Abstract:In this paper, the Ag–Au–Al alloy is prepared, its effect on the microstructure and properties is observed by changing the content of aluminum. Ternary alloys are tested for hardness and resistivity. The results show that Ag‐15wt.%Au‐14wt.%Al alloy has the highest hardness and the lowest resistivity. The authors also used first‐principles calculations. The calculation results are in good agreement with the experiment. In this paper, the silver–gold–aluminum alloy is prepared, and its effect on the microstructure and properties is observed by changing the content of aluminum. SEM observes the surface morphology, EDS (Energy Dispersive Spectrometer) detects the related tissue composition, and XRD (X‐ray Diffraction) verifies the composition. Ternary alloys are tested for hardness and resistivity. The results show that Ag‐15wt.%Au‐14wt.%Al alloy has the highest hardness. The resistivity test shows that Ag‐15wt.%Au‐18wt.%Al alloy has the lowest resistivity. The change in Al content improves the alloy's mechanical properties and electrical conductivity. This paper uses the first‐principles calculation based on density functional theory to prove the structural stability from the atomic point of view. The mechanical properties, electrical properties, and thermodynamic properties of Ag‐Au‐Al ternary alloys are systematically studied, including elastic constants, elastic modulus (including bulk modulus B, shear modulus G, Young's modulus E, Poisson's ratio ν), Vickers hardness. The mechanical properties of the single crystal are evaluated by Cauchy pressure, Pugh criterion, shear anisotropy factor, and directional Young's modulus, and the Debye temperature is calculated. The calculation results are in good agreement with the experiment. The research in this paper provides a new idea for studying the properties of new bonding wires.

Effect of Au Addition on the Microstructure and Mechanical Properties of Nial Intermetallic Compound

Minor Ni addition improving mechanical property of Au–20Ag–10Cu alloy

Effect of Cr on solidification structure and microhardness of Al-Ni alloy

Mechanical Properties and Oxidation Characteristics of TiNiAl(Nb) Intermetallics

The effect of chromium additions on the mechanical properties of Ni-25Al-27.5Fe-based intermetallic compounds

Micro-alloying effects of Ni on the microstructure and mechanical properties of an Al-Zn-Mg-Cu-Sc-Zr alloy

Enhancement effect of Ni on the mechanical and thermodynamic properties of Au-xNi (x=0.5,1.0,1.5,2.0,2.5,3.0) alloy: a first-principles study

Effects of Super-gravity Field on Solidification Structure and Microhardness of Al-Ni-Cr Alloy

The Mechanical Properties of Intermetallic Ni50−xTi50Alx Alloys (X=6,7,8,9)

Effect of Ni addition on the microstructure, conductivities and mechanical properties of as-cast Al-Fe alloys

Alloying Effect on the Microstructure and Property of Single Crystal Ni 3 Al Alloys

The composite microstructures’ effect on the mechanical properties of Ni–25Al–xFe intermetallics

Effect of nickel on the microstructure and mechanical property of die-cast Al–Mg–Si–Mn alloy

Effects of co-addition of Ni and Al on precipitation evolution and mechanical properties of Fe-Cu alloy

Investigating the Influence of Al Contents on Microstructure and Mechanical Properties of Ni 3 Al Superalloy Fabricated by Twin Wire‐Based Direct Arc Energy Deposition

Microstructure and formation mechanism of Ni-Al intermetallic compounds fabricated by reaction synthesis

Effect of microalloying additions on microstructural evolution and thermal stability in cast Al-Ni alloys

Microstructure and Mechanical Properties of Cu–12Al–xNi Alloy Prepared Using Powder Metallurgy

Microstructure and Mechanical Properties of Ni3Al and Ni3Al–1B Alloys Fabricated by SHS/HE

Microstructures and Mechanical Behaviors of NiAlFe Intermetallic Compounds

Study on Structures Stability, Mechanical Properties, and Electronic Properties of Alloy Ag–Au–Al: First‐Principles Calculations and Experiments