Abstract:The study on the simulation model of the metal oxide arrester (MOA) is of great significance to its production test and application. Simulation method is usually applied to MOA simulation test for some small and medium-sized enterprises with limited test conditions. The situation that there are a great wide variety of MOA models makes it more significant to study their applicability. The MOA simulation model research status was introduced in this paper, and three models, including IEEE model, Pinceti model and MWR model, were carried out by the Alternative Transient Program-Electromagnetic Transient Program (ATP-EMTP), where the Heidler current source and the RLC discharge circuit were used to produce different impulse currents, including 8/20 mu s, 30/80 mu s and steep current with front time about 1 mu s. Besides, the lightning impulse simulation of the whole arresters was experimentally researched under the nominal current. Then simulation results and experimental results were compared and analyzed according to the relative error of residual voltage and energy absorption. It is shown that the simulation waveform of the RLC discharge circuit is similar to the test waveform, which can effectively improve the problem of large relative error of the absorption energy, and the residual voltage simulation results of the three models are all good under 8/20 mu s and 30/80 mu s current. The IEEE model has shown good agreement in terms of the results of MOVs under steep current and the whole arresters under the nominal current. The difference between the two kinds of circuit design was analyzed, which can provide a reference for solving the problems in the current research, and improve work efficiency for testing institution.

Extracting Algorithm of Active Power Component of MOA Leakage Current Based on Orthogonal Decomposition

Mechanism Analysis of Power Load Using Difference Equation Approach

An Algorithm of Phase Difference Measurement Based on Fourier Series with Application in Detection of MOA

Calculation Method for the Resistive Current of Metal-Oxide Surge Arresters Using Model Parameters Solved by the Levenberg-Marquardt Algorithm

Description of On-Line Detection Technique on MOA Leakage Current

Leakage Current Sensor and Neural Network for MOA Monitoring

New Algorithm for State Estimation Based on Fast Decoupling of Distribution System's Asymmetrical Three-phase in Phase Coordinates

Novel metal-oxide arrester monitoring technology based on RFID sensor and mind evolutionary computation

The V-A Characteristics Under Steep-Front Waves of Metal Oxide Surge Arrester Model

Linear and nonlinear MOA modeling of electro-magnetic transient behavior

Digital Algorithm Based on Orthogonal Decomposition for Measurement of Dielectric Loss Factor

Moa Resistive Current On-Line Monitoring and Expert Diagnosis System

Applicability Analysis of Simulation Model of Metal Oxide Arrester and Experimental Study

Accuracy of Metal Oxide Surge Arrester Model under Steep-front Waves

A novel method for removal of DC component in non-sinusoidal signals of power systems

An Equation-Based Dynamic Nonlinear Model of Metal-Oxide Arrester and Its SPICE Implementation

Study of Parallel-composed Morphological Filter with Multiple Structuring Elements on the MOA On-Line Monitoring Data Processing

On-line monitoring technology for MOA on HV transmission line

Application Of Wavelet Transform On Measurement Of Leakage Current Of Zinc-Oxide Lightning Arresters

Accuracy Analysis of Metal-Oxide Arrester Simulation Models Considering the Energy Absorption Estimation Under Impulse Currents With Different Steepness

Experimental Validation of Moa Simulation Models for Energy Absorption Estimation under Different Impulse Currents