Abstract:Phase sensitive optical time domain reflectometry (Φ-OTDR) has been widely used in many applications for its distributed sensing ability on weak disturbance all along the sensing fiber. However, traditional Φ-OTDR cannot make quantitative measurement on the external disturbance due to the randomly distributed position and reflectivity of scatters within the optical fiber. Recently, some methods have been proposed to realize quantitative measurement of dynamic strain. In these literatures, the fiber with or without FBGs in practice was easily damaged and with difficulty of maintenance. PZT is employed to generate strain event in the fiber. There is a large gap compared with the real detecting environment, which will not reveal the full performance of the sensing system. In this paper, a distributed optical fiber sensing (DOFS) system for dynamic strain measurement based on artificial reflector is proposed and demonstrated experimentally. The fiber under test (FUT) is composed by four 20-meter long single mode optical fiber patch cords (OFPCs), which are cascaded with ferrule contactor/physical contact (FC/PC) connectors via fiber flanges. The fiber facet of FC/PC connector forms an artificial reflector. When the interval between the two reflectors is changed, the phase of the interference signal will also be changed. A symmetric 3×3 coupler with table-look-up scheme is introduced to discriminate the phase change through interference intensity. In our experiment, the center 10m section of the second OFPC is attached to the bottom of an aluminum alloy plate. An ordinary loudspeaker box was located on the top of the aluminum alloy plate. The dynamic strain generated by the loudspeaker box is transmitted from the aluminum alloy plate to the OFPC. Experimental results show that the proposed method has a good frequency response characteristic up to 3.2 kHz and a linear intensity response of R2=0.9986 while the optical probe pulse width and repetition rate were 100ns and 10 kHz respectively. Meanwhile, triangle and cosine amplitude-modulated (AM) dynamic strain applied on the fiber are successfully discriminated. The artificial reflectors based on FC/PCs were easily assembled and maintained, and the method of vibration transmission closely resembled the real circumstance than PZT. Therefore, these advantages will extend the potential of this Φ-OTDR technology in structure health monitoring.

Distributed Fiber-Optic Stress-Location Measurement by Arbitrary Shaping of Optical Coherence Function

Distributed Fiber Optic Stress Sensing by Synthesis of Arbitrary-Shaped Coherence Function

Optical Fiber Stress-Location Measurement by Synthesis of Binary Optical Coherence Function

Unification of Input and Output Ends in Polarization-Maintaining Optical Fiber Stress Sensor by Synthesis of Optical Coherence Function (invited Paper)

Distributed Fiber Optic Stress Sensor System Based on P-OFDR

High Spatial Resolution Fiber-Optic Distributed Lateral-Stress Sensing by Stepwise Frequency Modulation of a Super Structure Grating Distributed Bragg Reflector Laser Diode

Experimental Research on an Optical Fiber Temperature and Stress Sensor Based on the Time Offset

Application of Synthesized Coherence Function to Distributed Optical Sensing

&Lt;title>distributed Optical Fiber Pressure Sensor</title>

Quasi-distributed frequency-modulated continuous-wave reflectometric optical fiber strain sensor

Stable Entire-Length Measurement of Fiber Strain Distribution by Brillouin Optical Correlation-Domain Reflectometry Based on Polarization Scrambling Scheme

Synthesis of Optical-Coherence Function and Its Applications in Distributed and Multiplexed Optical Sensing

Distributed Transverse Stress Sensor Based on Mode Coupling in Weakly-Coupled FMF

Measurement of stress vector based on polarization ptychography

High Speed Bocda Measurement of Strain Distribution by Longitudinal Sweep Method

Distributed Fiber Deformation Measurement by High-Accuracy Phase Detection in OFDR Scheme

Distributed Fiber Optic Strain Sensing by Synthesizing Dynamic Grating in Polarization-Maintaining Erbium-Doped Fiber

Distribution Sensing by Synthesis of the Optical Coherence Function

A Multiplexed Optical Fiber Sensor System For Distributed Measurement Of Structural Strains

A Distributed Optical Fiber Sensing System for Dynamic Strain Measurement Based on Artificial Reflector

Novel Distributed Fiber-Optic Strain Sensor by Localizing Dynamic Grating in Polarization-Maintaining Erbium-Doped Fiber: Proposal and Theoretical Analysis