Abstract:The connection of gasifier to the radiant syngas cooler has been regarded as a key technology for heat recovery System. Multiphase flow and heat transfer processes presented in this work considers particle deposition and radiation model to mixture of non-gray gas with particles. An axisymmetric simulation of the multiphase flow in an industrial scale connection is performed. The standard k-epsilon model, Renormalization group (RNG) k-epsilon model and Realizable k-epsilon model turbulence model are proposed. The particle motion is modeled by discrete random walk model. The discrete ordinates model (DOM), P-1 and discrete transfer model (DTRM) are used to model the radiative heat transfer. The effect of particles on the radiative heat transfer was taken into account when the DOM and P-1 model were used. The absorption coefficient of the gas mixture is calculated by means of a weighted-sum-of-gray-gas (WSGG) model. The results with the DOM and P-1 model are very similar and close to practical condition. A large number of particles are deposited oil the cone of gasifier which is the top of connection. Maximum temperature difference is approximate 7 K when the cooling tube heights change from 0.5 in to 1.5 m. The temperature inside has a linear relationship with operating temperature. (c) 2009 Curtin University of Technology and John Wiley & Soils, Ltd.

Characteristic Investigation on Unsteady Heat Transfer Between Gas and Solids

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Dynamic and Steady-State Characterization of the Liquid Spray Zone in an Externally Heated Gas–Solid Fluidized Bed

Particle Fluidization Characteristics and Transition in a Hot Gas-Solid Fluidized Bed with Liquid Injection

Investigation into Gas–solid Heat Transfer in a Cryogenic Vibrated Fluidised Bed

Numerical modelling of heat transfer between gas and solid in a vibrated fluidised bed

Investigation On The Regenerator Performance Using Gas Mixtures

Study on Hydrodynamics and Mass Transfer Characteristic of a New Gas-liquid Reactor

Numerical Studies of Supercritical Turbulent Convective Heat Transfer of Cryogenic-Propellant Methane

Research on the particle scale gas and solid non-gray thermal radiation transfer

Numerical investigation of transient gas–solid heat transfer in a packed bed: Impact of intra-particle thermal diffusion

Numerical Investigation on 3D Unsteady Fluid Flow and Heat Transfer in a Regenerator

An Investigation on Heat Transfer Characteristics of Sub-Critical and Supercritical Pressure Steam-Liquid in an Inclined Internally Ribbed Tube

Effect of Operating Parameters on Gas‐Solid Hydrodynamics and Heat Transfer in a Spouted Bed

AREA MODEL OF HEAT TRANSFER BETWEEN GAS AND SOLID IN THE FLUIDIZED BED

An experimental study of heat transfer characteristics of a cryogenic finned-tube heat exchanger

Numerical simulation of heat transfer in regenerator of solid adsorption refrigeration system

Simulation Study on Heat Transfer Characteristics of Coal Synthesis Gas Installations

STUDY OF HEAT TRANSFER OF FINNED TUBE HEAT EXCHANGER FOR CRYOGENIC LIQUIDS

Numerical Analysis of Heat Transfer and Solid Volume Fraction Profiles Around a Horizontal Tube Immersed in a Supercritical Water Fluidized Bed

Numerical Simulation Of Flow And Heat Transfer In Connection Of Gasifier To The Radiant Syngas Cooler