Applications of Matlab and Flash in Chemical Engineering Calculating

Guan Jinming,Hu Guangzhou

DOI: https://doi.org/10.3969/j.issn.1009-2374.2007.05.039

2007-01-01

Abstract:MATLAB is a powerful computing software.Matlab can efficiently solve calculation of unit operations of chemical engineering.In this paper,mainly introducing applications of flash an matlab through one example of Flash assisting matlab in chemical engineering calculating.

What problem does this paper attempt to address?

Applications of Computer-Aided Engineering(CAE) in Chemical Machinery

Shuiguang Tong

2005-01-01

Abstract:The concept of CAE and some major softwares suitable for chemical machinery were presented.The applications of CAE in chemical machinery at home and abroad were analyzed,and an application sample was given.
Study on application of MATLAB for solving linear equations in chemical engineering calculation

Wujiu Chen,Tao Liu,Hongbin Cai,Qiang Guo,Rongxiang Zhao,Chengli Su,Yan Zhang

DOI: https://doi.org/10.3969/j.issn.1002-106X.2013.12.012

2013-01-01

Abstract:The application of MATLAB (Matrix Labratory) in material balance for chemical engineering calculations is introduced through 5 typical examples of benzene hydrogenation to cyclohexane, propane combustion, a water gas conversion process, a three stage cuntercurrent washing process and correction of material balance of butane dehydrogenation to butene. The chase method of tridiagonal equations, ill-conditioned equations, iterative method of Gauss-Siedel can be worked out by the command x =A\b of MATLAB. MATLAB software makes it accurate, stable, rapid and low running costs to conduct linear equations of chemical engineering calculation.
Computer-aided calculating in data analysis of pharmaceutics with Microsoft Excel

Yu Guanghua,Wang N

DOI: https://doi.org/10.3969/j.issn.1001-4160.2007.11.025

2007-01-01

Abstract:Objective:To describe the application of Microsoft Excel in aided computing of pharmaceutic data analysis.Methods:The theory and methods of the pharmaceutic data analysis in Excel were analyzed and built the mathematical model of the problem calculated with the Excel's commends and functions.Results:Excel may be used in the calculating of the matrix,evaluation of the liner and non- linear equations,value inserting,differential equation,integral equation,model fitting and mathematical optimization design.Conclu- sion:By the application of Excel,the theory and methods of the data analysis in pharmaceutical calculating may be expressed clearly, understood and used casily,so the related concept,method,process and result are visualized.
APPLICATION OF MATLAB(SIMULINK) IN CALCULATION OF PULP AND WATER EQUATION IN PAPER PROCESS

Mu-yi HU,Tie-shan CHEN,Lian-kui DAI,Zhao-xia CHEN

DOI: https://doi.org/10.3969/j.issn.1673-5854.2005.03.006

2005-01-01

Abstract:Calculation of pulp and water equation in papermaking is both an important and complex process. During the calculation mistakes must be excluded in time, otherwise any mistake will impact the whole calculation. This paper introduced how to use a dynamic system simulation tool SIMULINK to simulate the process of pulp and water equation calculation which reduced the complexity of calculation, modified the technics flow, and it is very convenient for checking up. The simulation mode is very general, flexible and expandle.
Simulation and Optimization of Chemical Process Using GAMS Mix Pattern

Hao Li,Zhijiang Shao

DOI: https://doi.org/10.1109/wcica.2006.1713296

2006-01-01

Abstract:Rigorous simulation and optimization of chemical process systems usually is based on a realistic calculation of the physical properties. Within GAMS models, nonlinear functions for the realistic calculation leads to very complex models and greatly increased dimensions. By using the new mechanism, a mix pattern with external functions, the situation can be improved by transferring calculation procedures to an external module. In this work, the external functions, written in the programming language Fortran, are used for the physical properties calculation in the flash process of a distillation column. The accuracy of the result is comparable to standard simulation software
Applications of Computer in Engineering Especially in Electrolysis Magnesium Industry

