Abstract:A high pressure electronic pneumatic pressure reducing valve, consisted of a two-position three-port pilot valve controlled by electromagnet and a piston type main valve, was proposed. The valve used a pressure sensor and a controller to constitute the closed-loop feedback. By consuming a little gas in the pilot valve, rapidity and stability of pressure regulation were preserved, the influences of pilot leakage on the valve and unexpected icing in pilot valve could be avoided. Then the characteristics were analyzed based on the structure and working principle of the valve, finally the simulation model including the vibration of gas supply pressure and load flow rate was built up with AMESim. Simulation results showed that steady pressure reduction could be achieved under the condition of gas supply pressure slowly reducing and load flow rate fluctuating in a big range. When gas supply pressure is 31.5MPa, the output pressure could be steady in 1~30 MPa without adjusting the controller parameters; the influences of machining errors on the valve were also simulated, the results showed that under-lap of pilot spool should be avoided to reduce gas consuming and 10 μm is a suitable choice for the height of annular clearance.

Research of Composite Control Technology on Inlet/Exhaust Pressure Adjustment System of Simulated Altitude Platform

Fuzzy Control on Pressure Reduction by Expander in High-pressure Pneumatic System

Design of High Pressure Reduction with Expander Pneumatic System' s Controller

Utrahigh Pressure Control Method Based on Fuzzy PID

Predictive PID Control of the Pressure Reduction by Expander in High-pressure Pneumatic System

Research on Two Key Technologies of Improving Dynamic Quality of Hydraulic System with High Flow

Modelling And High-Precision Constant Pressure Control Of The Pneumatic Suspension System

Collaborative Simulation and Integrated CMAC and PID Optimization and Control of an Aerial Work Platform

Pressure Regulation of Accumulator Based on Pressure Difference Control and Its AMESim Simulation

Simulation Of Controllable Pressure-Clearance Characteristic Of A High Pressure Pneumatic Chamber

Design and Study on a Simulating Platform of Shield Thrust System

Several key technologies of hydraulic system with high flow and high performance

Generalized predictive adaptive control and combination of simulation of aerial work platform

Design and Simulation of a High Pressure Proportional Pneumatic Pressure Reducing Valve

Modeling and Constant Pressure Control of Pneumatic Suspension System for Zero-Gravity Simulation

Simulation and Research of Pressure Regulator Valve in Boiler Feed-water Turbine Governing System

Simulation of pressure flow hybrid control of thrust hydraulic system of shield tunneling machines

Control System of Simulating Platform for Deep-Sea Extreme Environment

The Hydraulic System Design of High Pressure Servo-control Pulse Test Bed

High Precision Pressure Control in Large Closed Water Volume

Design of Aircraft Attitude Angle Automatic Control System Based on Fuzzy Control