Abstract:This paper proposes a smooth adjustment method for the instability problem that occurs during the start and stop of a multi-footed robot during attitude change. First, kinematics analysis is used to establish the mapping relationship between the joint angles of the robot support legs and the body posture. The leg joint angle is a known quantity that can be measured accurately and in real time. Therefore, when the position of the foot end of the support leg is unchanged, a unique set of joint angles can be obtained with the change of body posture at a certain moment. Based on the designed mapping model, the smooth adjustment of the posture can be achieved by the smooth adjustment of the support legs. Second, a constraint index that satisfies the requirements of the robot’s steady adjustment of the robot is given. The S-curve acceleration/deceleration method is used to plan the body’s attitude angle transformation curve, and then the mapping control relationship is used to obtain the control trajectory requirements of the joint to achieve smooth adjustment. In addition, this paper also gives a simple choice and motion control method for the redundancy problem caused by the number of support legs of a multi-footed robot when the attitude is changed. The simulation and prototype experiments verify and analyze the proposed method. The results of comparative experiments show that the posture adjustment method proposed in this paper has continuous acceleration without breakpoints, the speed changes gently during the start and stop phases of the attitude transformation, and there is no sudden change in the entire process, which improves the consistency of the actual values of the attitude planning curve with the target values. The physical prototype experiment shows that the maximum deviation between the actual value of the attitude angular velocity and the target value changes from 62.5% to 5.5%, and the degree of fit increases by 57.0%. Therefore, this study solves the problem of the instability of the fuselage when the robot changes its attitude, and it provides an important reference for the multi-footed robot to improve the terrain adaptability.

Research on stability of modular multi-legged robots with non-isomorphic configurations

Linear-time quasi-static stability detection for modular self-reconfigurable robots

Configuration of Industrial Robots Based on Reconfigurable Modularization and Its Statics Analysis

Development and Experimental Study of Multi-Motion Model Robot with Wheel-Track Compound Structure

Modeling and Virtual Decomposition Control with Stability Analysis for Multi-Arm-multi-joint Space Robot *

Topology Optimization of Biped Robot Based on Rigid-flexible Coupling Dynamics

Research progress on stability and control strategy for biped robots

Reconfiguration of stability and control strategy for some unmanned deformable vehicles

Reconfiguration and compensation design method for single-DoF closed-chain leg mechanism

A Stability Locomotion-Control Strategy for Quadruped Robots with Center-of-mass Dynamic Planning

Singular Configurations and Underactuated Balance Control for Biped Robot with Point Contact

Research on the Stationarity of Hexapod Robot Posture Adjustment

Stable Balance Adjustment Structure of the Quadruped Robot Based on the Bionic Lateral Swing Posture

3D-SLIP model based dynamic stability strategy for legged robots with impact disturbance rejection

Design and Control of a Multi-Locomotion Parallel-Legged Bipedal Robot

Stability analysis and control method of a variable structure detection robot for underground rescue

Structural Design and Experiment of a Small Wheel-legged Mobile Robot with Variable Configuration

Stability Design of a Stiffness-Controlled Robot Mechanism

Optimizing and designing a leg shape to increase robustness of a running robot on rough terrain

A novel distributed meta-module motion design for modular robotic systems based on grid partition method

Mechanism design and workspace analysis of a hexapod robot