of plug-and-play subsystems, a critical aspect of the overall functioning of the system is knowing at what points in time individual particles (e.g. cells, beads) are in the vicinity of different functional parts of the device. For high throughput and high particle densities, this becomes more difficult the larger the chip and the faster the flow. To address this, here we used a strategy of integrating several optical sensors into a hybrid device made from 3D printed and conventional soft lithography PDMS parts (Figure 1a, right), and so provide this timing data. Using these, it has then been possible to develop an automated flow-focusing and sorting microfluidic system with the flexibility and stability required for the sorting and refinement of labelled cells and beads (Figure 1b).

3D Mapping of Microfluidic Flow in Laboratory-on-a-Chip Structures Using Optical Tweezers

Measuring Flow Velocity Distribution in Microchannels Using Molecular Tracers

Quantitative 3D Mapping of Fluidic Temperatures within Microchannel Networks Using Fluorescence Lifetime Imaging

Measurement of 3D Flow Structure of Viscoelastic Fluid Using Digital Holographic Microscope

Anisotropic microfluidics and flow monitoring with a microchannel towards soft-matter sensing

Measurements of Three-Dimensional Flow in Microchannel with Complex Shape by Micro-Digital-Holographic Particle-Tracking-Velocimetry

Experimental and Numerical Research on the Flow in Microchannel with Barriers

A simple method for the evaluation of microfluidic architecture using flow quantitation via a multiplexed fluidic resistance measurement

Whole flow field digital particle image velocimetry technology for microfluidic device

Optic Imaging Of Single And Two-Phase Pressure-Driven Flows In Nano-Scale Channels Dagger

Two-Dimensional Mapping Separating the Acoustic Radiation Force and Streaming in Microfluidics

High-Throughput Microfluidic Particle Velocimetry Using Optical Time-Stretch Microscopy

3D Flow Field Measurements Outside Nanopores

Optical Control in a 3D Flow-Focusing Microfluidic Sorting System

3D visualization velocimetry technique for microfluidic based on optics coherence tomography

Optimised hyperbolic microchannels for the mechanical characterisation of bio-particles

Digital monitoring of the microchannel filling flow dynamics using a non-contactless smartphone-based nano-liter precision flow velocity meter

An Integrated Opto-Microfluidic Device for Microflow Cytometry

Three-dimensional Visualization and Analysis of Flowing Droplets in Microchannels Using Real-Time Quantitative Phase Microscopy

Three-Dimensional Opto-Fluidic Devices Fabricated by Ultrashort Laser Pulses for High Throughput Single Cell Detection and Processing

Rapid Prototyping of Three-Dimensional Microfluidic Mixers in Glass by Femtosecond Laser Direct Writing