Abstract:Highlights • Unique physical modelling is designed to explore the effects of retained material on the impact, overflow and landing mechanisms. • An analytical model is introduced to evaluate the variations of flow velocity and flow depth after interacting with the retained materials and to calculate the peak impact force on the obstacle. • It is demonstrated that existing overflow model can underestimate the landing distance by up to 30%, and therefore is insufficient in the design of dam when there is retained material. • The recommended correction factor R = 0.7 by previous studies for quantifying C r in landing models can overestimate the energy dissipated from geophysical flow impacting the flume bed. During long-term operation, the performance of obstacles would be changed due to the material accumulating upslope the obstacle. However, the effects of retained material on impact, overflow and landing dynamics of granular flow have not yet been elucidated. To address this gap, physical flume tests and discrete element simulations are conducted considering a range of normalized deposition height h 0 / H from 0 to 1, where h 0 and H represent the deposition height and obstacle height, respectively. An analytical model is modified to evaluate the flow velocity and flow depth after interacting with the retained materials, which further serve to calculate the peak impact force on the obstacle. Notably, the computed impact forces successfully predict the experimental results when α ≥ 25°. In addition, the results indicate that a higher h 0 / H leads to a lower dynamic impact force, a greater landing distance L , and a larger landing coefficient C r , where C r is the ratio of slope-parallel component of landing velocity to flow velocity just before landing. Compared to the existing overflow model, the measured landing distance L is underestimated by up to 30%, and therefore it is insufficient for obstacle design when there is retained material. Moreover, the recommended Cr in current design practice is found to be non-conservative for estimating the landing velocity of geophysical flow. This study provides insightful scientific basis for designing obstacles with deposition.

Analysis on Water and Landing Impact Compatibility for Space Capsule

Water Impact Simulations and Analyses of Space Capsule Response Characteristics

Impact Analysis During Docking Process of Autonomous Underwater Vehicle

Research on Impact Process of Lander Footpad Against Simulant Lunar Soils

Numerical Study on Impact of Lunar Lander Footpad Against Simulant Lunar Soil

Back-Analyses of Landfill Instability Induced by High Water Level: Case Study of Shenzhen Landfill

Study on Impact Energy Absorption and Adhesion of Biomimetic Buffer System for Space Robots

Model Test Study of Vertical Impact of Space Lander Footpad

Experimental Study of Sliding Forces of Lander Footpad in Simulant Lunar Soil

Test and numerical analysis for water entry of elastic cabin from amphibious aircraft

Multi-Objective Optimization Design of an Origami-Inspired Combined Cushion Airbag

Dynamic Model for the Seat-Bumper System Reducing the Manned Spacecraft Landing Impact

Interface Property Between Soft Landing Foot Pad And Simulant Lunar Soil

Study on evaluation guideline and injury factor of head,neck,thorax and vertebra during high G landing impact

Crash simulations of aircraft fuselage section in water impact and comparison with solid surface impact

Simulation and analysis of chest loads on crews during Lunar-Earth re-entry returns

On applicability of von Karman's momentum theory in predicting the water entry load of V-shaped structures with varying initial velocity

Effects of retained dry material on the impact, overflow and landing dynamics

Analysis and Test of Shock Response of an Anti-impact Chair

Survivability assessment of spacecraft impacted by orbit debris

Soft-landing dynamics of a type of four-legged space lander