Abstract:Journal of Intelligent Material Systems and Structures, Ahead of Print. To solve the problems of poor transmission performance and small torque regulation range of traditional MR device, a variable working gap MRF transmission device driven by electromagnetic force is proposed. The device uses electromagnetic force driving the squeeze disk to move axially to squeeze the MRF, thereby changing the number of working gaps and effective working thickness of the MRF to improve the transmission performance of the MR device. Based on the coil magnetization effect, the relationship between current, magnetic field intensity, and electromagnetic force is established. According to the driving characteristics of electromagnetic force and the rheological characteristics of MRF, a nonlinear function relationship between electromagnetic force and MRF working gap thickness and working volume is derived. Using the finite element method, a theoretical analysis of the magnetic circuit design, magnetic field distribution and temperature change profile in different parts of MRF device with different currents was conducted, the MRF torque transfer equations were deduced and calculated, and experimentally verified the correctness of the theoretical equations. Finally, the transmission performance of the variable working gap MRF transmission device is tested through the established testing system. Results show that, the required squeeze force is 6.65 kN when the MRF thickness reaches 1 mm in both working gaps. As the current increases from 0.5 to 3.0 A, the electromagnetic force increases from 0.65 to 6.77 kN, with an increase of 972.3%, the average temperature of the MRF in working gap I increases from 25.2°C to 71.2°C and the MRF in working gap II increases from 23.5°C to 48.3°C. When the current is 1.5 A, the MRF in the working gap I reaches magnetic saturation, continue to increase the current to 3.0 A, the MRF thickness in both working gaps is 1 mm, and the MR device transmits torque reach 376.6 N·m, which is 72.3% higher than that of the traditional MR device.

Research on Torque-Angle Characteristic of Large Gap Magnetic Drive System

Dynamic and static characteristics analysis of air-gap magneticfield of a large displacement angular vibrator

Magnet circuit design and optimization of giant magnetostrictive transducer

Research on the Rotary-Linear Motion Magnetic Gear Based on Ansys

Simulation and Experimental Study of the Coupling Drive Magnetic Field for Embedded Giant Magnetostrictive Actuators

A Kind of Spatial Angular Magnetic Gear Transmission

Static simulation research on a new magnetic gear

Torque Calculation Model and Structural Optimisation of Axial Magnetic Drive Mechanism

A STUDY ON FORCE CHARACTERISTIC OF LARGE AIRGAP LINEAR INDUCTION MOTOR

Analysis on Structural Parameters and Electromagnetic Meshing for Toroidal Electromechanical Drive

Research on High Precision Drive System of Permanent Magnet Synchronous Motor

DESIGN FOR ELLIPSE MOTION DRIVEN MOTOR MADE OF GIANT MAGNETOSTRICTIVE MATERIAL

Design and Analysis of Outer Rotor Permanent-Magnet Vernier Machines with Overhang Structure for In-Wheel Direct-Drive Application

Investigation of Characteristics of a Novel Torque Motor Based on an Annulus Air Gap

Transient Analysis and Verification of a Magnetic Gear Integrated Permanent Magnet Brushless Machine With Halbach Arrays

Analysis and experimentation of variable gap magnetorheological transmission device driven by electromagnetic force

Geometric Modeling and Meshing Characteristics of the Toroidal Drive

Design and 2D Finite Element Analysis for a Novel Magnetic Gear Integrated Brushless Permanent Machine

Analytical Modeling of A Novel Vernier Pseudo-Direct-Drive Permanent-Magnet Machine

Modeling and Simulation of Field Oriented Controlled Large Air-gap Linear Induction Motor

Magnetic Circuit Design and Experiment of Novel Lorentz Magnetic Bearing with Double Air Gap