GPU-accelerated Approach for 2D Fracture Analysis of Structures Combining Finite Particle Method and Cohesive Zone Model
Yufeng Kang,Yanfeng Zheng,Siyuan Li,Jingyao Zhang,Jingzhe Tang,Chao Yang,Yaozhi Luo
DOI: https://doi.org/10.1016/j.engfracmech.2024.110198
IF: 5.4
2024-01-01
Engineering Fracture Mechanics
Abstract:The fracture analysis of structures typically involves strong discontinuity and nonlinear behaviors, and it requires fine meshing and small time steps, making it time-consuming. This study proposes an approach accelerated by Graphics Processing Units (GPU) for two-dimensional (2D) fracture analysis of structures combining finite particle method (FPM) and cohesive zone model (CZM). Specifically, the equations of motion of particles are presented, and the internal forces of planar triangular elements are derived based on FPM. Subsequently, the internal forces of four-particle cohesive element are derived to describe the CZM, and the linear elastic stage, softening stage, and failure stage are depicted according to the traction-separation criteria. An explicit GPU-based FPM analysis strategy for structural fracture analysis is then developed, and the parallel solvers for particles, triangular elements, and cohesive elements are implemented. A quasi-static fracture analysis of a concrete beam and a dynamic fracture analysis of the Kalthoff problem is conducted to verify the effectiveness of the proposed approach. The obtained crack propagation path, load vs. displacement curves, and crack propagation speed are in good agreement with the experimental results and the results in the literature. The efficiency of the proposed approach is also investigated. The achieved maximum speedup ratio of the GPU-accelerated approach to the CPU (central processing unit)-based approach reaches around 24, and the achieved speedup ratio relative to the commercial finite element software Abaqus/Explicit reaches around 11.5, demonstrating the computational efficiency of the proposed approach.