Abstract:A novel underwater blast vibration test system is developed, consisting of a main acquisition storage terminal, software platform, and hole-blocking device was developed to experimentally collect and analyze the vibration data of submarine rocks exposed to drilling and blasting operations.Equations for predicting the vibration intensity during underwater drilling and blasting operations while accounting for the water depth were obtained via dimensional analysis, it is verified that water depth was an important factor affecting the vibration intensities felt by submarine rocks during underwater drilling and blasting by fitting the experimental vibration data.A reliable equation is proposed to predicting the vibration intensity induced by underwater blasting that incorporates the blasting distance, amount of charge, and the water depth of the blasting area and the measurement point as variables.All underwater drilling and blasting operations generate seismic waves. However, due to a lack of suitable vibration sensing instruments, most studies on the propagation of seismic waves have been limited to shorelines near construction areas or wharfs, whereas comparatively few studies have been conducted on the larger seafloor itself. To address this gap, a seafloor vibration sensor system was developed and applied in this study that consists of an autonomous acquisition storage terminal, software platform, and hole-plugging device that was designed to record the blasting vibration intensities received through submarine rocks at a given measurement point. Additionally, dimensional analyses were used to derive a predictive equation for the strength of blast vibrations that considered the influence of the water depth. By combining reliable vibration data obtained using the sensor system in submarine rock and the developed predictive equation, it was determined that the water depth was an important factor influencing the measured vibration strength. The results using the newly derived equation were compared to those determined using the Sadowski equation, which is commonly used on land, and it was found that predictions using the derived equation were closer to the experimental values with an average error of less than 10%, representing a significant improvement. Based on these results, the developed sensor system and preliminary theoretical basis was deemed suitable for studying the propagation behavior of submarine seismic waves generated by underwater drilling and blasting operations.

Study on Blasting Vibration Simulating Darthquake

Study on Vibration-Damping Blasting Technique for Early-Age Concrete

STUDY OF SAFETY EVALUATION METHOD OF BLASTING VIBRATION BASED ON INPUT ENERGY

Numerical Simulation of Shock Wave Caused by Underwater Blasting

Reduction of Blasting Induced Ground Vibrations Using High-Precision Digital Electronic Detonators

Research on vibration effect of tunnel blasting based on an improved Hilbert–Huang transform

Monitoring and Prediction of the Vibration Intensity of Seismic Waves Induced in Underwater Rock by Underwater Drilling and Blasting

Blast Shock and Vibration of Underground Structures with Conventional Weapon

Field Measurement and Numerical Simulation of the Influence of Blasting Excavation on Adjacent Buried Pipelines

Study on Blasting Characteristics of Soft-Hard Rock Strata Based on Energy Fields and Particle Expansion Loading Algorithm

A laboratory method to simulate seismic waves induced by underground explosions

Experimental and Numerical Investigation of Blast-Induced Vibration for Short-Delay Cut Blasting in Underground Mining

Vibration response and evaluation system of cross-tunnel blasting

Damage Analysis of Concrete Structure under Multidirectional Shaped Charge Blasting Using Model Experiment and Ultrasonic Testing

A Study on the Vibration Frequency of Blasting Excavation in Highly Stressed Rock Masses

Comparative study on tunnel blast-induced vibration for the underground cavern group

Blasting Vibration Monitoring Scheme and Its Application

Analyses on Seismic Effect and Safety Standard of Karst Tunnel Excavation Blasting

Study of slope vibration site effects and energy analysis from CO2 static blasting

The analysis of damage mechanisms and vibration effects caused by cut blasting under various void shapes