Abstract:ABSTRACTDeveloped more than 80 years ago, the design procedure of concrete filled steel tubes (CFST) has several limitations that can still be found in most current international design standards. The two main limitations that present themselves are the lack of ability to achieve material enhancement when using high strength materials and restrictions on the geometry of the steel tube thickness to the overall column diameter. This geometric limitation is placed on the design to ensure that the steel tube remains ‘compact’. In complying with these constraints it is assumed in the design equations that local buckling of the steel tube will not take place before the ultimate global buckling load is achieved.With the introduction of higher strength materials, specifically when dealing with steel, the strength increase leads to the design of sections with increased slenderness. As the section becomes more slender, the ability to maintain the compact section limitations in the design codes becomes increasingly difficult. This paper looks at an experimental study on very thin‐walled steel tubes filled with high‐strength concrete and how localised buckling affects their compressive capacity.Adopting a diameter to thickness ratio of 200, 24 circular tubes were constructed using a high‐strength cold‐formed steel sheet, with yield stresses above 500MPa and filled with 100MPa concrete. Employing both thin‐walled sections and high strength materials, the effects of localised buckling in these composite members when subjected to compression has been studied. The experimental programme explored four main conditions; when both the steel and concrete were loaded and bonded together, when the concrete core inside the CFST was loaded, when the steel tube in the CFST was loaded and when the concrete core without the steel tube was tested.By studying the failure modes of both the concrete and the steel tube when acting compositely and individually, the experimental work shows that there is valid evidence to support the theory that even when using high strength materials in slender sections, confinement to the concrete core is provided. Finally, the results of the experimental work have been compared to the compressive design capacities predicted by current international design codes, showing that these provisions are conservative.

Application of Expansive Concrete in Concrete Filled Steel Tube

STUDY ON APPLICATION OF CONCRETE FILLED PRESTRESSING STEEL TUBULAR STRUCTURE

Experimental Research on Expansive Concrete Filled Square Steel Tube

Analytical Studies of Concrete-Filled Circular Steel Tubes under Axial Compression

Analytical Study of Circular Concrete-Filled Steel Tube Stub Columns under Axial Compression

Flexural strength analysis of non-post-tensioned and post-tensioned concrete-filled circular steel tubes

Axial Impact Behaviors of Stub Concrete-Filled Square Steel Tubes

Recent Developments in Concrete-Filled Steel Tubular Structures in China

Theory Of Concrete-Filled Steel Tubular Structures In China

Overview of the Current Research Status of Concrete-Filled Steel Tube

Concrete Filled Steel Tubular Structures from Theory to Practice

Numerical Analysis and Design of Concrete-Filled Wire Arc Additively Manufactured Steel Tube under Axial Compression

Expansive ultra-high performance concrete for concrete-filled steel tube applications

Compressive Tests of Thin-Walled Circle Concrete-Filled Steel Tubes

EXPERIMENT AND DESIGN OF DOUBLE SKINNED CONCRETE|FILLED STEEL TUBES

Experimental Investigation and Design of Concrete-Filled Steel Tubular CHS Connections

Experimental investigation of self-compacting concrete-filled weather steel tube stub columns

Study on Mechanical Properties of Concrete-Filled Steel Tubular Members under Axial Tension

LIMIT ANALYSIS OF EXPANSIVE CONCRETE-FILLED STEEL TUBE SHORT COLUMNS UNDER AXIAL COMPRESSION

The Study on Early-Age Expansion and Shrinkage Model of Massive Self-Compacting Concrete Pumped in Steel Tube Column

08.17: Experimental Behaviour of High‐strength Thin‐walled Concrete Filled Steel Tubular Stub Columns