Abstract:This paper presents the preparation and characterization of bentonite coated with hydroxide double lamellar Mg/Al-bentonite and Zn/Al-bentonite as a potential adsorbent material. The coating process involved co-precipitation of mixed metal nitrate solution (Mg-Al) or (Zn-Al), followed by immersion of bentonite (B-Na+) dispersion. The structures and morphologies of the coated bentonites were characterized using XRD, FTIR, BET, and SEM analysis. The results of the BET analysis indicate that Mg/Al-bentonite and Zn/Al-bentonite have larger surface areas and pore volumes compared to bentonite alone. Specifically, the surface area of Mg/Al-bentonite is 209.25 m2/g with a pore volume of 0.423 cm3/g, while Zn/Al-bentonite has a surface area of 175.95 m2/g and a pore volume of 0.313 cm3/g. In contrast, the surface area and pore volume of bentonite alone are 110.43 m2/g and 0.132 cm3/g, respectively. The Mg/Al-bentonite reaches 85% uptake within 3 h (equivalent to 724.20 mg/g at 25 °C and pH 7), achieving rapid equilibrium. In contrast, the Zn/Al-bentonite achieves a maximum adsorption of 74% within 5 h under identical pH and temperature conditions, corresponding to 650.34 mg/g. The error function values, including the correlation coefficient R2, chi-square test χ2, and residual sum of squares RSS, were calculated to evaluate both kinetic and isotherm models. The kinetic adsorption data agreed well with a pseudo-second-order model. The adsorption process followed the Sips isotherm model, and the monolayer adsorption capacity of Mg/Al-bent and Zn/Al-bent composites was 872.41 (R2 = 0.974) and 678.45 mg/g (R2 = 0.983), respectively. The thermodynamic analysis of the adsorption process revealed that it occurred spontaneously with an endothermic characteristic. The parameters ΔS, ΔH, and ΔG were used to determine this.

Cationic Polyelectrolyte/bentonite Prepared by Ultrasonic Technique and Its Use As Adsorbent for Reactive Blue K-GL Dye.

Formation and characteristics of cationic-polymer/bentonite complexes as adsorbents for dyes

A comparative study on the properties, mechanisms and process designs for the adsorption of non-ionic or anionic dyes onto cationic-polymer/bentonite

Adsorption of Congo Red Dye Onto Raw and Chitosan-Modified Bentonite

Kinetic Study and Equilibrium Isotherm Analysis of Cationic Dye Adsorption Onto Attapulgite and Rectorite

Adsorption of Pb (II) from Aqueous Solution by Modified Bentonite

Adsorption of Rhodamine B from Simulated Waste Water onto Kaolin-Bentonite Composites

Adsorption of methylene blue dye onto bentonite clay: Characterization, adsorption isotherms, and thermodynamics s tudy by using UV-Vis technique

Removal of Reactive Blue 13 from Dyeing Wastewater by Self-Assembled Organobentonite in A One-Step Process

Attapulgite/bentonite interactions for methylene blue adsorption characteristics from aqueous solution

Study on Kinetics and Adsorption of Acid Blue Onto Anion-Cation Organobentonite.

Bentonite/Sesbania Gum Hydrogel for Effective Removal of Cationic Dyes: Network Structure Construction and the Role of Multiple Hydroxyl and Carboxyl Adsorption Sites

Synthesis of a Cationic Polymer-Bentonite Composite Utilizing a Simple and Green Process for the Adsorption of Acid Orange 7 from Aqueous Solution

Study On The Adsorption Of Dyes Using Diatomite And Activated Carbon

Mechanism of Adsorption of Anionic Dye from Aqueous Solutions Onto Organobentonite.

Sorption of wastewater containing reactive red X-3B on inorgano-organo pillared bentonite

Bentonite blended with bagasse ash as an adsorbent for reactive red 198 dyes

Adsorption characteristics, isotherm, kinetics, and diffusion of modified natural bentonite for removing diazo dye

Performance of Mg/Al and Zn/Al Hydroxide Double Lamellar-Bentonite for Removal of Anionic Azo Dye from Aqueous Solution

Treating Dye Wastewater of Reactive Brilliant Red K-2bp by Cetyltrimethylammonium Chloride-Modified Bentonite with Polyacrylamide Flocculant

Treatment of Dye Wastewater by Bentonite Adsorption and Catalysis