Abstract:Underground rock masses have shown a general trend of natural balance over billions of years of ground movement. Nonetheless, man-made underground constructions disturb this balance and cause rock stability failure. Fractured rock masses are frequently encountered in underground constructions, and this study aims to restore the strength of rock masses that have experienced considerable fracturing under uniaxial compression. Coal and sandstone from a deep-buried coal mine were chosen as experimental subjects; they were crushed by uniaxial compression and then carefully restored by a chemical adhesive called MEYCO 364 with an innovative self-made device. Finally, the restored specimens were crushed once again by uniaxial compression. Axial stress, axial strain, circumferential strain, and volumetric strain data for the entire process were fully captured and are discussed here. An acoustic emission (AE) testing system was adopted to cooperate with the uniaxial compression system to provide better definitions for crack closure thresholds, crack initiation thresholds, crack damage thresholds, and three-dimensional damage source locations in intact and restored specimens. Several remarkable findings were obtained. The restoration effects of coal are considerably better than those of sandstone because the strength recovery coefficient of the former is 1.20, whereas that of the latter is 0.33, which indicates that MEYCO 364 is particularly valid for fractured rocks whose initial intact peak stress is less than that of MEYCO 364. Secondary cracked traces of restored sandstone almost follow the cracked traces of the initial intact sandstone, and the final failure is mainly caused by decoupling between the adhesive and the rock mass. However, cracked traces of restored coal only partially follow the traces of intact coal, with the final failure of the restored coal being caused by both bonding interface decoupling and self-breakage in coal. Three-dimensional damage source locations manifest such that AE events are highly correlated with a strength recovery coefficient; the AE events show a decreasing tendency when the coefficient is larger than 1, and vice versa. This study provides a feasible scheme for the reinforcement of fractured rock masses in underground constructions and reveals an internal mechanism of the crushing process for restored rock masses, which has certain instructive significance.

Damage and Deterioration Mechanism and Curing Technique of Concrete Structure in Main Coal Cleaning Plants

THE STATE OF THE ART OF CONCRETE STRUCTURE DURABILITY MONITORING AND RESTORATION

Grading the Environmental Area According to Its Effect on the Durability of Concrete Structures under Atmospheric Condition

Analysis and strengthening of superstructure diseases of concrete bridges in China

Degradation Mechanism of Coal Gangue Concrete Suffering from Sulfate Attack in the Mine Environment

Construction Measures for Defect Reinforcement of Concrete Structures in Nanshan Water Purification Plant

THE IN-SITU MONITORING PRINCIPLES AND THE RESIDUAL LIFE PREDICTION OF THE DURABILITY OF CONCRETE STRUCTURE IN MARINE ENVIRONMENT

Corrosion Damages of Reinforced Concrete Characterized by X-ray CT and DVC Techniques

Energy Evolution and Damage Deformation Behavior of Cemented Broken Coal Specimen under Triaxial Compression Condition

Optimization of field test method on durability of coastal concrete structure

Deterioration mechanism of coal gangue concrete under the coupling action of bending load and freeze–thaw

Progressive microstructural evolution characteristics and weakening mechanism of coal exposed to Acid Mine drainage (AMD)

Aging deterioration of mechanical properties on coal-rock combinations considering hydro-chemical corrosion

A Review on Concrete Structural Properties and Damage Evolution Monitoring Techniques

Multi-Scale Analysis of the Damage Evolution of Coal Gangue Coarse Aggregate Concrete after Freeze–Thaw Cycle Based on CT Technology

Strength Restoration of Cracked Sandstone and Coal under a Uniaxial Compression Test and Correlated Damage Source Location Based on Acoustic Emissions

Deformation and damage dynamic characteristics of coal–rock materials in deep coal mines

Study of the Microstructure of Industrial Residues and Its Application in High Performance Concrete

Phase transformation and microstructure of in-situ concrete after 20-year exposure to harsh mining environment: A case study

Experimental Investigation on Mechanical and Damage Properties of Single Fractured Coal Subjected to Water Pressure and Triaxial Compression

Corrosion damage and life prediction of concrete structure in the coking ammonium sulfate workshop of iron and steel industry