Abstract:The air-coupled ultrasonic technique is capable of detecting defects in in-service CFRP plates and ensuring their application safety. Traditional air-coupled ultrasonic methods often rely on the linear defect index, which is not effective in characterizing small-size defects. Additionally, the scanning step length completely limits their imaging spatial resolution, resulting in the contradiction between imaging spatial resolution and detection efficiency. To address the above problems, the nonlinear defect index and the adaptively weighted imaging algorithm are proposed. The nonlinear defect index uses the relatively nonlinear coefficient of the Lamb wave to enhance the ability to detect small-size defects. Considering the beam width, the adaptively weighted imaging algorithm constructs the relationship between any imaging point and all scanning paths. At this time, the imaging spatial resolution can be set arbitrarily, eliminating the dependence on the scanning step length. The experimental results demonstrate that the proposed nonlinear defect index can characterize the small-size defect more accurately than the linear defect index. When the scanning step length is increased to improve detection efficiency, the adaptively weighted imaging algorithm can achieve better imaging spatial resolution compared to the traditional defect probability imaging algorithm. For the small-size defect with a diameter of 10 mm, the proposed method has an area detection error of only 7.8 %, whereas the traditional method has an error of 22.4 %. The proposed method is promising to detect small-size defects of in-service CFRP plates in the aircraft skin.

Study on Non-Destructive Testing of Aerial Complex Material by DSPI

Speckle Average Technique For Dspi Static Deformation Measurement

Depth-sensing Indentation Measurement and Finite Element Analysis of Residual Stress Field Near Fatigue Crack Tip

A Method for Improving Quality of DSPI Measurement

Nondestructive Testing of Thin Composite Structures for Subsurface Defects Detection Using Dynamic Laser Speckles

Surface Patterning for Multi-Scale Strain Analysis of In-Situ Sem Mechanical Experiments

Digital Speckle Correlation and its Applications

Detection and Analysis of Aircraft Composite Material Structures Using UAV

Dynamic Measurement of Plastic Deformation Field by ESPI

A Novel, Non-Contact NDT Scanner Case Study: Thickness Measurement, Debonding and Defects Detection in Metallic and Composite Parts

Visualized characterization of diversified defects in thick aerospace composites using ultrasonic B-scan

High/Low-Precision Digital Speckle Pattern Interferometry for Vibration Measurement

The Application Of Electric Speckle Shearography Pattern Interferometry In The Nondestructive Testing Of Fiber Composite Materials

Detecting delamination defects in CFRP plates using nonlinear defect index of air-coupled Lamb waves and adaptively weighted imaging algorithm

A Review On Shm Techniques And Current Challenges For Characteristic Investigation Of Damage In Composite Material Components Of Aviation Industry

A Feasible Surface Patterning Method for SEM-DIC: Achieving High-Resolution In Situ Mapping of Local Strain and Microstructure to Reveal the Effect of Slip Transfer on Shear Strain Near Grain Boundaries

Numerical Analysis of the Measuring Errors in Quantitative Detection of Defects with Shearing Speckle Pattern Interferometry

Nondestructive testing by ESPI and quasi phase shift gradient technique

Infrared defect recognition technology for composite materials

Full-field deformation measurement and cracks detection in speckle scene using the deep learning-aided digital image correlation method

Simulation of Dual-Function Speckle Interferometry for the Measurement of Out-of-plane Displacement and Slope