Abstract:Most traditional rigid grippers can cause damage to the surface of objects in actual production processes and are susceptible to factors such as different shapes, sizes, materials, and positions of the product. This article studies a flexible finger for flexible grippers, more commonly described as PneuNet, designs the structure of the finger, discusses the processing and manufacturing methods of the flexible finger, and prepares a physical model. The influence of structural parameters such as the thickness of the flexible finger and the angle of the air chamber on the bending performance of the finger was analyzed using the Abaqus simulation tool. An RBF-PID control algorithm was used to stabilize the internal air pressure of the flexible fingers. A flexible finger stabilization experimental platform was built to test the ultimate pressure, ultimate bending angle, and end contact force of the fingers, and the simulation results were experimentally verified. The results show that when the thickness of the flexible finger is 2 mm and the air chamber angle is 0 deg, the maximum bending angle of the flexible finger can reach about 136.3°. Under the same air pressure, the bending angle is inversely correlated with the air chamber angle and finger thickness. The experimental error of the bending angle does not exceed 3%, which is consistent with the simulation results as a whole. When the thickness is 2 mm, the maximum end contact force can reach about 1.32 N, and the end contact force decreases with the increase in the air chamber angle. The RBF-PID control algorithm used has improved response speed and a better control effect compared to traditional PID control algorithms. This article provides a clear reference for the application of flexible fingers and flexible grippers, and this research method can be applied to the analysis and design optimization of other soft brakes.

Pneumatic Miniature Robotic System Based on Adaptive Fuzzy PID Regulator

An Intelligent Adaptive Robust Controller Based on Neural Network for a Pneumatic System

Position Servo Control for Pneumatic Actuator with Fuzzy PID

Error-modified Event-triggered Adaptive Robust Control F or Pneumatic Cylinders Using Embedded Controller

Hybrid fuzzy PID control of hydraulic robot

Predictive Function Control of Hydraulic Robot

A Fuzzy Control Method based on Central Pattern Generator for QuadrupedRobots

Control of a Soft Inchworm Robot With Environment Adaptation

Adaptive Robust Control of Pneumatic Cylinders Using Fast Switching On/off Solenoid Valves

Fuzzy adaptive PID control method for multi-mecanum-wheeled mobile robot

Research on Driving Wheel Control of Cleaning Robot Based on Fuzzy Adaptive Tuning PID

Adaptive PID Saturate Output Feedback Control of Robot Manipulators

A Novel Robotic Motion Control Strategy Based on Improved Fuzzy PID and Feedforward Compensation

Precision Positioning System Based on Intelligent Fuzzy-PID Control

Development of a Novel Robotic Catheter Manipulating System with Fuzzy PID Control

Application of Adaptive Fuzzy PID Controller to Nano-scale Precision Motion Stage System

Control of a Path Following Cable Trench Caterpillar Robot Based on a Self-Coupling PD Algorithm

A New Type of Squirmy Pneumatic Micro-pipeline Robot

Single chip self-tunable N-input N-output PID control system with integrated analog front-end for miniature robotics

Structural Design and Control Performance Study of Flexible Finger Mechanisms for Robot End Effectors

Constant Force PID Control for Robotic Manipulator Based on Fuzzy Neural Network Algorithm