Abstract:Strengthening by grain refinement via the Hall-Petch mechanism and softening by nanograin formation via the inverse Hall-Petch mechanism have been the subject of argument for decades, particularly for ultrafine-grained materials. In this study, the Hall-Petch relationship is examined for ultrafine-grained magnesium, aluminum, copper, and iron produced by severe plastic deformation in the literature. Magnesium, aluminum, copper, and their alloys follow the Hall-Petch relationship with a low slope, but an up-break appears when the grain sizes are reduced below 500-1000 nm. This extra strengthening, which is mainly due to the enhanced contribution of dislocations, is followed by a down-break for grain sizes smaller than 70-150 nm due to the diminution of the dislocation contribution and an enhancement of thermally-activated phenomena. For pure iron with a lower dislocation mobility, the Hall-Petch breaks are not evident, but the strength at the nanometer grain size range is lower than the expected Hall-Petch trend in the submicrometer range. The strength of nanograined iron can be increased to the expected trend by stabilizing grain boundaries via impurity atoms. Detailed analyses of the data confirm that grain refinement to the nanometer level is not necessarily a solution to achieve extra strengthening, but other strategies such as microstructural stabilization by segregation or precipitation are required.

Hall–Petch relationship in nanometer size range

Reverse Hall-Petch Relationship of Metals in Nanometer Size

FACTORS CONTROLLING THE STRONGEST SIZES IN THE INVERSE HALL–PETCH RELATIONSHIP

The strongest size in the inverse Hall-Petch relationship

Phase Field Crystal Simulation of Microscopic Deformation Mechanism of Reverse Hall-Petch Effect in Nanocrystalline Materials

A Modified Hall-Petch Relationship for Nanocrystalline Materials

Unraveling the Hall-Petch to Inverse Hall-Petch Transition in Nanocrystalline CdTe

Breaks in the Hall-Petch Relationship after Severe Plastic Deformation of Magnesium, Aluminum, Copper, and Iron

Influence of Temperature on the Inverse Hall–Petch Effect in Nanocrystalline Materials: Phase Field Crystal Simulation

Hall–Petch relationship in Ti3Al nano-polycrystalline alloys by molecular dynamics simulation

An explanation to the abnormal Hall-Petch relation in nanocrystalline materials

Hall-Petch relationship and deformation mechanism of pure Mg at room temperature

Hall-petch Relationship and Strain Rate Sensitivity of Nanocrystalline Mg - 5wt% A1 Alloy

Two-stage Hall-Petch Relationship in Cu with Recrystallized Structure

Transition Between Hall-Petch and Inverse Hall-Petch Behavior in Nanocrystalline Silicon Carbide

Hall-Petch Relation in a Spheroidized Carbon Steel with Emphasis on the Effect of Intergranular Particles

Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals

Inverse Hall-Petch relationship of high-entropy alloy by atomistic simulation

Temperature dependence of the Hall–Petch relationship in CoCrFeMnNi high-entropy alloy

Nanocrystalline gold with small size: inverse Hall-Petch between mixed regime and super-soft regime

A Regime Beyond the Hall–Petch and Inverse-Hall–petch Regimes in Ultrafine-Grained Solids