Abstract:Organic aerogels represent an interesting new class of materials and as the basis for the generation of new carbonaceous materials, both finding application in catalytic and adsorbent technology.(1) These are prepared via the synthesis of an aqueous colloidal gel composed Of Suitable precursors. The gel state is generated by the formation of new chemical (i.e. polymerisation), and physical (i.e. hydrogen bonding) bonds, as ageing proceeds. The colloidal gel has a well-developed micro- and mesoporosity as well as large surface area. By fine-tuning the synthesis conditions, the pore architectures may be controlled. The solvent is subsequently removed to yield the aerogel, via extraction by supercritical fluids. For that CO2 is a rational choice as its critical point can be easily reached, and offers a wide range of temperatures and pressures, facilitating another dimension in material property control. The most commonly used precursors to generate the gel state are formaldehyde and resorcinol or its derivatives(2), but may also be prepared from the aqueous gelation and self-assembly of biomass derived polysaccharides.The transformation of organic aerogels via a controlled non-oxidative pyrolysis step, to produce low-density carbons is of increasing interest as the advantages of these materials become more evident. Carbon aerogels are chemically and mechanically more stable than the organic predecessor, provide excellent conductivity, and can be employed at high temperatures and pH. Control of carbon aerogel textural and surface properties is possible by selection of different organic precursors and careful selection of thermal treatment parameters. Interestingly, polysaccharide xerogels and aerogels may also be transformed into like carbons. which are termed Starbons (R)(3).Because of close relationship between certain organic and carbon aerogels in this chapter attention will be given to both. A detailed introduction to the synthesis and processing, characterisation and application of organic and carbon aerogels will be presented. The physical and chemical characteristics of these materials will be discussed in detail, with particular regard to density, specific surface area and porosity. Applications of aerogels will also be introduced, with a particularly accent on their use as heterogeneous catalyst supports. Future prospects for this exciting class of materials will also be proposed.

Organic and Carbon Aerogels from the NaOH‐catalyzed Polycondensation of Resorcinol–furfural and Supercritical Drying in Ethanol

On Porosity of Carbon Aerogels from Sol-Gel Polymerization of Phenolic Novolak and Furfural

Synthesis and characterization of phenolic-furfural based carbon aerogels

Synthesis Of A New Organic Aerogel

Organic Aerogels As Precursors For The Preparation Of Porous Carbons

MICROSTRUCTURE EVOLUTION IN THE PREPARATION OF CARBON AEROGELS BY SMALL ANGLE X-RAY SCATTERING

Preparation and Microstructure Control of Carbon Aerogels Produced Using M-Cresol Mediated Sol-Gel Polymerization of Phenol and Furfural

Effect of Hydrophilic Groups in the Polymer Matrix on the Porosity of Organic and Carbon Aerogels Produced from Melamine, Phenolic Resole and Formaldehyde

A Comparative Study of Supercritical Petroleum Ether and Carbon Dioxide Drying in the Preparation of Carbon Aerogels

Effect of hydrophobic group in polymer matrix on porosity of organic and carbon aerogels from sol–gel polymerization of phenolic resole and methylolated melamine

Synthesis of ultrahigh-pore-volume carbon aerogels through a “reinforced-concrete” modified sol–gel process

Characterization of resorcinol-formaldehyde aerogel powder

Effect of Oxidation of Phenolic–furfural Aerogels on Pore Structures of Carbon Aerogels

Study on Phloroglucinol-Acetaldehyde Organic Aerogels

Low-density, high-strength and large-scaled monolithic carbon aerogels fabricated via modified ambient pressure drying

Synthesis and Structure of Carbon/Silica Hybrid Aerogels

Organic solvents-free and ambient-pressure drying melamine formaldehyde resin aerogels with homogeneous structures, outstanding mechanical strength and flame retardancy

Ambient-pressure drying synthesis of large resorcinol–formaldehyde-reinforced silica aerogels with enhanced mechanical strength and superhydrophobicity

Effect of concentration of reactants on porosity of hydrogels, organic and carbon aerogels

Preparation and characterization of phenol-melamine-formaldehyde aerogels

Synthesis and Characterization of MF Aerogels