Study on Production of CH<sub>4</sub>in Hydrogen Purification with Palladium−Silver/Ceramic Composite Membranes

Li Yang,BingJia Yao,Tomonori Takahashi
DOI: https://doi.org/10.1021/ie900624v
2010-01-01
Industrial & Engineering Chemistry Research
Abstract:Hydrogen was purified by a series of Pd-Ag/ceramic composite membranes with different Pd-Ag alloy thickness ranging from 2.5 to 15 mu m. During the process, methane (CH4) was found to be formed in the permeated gas, which was also reported in related studies. A comprehensive study was carried out to identify the source of CH4 by discussing the influence of membrane defect and feed composition with several gas mixtures as feed gas. It was found that CH4 content in the purified hydrogen increased with the defect degree, and for obtaining 99.9% permeated hydrogen, the helium leakage of the membrane should be less than 0.01 mL min(-1) cm(-2); whereas no helium flow should be detected, that is, the membranes should be completely defect-free, to achieve 99.999+% hydrogen. Meanwhile, different feed gases were used to discover the reason for production of CH4 during purification; the results revealed that only CO in the feed gas resulted in the formation of CH4 on the permeated side. Finally, on the basis of the above findings, a small amount of Au in the Pd-Ag alloy was added to examine the possibility of preventing CH4 formation, and the preliminary result was satisfactory.
What problem does this paper attempt to address?