Abstract:An adaptive wheel-legged shape reconfigurable mobile robot, based on a scissor-like mechanism, is proposed for an obstacle detecting and surmounting robot, moving on complex terrain. The robot can dynamically adjust its own shape, according to the environment, realizing a transformation of wheel shape into leg shape and vice versa. Each wheel-legged mechanism has one degree of freedom, which means that only the relative motion of the inner and outer discs is needed to achieve the transformation of the shape into a wheel or a leg. First, the force analysis of the conversion process of the wheel-legged mechanism is carried out, while the relationship between the driving torque and the friction factor in the non-conversion trigger stage and in the conversion trigger stage is obtained. The results showed that the shape conversion can be better realized by increasing the friction factor of the trigger point. Next, the kinematics analysis of the robot, including climbing the obstacles, stairs and gully, is carried out. The motion of the spokes tip is obtained, in order to derive the folding ratio and the surmountable obstacle height of the wheel-legged mechanism. The parameters of the wheel-legged structure are optimized, to obtain better stability and obstacle climbing ability. Finally, a dynamic simulation model is established by ADAMS, to verify the obstacle climbing performance and gait rationality of the robot, in addition to a prototype experiment. The results showed that the surmountable obstacle height of the robot is about 3.05 times the spoke radius. The robot has the stability of a traditional wheel mechanism and the obstacle surmount performance of a leg mechanism, making it more suitable for field reconnaissance and exploration missions.

Simulation analysis of passive adaptive robot's tip-over stability

Tip over Avoidance Control for Biped Robot

Online Dynamic Tip-Over Analysis for a Wheeled Mobile Dual-Arm Robot with an Improved Tip-Over Moment Stability Criterion

Stable walking control and strategy of under-actuated biped robot

Stability analysis and control method of a variable structure detection robot for underground rescue

Downhill Stability Analysis and Dynamics Simulation of the Six-wheel-legged Mobile Robot

Performance-Oriented Coordinated Adaptive Robust Control For Four-Wheel Independently Driven Skid Steer Mobile Robot

Design and analysis of multistage adaptive lateral deformation tracked robot

Heavy-duty hexapod robot sideline tipping judgment and recovery

Design on a Composite Mobile System for Exploration Robot

Research on stability of modular multi-legged robots with non-isomorphic configurations

Design and motion analysis of reconfigurable wheel-legged mobile robot

Analytic Solutions for Wheeled Mobile Manipulator Supporting Forces

Structural Design and Experimentation of Wheeled Home Monitoring Robot with the Obstacle Performance

Global Posture Stabilization for the Kinematic Model of a Rear-Axle Driven Car-Like Mobile Robot Considering Obstacle Avoidance

Research on Some Control Algorithms to Compensate for the Negative Effects of Model Uncertainty Parameters, External Interference, and Wheeled Slip for Mobile Robot

Stability Analysis of a Novel Mobile Spray-Painting Robot for Touch-Up Painting in Vehicle Repair Plant

A layered roll stability control strategy for commercial vehicles based on adaptive model predictive control

Modeling and Control of a Hybrid Wheeled Legged Robot: Disturbance Analysis

CONTROL STRATEGY ABOUT HUMANOID ROBOT STABLE LOCOMOTION ON UNEVEN GROUND

Structural design and motion characteristics analysis of dual-mode active swing arm tracked robot