Ze Sun,Bing Li,Jianguo Yu

DOI: https://doi.org/10.1109/etcs.2009.770

2009-01-01

Abstract:In modern times, computers have closely connection with everyone, especially scientist and engineer. Computer programs can now solve difficult problems in a fraction of the time it used to take. Computer-Aided engineering is a powerful tool and necessary for engineering design and manufacture. Nowadays, you no longer have to write your own software programs to use computers effectively. In chemical engineering, a lot of softwares are used in the process of chemical operation, Such as the software for process of chemical engineering Proiquest and Aspen, and Computational fluid dynamics software Fluent and CFX and so on. The details of the process and unite operation can be investigated by computer and software. During electrolysis magnesium, high temperature and airproofed operation condition prevent the study of fluid phenomena in the electrolytic cell. The computational fluid dynamics can overcome these difficulties. Details of the flow field of electrolytic cell can be visualized on the computer screen. Through the visualization, flow field of electrolytic cell and the factors that affect the electrolysis process can be investigated.
Quick Calculation and Applications of Adiabatic Flash

Leyi Gu

2004-01-01

Abstract:The calculation of adiabatic flash was simplified with a heat analysis. The target value was taking the heat quantity of constant temperature adiabatic flash as zero, a calculation was performed by using the function of solving the target value of a computer, the heat quantity calculation was simplified based on the gasification potential heat of adiabatic flash coming from the sensitive heat of liquid. An EXCEL electronic table for quick calculation of adiabatic flash was complied. The flash applications in many ways could be calculated using the table, and some application examples were provided.
A Novel Fast Dynamic Optimization Approach for Complex Multivariable Chemical Process Systems

Ping Liu,Guodong Li,Xinggao Liu,Zeyin Zhang

DOI: https://doi.org/10.1002/cjce.22633

2016-01-01

Abstract:A novel fast dynamic optimization approach is proposed for complex multivariable chemical process systems, where the control variables are parameterized with different non-uniform time grids and are treated as optimal decision variables to obtain the optimal switching structures for tackling the shortcoming caused by the conventional uniform parameterization method. Meanwhile, an adaptive fast calculation approach is proposed to calculate the differential equations so as to decrease the optimization time. The gradient formulae of decision variables are therefore further derived so that the conventional gradient-based optimization algorithm can be utilized easily. Two well-known complex multivariable systems in engineering are tested as illustrations and are compared with other literature reports in detail, where the uniform discretization control vector parameterization (ud-CVP) method is also developed as the comparative base. Numerical results show that the proposed method can achieve better optimization results with fewer parameters and lower computation costs.
The Application of Excel Software in Chemical Thermodynamics Calculation

Lihai Zhai,Baiwang Sun,Lihong Guo,Min Liu

DOI: https://doi.org/10.12783/dtcse/icte2016/4831

2016-01-01

Abstract:This paper expounds the basic knowledge of Excel and wherein the solving tools were, and their practical application for chemical thermodynamics calculation have been introduced. The Excel tools such as fill handle, citation of relative address, repeated operation and goal seek have been used to solve problems in chemical engineering calculation. The specific operation steps were illustrated in examples. The method is simple and fast, greatly improving the calculation efficiency, can be effectively applied in the related thermodynamic calculation.
VLE Calculation for Flash Process with Chemical Reactions

Yu Zhijia,Li Xiangqin,Lan Zhong,Zhang Naiwen

DOI: https://doi.org/10.3969/j.issn.1000-6168.2013.03.020

2013-01-01

Abstract:A part of extended contents is proposed after flash calculation is discussed based on teaching experience on the courses of "Chemical Engineering Thermodynamics" and "Chemical Process Calculation".The Flash equations are derived based on material balance of the process with a chemical reaction.Several peculiar situations are discussed.And finally,a method developed from the flash equation is presented,by which one can identify the chemical state of the mixture.The extended consideration will benefit the students a lot who are capable for learning extra knowledge.
Application of Matlab in Teaching of Physical Chemistry Experiment

