Abstract:The steel–concrete hybrid wind turbine tower is characterized by the concrete tubular segment at the lower part and the traditional steel tubular segment at the upper part. Because of the great change of mass and stiffness along the height of the tower at the connection of steel segment and concrete segment, its dynamic responses under seismic ground motions are significantly different from those of the traditional steel tubular wind turbine tower. Two detailed finite element models of a full steel tubular tower and a steel–concrete hybrid tower for 2.0 MW wind turbine built in the same wind farm are, respectively, developed by using the finite element software ABAQUS. The response spectrum method is applied to analyze the seismic action effects of these two towers under three different ground types. Three groups of ground motions corresponding to three ground types are used to analyze the dynamic response of the steel–concrete hybrid tower by the nonlinear time history method. The numerical results show that the seismic action effect by the response spectrum method is lower than those by the nonlinear time history method. And then it can be concluded that the response spectrum method is not suitable for calculating the seismic action effects of the steel–concrete hybrid tower directly and the time history analyses should be a necessary supplement for its seismic design. The first three modes have obvious contributions on the dynamic response of the steel–concrete hybrid tower.

Analysis of Seismic Response for the Adsorption Tower based on ANSYS

Finite Element Analysis of the Seismic Properties of Two-Tower High-Rise Steel Structures

Modality Analysis of Anchored Ion Exchange Tower Using Ansys

A New Method for Structural Aseismatic Computation of Tall TV Tower

Seismic Analysis for Plant Structure of 5 MW Nuclear Heating Reactor

Seismic performance evaluation on the south tower structure of Taiyuan Power Co.Office Building

Anti-Seismic Reliability Analysis of Quayside Container Crane

Seismic response analysis of steel–concrete hybrid wind turbine tower

Dynamic Response Analysis of Monopile CFDST Wind Turbine Tower System under Wind-Wave-seismic Coupling Action

STRUCTURAL ANALYSIS OF SMOKING DESULFURATION ABSORBER TOWER FOR KEMEN ELECTRIC PLANT

ANALYSIS OF THE IMPACT ON STRESS UNDER SEISMIC ACTION CAUSED BY STORAGE TANKS' PARAMETERS

Analysis of Time-History on the Seismic Properties of the Integral Structure after Adding Steel Storeys on Top of the Concrete Frame

STUDY ON ENGINEERING SEISMIC DESIGN BASED ON SAP2000 AND ANSYS MODELING

Anti-seismic Stress Analysis and Assessment of Nuclear Pressure Safety Valve

Seismic Response Analysis of Nuclear Low Pressure Cylinder and Condenser

Analysis of large concrete storage tank under seismic response

Finite Element Analysis on Seismic Properties of Steel Braced Frame Structure

Dynamic Characteristic and Aseismatic Analysis of High-rise Steel Structure Building with Horizontal Strengthened Floors

Finite Element Analysis of Drill Tower Structure Based on ANSYS

Seismic Response Analysis of Transmission Tower-Line System on a Heterogeneous Site to Multi-Component Spatial Ground Motions

DYNAMIC RESEARCH OF TRANSMISSION LINES TOWER-LINE SYSTEM