Abstract:In this paper, a finite element (FE) model for rotating-flexible shaft-disk-drum (SDR) system with bolted joints is established based on beam-shell-spring hybrid elements by in-house codes. Rotation-induced effects, that is, centrifugal effect, initial tension, gyroscopic moments, and geometric non-linearity due to large deformation are taken into account. Besides, fixed interface mode synthesis method is applied to improve solving efficiency. The proposed model is verified by the results from literature and experiments. Finally, the effects of the number of bolts, rotating speed, connecting stiffness, and the location of disk-drum on the natural characteristics of SDR system are investigated. The main conclusions are summarized as follows: (1) Modes dominated by different components have different sensitivities to the variations of the number of bolts. (2) The analysis of Campbell diagram indicates that frequency veering phenomenon can be found among the shaft bending (SB) mode, disk transverse (DT) mode, disk swing (DS) mode and drum one-circumferential wave (1CW) mode in low-order modes, and the disk nodal diameter (ND) mode always couples with the drum CW mode in high-order modes. (3) The change of axial connecting stiffness will cause the coupling vibration between the disk and drum, while the change of transverse shear stiffness not only causes the coupling vibration between the disk and the drum, but also the coupling vibration among the shaft, disk and drum. (4) The change of disk-drum location can affect the modes associated with the shaft SB and cause frequency veering phenomena. The disk ND modes and the drum CW modes are not coupled with the shaft SB modes when the number of ND and CW are greater than 2.

Effect of Flexible Couplings on Response of a Vibration System

INFLUENCE OF NONLINEAR STIFFNESS OF FLEXIBLE COUPLING ON TORSIONAL VIBRATION

The Application of Sensitivity Method in Vehicle Dynamics Analysis

INFLUENCE OF NONLINEAR DAMPING OF FLEXIBLE COUPLING ON TORSIONAL VIBRATION REDUCTION

Active Control on Coupled Bending-Torsion Vibration of Two-Link Space Flexible Component

Study on Electromechanical Coupling Characteristics of Electric Vibration Table in High-Translational-Acceleration

Response Adjustability Analysis of Partial and Ordinary Differential Coupling System for Visco-Elastomer Sandwich Plate Coupled with Distributed Masses under Random Excitation via Spatial Periodicity Strategy

Transient analysis of multi-field coupling on suspension inertial vibration machine

Structural Flexibility Effect on Spaceborne Solar Observation System's Micro-Vibration Response

THE FUNCTION OF FLEXIBLE COUPLING ON REDUCING TORSIONAL SHOCK MOVEMENT OF THE ROTOR SYSTEM

Semi-active Bounded Optimal Control of Uncertain Nonlinear Coupling Vehicle System with Rotatable Inclined Supports and MR Damper under Random Road Excitation

Coupling vibration analysis for harmonic drive in joint and flexible arm undergoing large range motion

Vibration analysis of a flexible gearbox system considering a local fault in the outer ring of the supported ball bearing

External and internal coupling effects of rotor's bending and torsional vibrations under unbalances

Analytical and Experimental Study of Coupling Vibration F Nonlinear Connected Beams

Coupling vibration characteristics of the shaft-disk-drum rotor system with bolted joints

Study on vibration response and orbits of misaligned rigid rotors connected by hexangular flexible coupling

Resonant Suppression of Flexible System by Feedback Compensation of Resonant Frequencies

Modeling and Observer-Based Vibration Control of a Flexible Spacecraft With External Disturbances

Vibration control using nonlinear damped coupling

The Structural Flexibility Effects on the System Impact Dynamics