石雷,范长春,陈晓芳

DOI: https://doi.org/10.3969/j.issn.1002-4956.2008.11.031

2008-01-01

Abstract:In view of present situation in physical chemistry experiment curriculum,this paper introduces Matlab software,which uses in the data processing method of physical chemistry experiment and takes determination of the surface tension of solution with the biggest bubble experiment as an example.The practice proves that the use of Matlab can reduce the man-made errors and facilitate the teaching and learning.
THE APPLICATION OF MATLAB IN TEACHING COMPUTATIONAL PHYSICS

Zhang Jie

DOI: https://doi.org/10.3969/j.issn.1000-386X.2005.06.052

2005-01-01

Abstract:Some applications of Matlab on the teaching of computational physics (such as Monte-Carlo simulation,numerical calculation,symbolic calculation etc.)are introduced.It shows that the Matlab has a great power,It is easy to use.It makes the teaching visually and saves teaching time.It's an effective and efficient tool in teaching computational physics.
Application of Blending Teaching in Unit Operations of Chemical Engineering based on Internet Interactive Teaching Platform

Xiuxia Meng,Fangyong Yu,Feng Song,Lushan Yu,Naitao Yang,Ping Wang,Zhongjun Fu

DOI: https://doi.org/10.3969/j.issn.1007-1865.2018.02.087

2018-01-01

Abstract:The principle of chemical engineering is an important engineering basic course in process engineering. It is very important to set up the engineering concept and cultivate the students' ability of engineering practice. In the traditional teaching mode, students are short of previewing,leading to the unreliable knowledge. Based on the Internet interactive teaching platform, blending teaching and learning are adopted in the principles of chemical engineering, in which students are taken as the center of knowledge learning. Students' initiatives are fully mobilized; their ability of autonomous learning is improved; the spirit of teamwork is cultivated. The terminal achievement shows that all students successfully pass the examination and reach the designed goal.
Assistant Teaching of Chemoinformatics by Graphical User Interface of Matlab

Xia WU,Wen CHENG

DOI: https://doi.org/10.3969/j.issn.1001-9677.2014.18.080

2014-01-01

Abstract:Chemometrics was a useful subject by using informatic , computer science and technology to solve chemical problem.Graphical user interface ( GUI) of scientific computing software Matlab was introduced , and the advantages of GUI in the assistant teaching of chemometrics were demonstrated by a specific example of molecular modeling .Interactive GUI made the molecular simulation visual , and the combination of theoretical and practical teaching was helpful to improve the effect of teaching and simulate interest in learning .
Applications of Materials Studio and Matlab Software Packages in the Chemical Kinetics Teaching

CHEN Xin,LI Biao,YAO Jun,ZHU Yuan-Qiang

DOI: https://doi.org/10.3866/pku.dxhx201506008

2016-01-01

Daxue Huaxue

Abstract:: In teaching chemical kinetics, especially for the transition-state theory and steady-state approximation method, the use of Materials Studio and Matlab software can help visualize the learning of the abstract chemical theory. This facilitates the cultivation of imaginary thinking of the students, enhances the teaching effects, and motivates students′ interest in learning physical chemistry.
Applications and Advances in Computer for Chemical Engineering

杨榛,浦伟光,隋志军,魏永明

DOI: https://doi.org/10.3969/j.issn.1001-4160.2010.02.002

2009-01-01

Chemistry World

Abstract:At present,computer application technologies are increasingly penetrated into all aspects of chemical engineering and will lead to comprehensive changes and advances in chemical engineering.The main applications and advances in chemical engineering design,chemical engineering production,scientific research,teaching and learning are introduced. Finally,future development trends of computer applications in chemical engineering are discussed.
Cultivation of Divergent Thinking Ability in Teaching of Applications of Computer in Chemical Engineering

