Abstract:Carbon-based materials, as some of the most important electrode materials for supercapacitors (SC), have spurred enormous attentions. Now, it is highly desirable but remains an open challenge to design stable and high-capacity carbons for further enhancing supercapacitive function. Here, a facile chemical activation recipe is introduced to develop biomass-derived functional carbons using cheap and abundant natural resources, anthracite, as the heteroatom-rich carbon sources, and potassium hydroxide (KOH) as activator. These porous carbons have high BET surface areas of roughly 2814 m2 g−1, large pore volumes of up to 1.531 cm3 g−1, and a high porosity that combines micro- and small-sized mesopores. The optimal nanocarbon features two additional outstanding virtues: an appropriate N-doping level (2.77%) and a uniform pore size distribution in the narrow range of 1–4 nm. Synergy of the above unique structural traits and desirable chemical composition endows resultant samples with the much boosted supercapacitive property with remarkable specific capacitance at varied current densities (e.g., 325 F g−1 at 0.5 A/g), impressive energy/power density, and long cycling stability over 5000 cycles at 10 A g−1 (92% capacity retention). When constructing the symmetric supercapacitor utilizing a common neutral Na2SO4 electrolyte that can strongly circumvent the corrosion effect occurring in the strong acid/alkaline solutions, both an elevated operation voltage at 1.8 V and a fascinating energy density of 23.5 Wh kg−1 are attained. The current study paves the way to explore the stable, efficient, and high-voltage SC assembled by the anthracite-derived porous doped nanocarbons for a wide spectrum of applications like automobiles, vehicle devices, and so on.

Porous Carbons Prepared from Deoiled Asphalt and Their Electrochemical Properties for Supercapacitors

Nitrogen-functionalized Microporous Carbon Nanoparticles for High Performance Supercapacitor Electrode

Hydrangea-like N/O codoped porous carbons for high-energy supercapacitors

Nanoarchitectonics of fulvic acid based oxygen-rich hierarchical porous carbon with high specific surface area as supercapacitor electrodes

Hierarchical Micro/Mesoporous Carbons Synthesized with a ZnO Template and Petroleum Pitch via a Solvent-Free Process for a High-Performance Supercapacitor

Mesoporous Carbon Nanofibers for Supercapacitor Application

Facile and low-cost fabrication of interconnected hierarchically porous carbon for high-performance supercapacitors

Production of Porous Carbon by the Synergistic Chemical and Physical Activations and its Capacitive Performance

Coal tar pitch-based porous carbon by one dimensional nano-sized MgO template

Self-template and self-activation synthesis of nitrogen-doped hierarchical porous carbon for supercapacitors

A novel mesoporous carbon with straight tunnel-like pore structure for high rate electrochemical capacitors

A Comprehensive Study on Koh Activation of Ordered Mesoporous Carbons and Their Supercapacitor Application

Facile Preparation of Porous Carbons Derived from Orange Peel Via Basic Copper Carbonate Activation for Supercapacitors

Biobased Nano Porous Active Carbon Fibers for High-Performance Supercapacitors

Porous Doped Carbons from Anthracite for High-Performance Supercapacitors

Nitrogen and Phosphorus Co-doped Porous Carbon for High-Performance Supercapacitors

Enhancing the pore wettability of coal-based porous carbon as electrode materials for high performance supercapacitors

Porous Carbon Electrode from Starch Soluble for Realizing High‐Performance Supercapacitor

Constructing the Interconnected and Hierarchical Nanoarchitectonics in Coal-Derived Carbon for High-Performance Supercapacitor

Porous Carbon Material Derived from Steam-Exploded Poplar for Supercapacitor: Insights into Synergistic Effect of KOH and Urea on the Structure and Electrochemical Properties

Nitrogen-doped hierarchical porous carbon as an efficient electrode material for supercapacitors