Wang Shuai,Zhong Hong,Xia Liuyin,Liu Guangyi,Cao Zhanfang

DOI: https://doi.org/10.3969/j.issn.1007-1865.2011.03.088

2011-01-01

Abstract:In order to meet the inevitable requirement of talent training for chemical intudtry in the new period,computer education must be merged into chemical engineering education.As a typical example in chemical engineering thermodynamics,the solving method of molar volume of n-butane is discussed by using Excel,Matlab,MathCAD and Aspen Plus to solve an equation of higher degree.The results showed that the methods of direct iteration method and goal seek method in Excel,solving method by fzero function in Matlab,solving method by root function and newton iteration method in MathCAD and properity analysis in Aspen Plus,are proved to be convenient,accurate and effective.
Exploration of Auxiliary Teaching in Nuclear Reactor Engineering with MATLAB

Li-hua HE,Tao YU,Guo-pu QU,Xiao-hua LI,Jin-sen XIE

DOI: https://doi.org/10.3969/j.issn.1005-3638.2014.06.017

2014-01-01

Abstract:MATLAB simulation software is a powerful set of numerical computation and visualization software,widely used in the control system modeling,analysis and design. The course' s characteristics of the nuclear reactor engineering were brief introduced. Through examples the specific applications of the MATLAB in nuclear reactor engineering courses were mainly discussed. practice has proved that:MATLAB applied to teaching and research in nuclear reactor engineering cour-ses can help students understand and grasp more abstract issues,and improve teaching effectiveness and the quality of teaching.
The Application of MATLAB in Physics Experimental Education

ZHONG Hui-lin,WU Fu-gen

DOI: https://doi.org/10.3969/j.issn.1671-623x.2006.z1.045

2006-01-01

Abstract:The language of MATLAB is applied to the simulation of two physics experiments,and the result can be used to enhance the effect of physics experiment.
Application of Mixed-Programming of VB and MATLAB in Engineering

Ouyang Ming,Li Yuqing,Zeng Haixia,Wang Hongliang

DOI: https://doi.org/10.3969/j.issn.1000-0755.2009.07.003

2009-01-01

Abstract:Aiming at the respective advantages of VB (Visual Basic) and MATLAB, the necessity of mixing- programming with these two softwares is analyzed in this paper. And the implementation of their interface connection is introduced. An practical example is given to illustrate the application of mixed-programming with VB and MATLAB in engineering.

Applications of Matlab and Flash in Chemical Engineering Calculating

Applications of Computer-Aided Engineering(CAE) in Chemical Machinery

Study on application of MATLAB for solving linear equations in chemical engineering calculation

Computer-aided calculating in data analysis of pharmaceutics with Microsoft Excel

APPLICATION OF MATLAB(SIMULINK) IN CALCULATION OF PULP AND WATER EQUATION IN PAPER PROCESS

Simulation and Optimization of Chemical Process Using GAMS Mix Pattern

Applications of Computer in Engineering Especially in Electrolysis Magnesium Industry

Quick Calculation and Applications of Adiabatic Flash

A Novel Fast Dynamic Optimization Approach for Complex Multivariable Chemical Process Systems

The Application of Excel Software in Chemical Thermodynamics Calculation

VLE Calculation for Flash Process with Chemical Reactions

Application of Matlab in Teaching of Physical Chemistry Experiment

THE APPLICATION OF MATLAB IN TEACHING COMPUTATIONAL PHYSICS

Application of Blending Teaching in Unit Operations of Chemical Engineering based on Internet Interactive Teaching Platform

Assistant Teaching of Chemoinformatics by Graphical User Interface of Matlab

Applications of Materials Studio and Matlab Software Packages in the Chemical Kinetics Teaching

Applications and Advances in Computer for Chemical Engineering

Cultivation of Divergent Thinking Ability in Teaching of Applications of Computer in Chemical Engineering

Exploration of Auxiliary Teaching in Nuclear Reactor Engineering with MATLAB

The Application of MATLAB in Physics Experimental Education

Application of Mixed-Programming of VB and MATLAB in Engineering